Skip to main content
The search returned 88 results
Now showing 1 - 10 of 88
  • Some of the metrics are blocked by your 
    Item type:Publication, Access status: Open Access ,

    2D gravity modelling in Central Italy: Clues for the seismogenesis in the Apennines

    (Elsevier BV:PO Box 211, 1000 AE Amsterdam Netherlands:011 31 20 4853757, 011 31 20 4853642, 011 31 20 4853641, EMAIL: nlinfo-f@elsevier.nl, INTERNET: http://www.elsevier.nl, Fax: 011 31 20 4853598, 2026-02-03) ; ; ; ;
    In the Central Apennines (Italy), the most updated reliable 3D geological models of the crust in the area affected by the 2016-17 Amatrice-Visso-Norcia seismic sequence highlighted that the coseismic rupture at the surface can involve old inherited normal faults, while the seismogenic sources lay at depth, possibly reactivating and inverting previous thrust faults, as in the case of the Mw 6.5 Norcia earthquake (30 October 2016). Here, we present a 2D gravity model across the Central Apennines to complete and confirm the crustal geometries resulting from the 3D model itself. The cross-section was built by integrating different data types, including surface geology, hydrocarbon wells, seismic profiles, and results from receiver function analysis. It was then checked against gravity anomalies and the velocity distribution from Local Earthquake Tomography (LET), adding further details, and, finally, against seismicity recorded during the 2016-2017 sequence. The results substantiate the reliability of the geometries proposed in the RETRACE-3D model, as they fit well, except for some local misfits, with other independent data, such as the Bouguer anomalies and the velocity distribution from LET. Furthermore, integrating different data types allowed us to provide a detailed description of the structural setting of the Apennine chain and the surroundings of the RETRACE-3D study area and to identify some new features at seismogenic depths beyond those typically targeted in hydrocarbon exploration. In particular, we were able to investigate the nature of the basement top and its relationship with seismotectonics. Plain language summary: Specific knowledge of the Earth's crust structures and our ability to image them in three dimensions are crucial for improving the understanding of the tectonic processes, particularly those responsible for generating earthquakes. The RETRACE-3D project produced a 3D model of the crust down to depths of 5-10 km in the area of the Central Apennines hit by the 2016-2017 seismic sequence. In this study, we analysed the gravity anomalies along a 2D cross-section to validate these results and to extend our knowledge to the surrounding areas and greater depths. Gravity anomalies make it possible to detect density variations within the crust, which can be related to the presence of specific geological units. Our analysis validated the RETRACE-3D project findings and provided insights into the nature of the upper crust at the base of the sedimentary succession. In particular, we identified an ancient (Permian-Triassic) sedimentary body, whose presence and current position appear to be closely related to the seismotectonics of the area.
      7  94
  • Some of the metrics are blocked by your 
    Item type:Publication, Access status: Open Access ,

    Global distribution of ear thquake-f ault dip angles

    The dip angle is one of the fault parameters that most affect fault-related hazard analyses (ground shaking, tsunami) because it not only influences the inference of other fault parameters (e.g. down-dip width, earthquake maximum magnitude based on fault scaling relations) but also and most importantly, the dip angle controls: (a) the fault-to-site distance values of ground motion estimates based on predictive models (Ground Motion Models); (b) the ground shaking predicted by physics-based simulations; and (c) the vertical component of static surface displacement, which determines the initial conditions for tsunami simulations when the seafloor is displaced. We present the results of a global survey of earthquake-fault dip angles (G-DIP, short for Global Dip) and analyse their empirical distribution for various faulting categories (normal, reverse, transcurrent crustal faulting and subduction-interface reverse faulting). These new empirical statistics are derived from an extensive and homogeneous data set of 597 uniquely determined fault plane dip angles corresponding to 269 individual earthquakes. As such, our statistics of fault dip occurrences separated by fault types at a global scale improve previous fault dip-angle distributions. We found significant differences between the average empirical fault dip-angle distributions and the values usually assumed based on Anderson's theory. Dip-slip crustal faults show the same mode at 40°–50° for both normal and reverse mechanisms, whereas transcurrent faults have a large spread of values below the mode at 80°–90°. Regarding reverse crustal faults, our result became evident after separating them from subduction interface faults, which show significantly lower dip values, with a mode at 10°–20°. We remark on the importance of documented uniquely determined fault planes to develop dip-angle statistics. We also suggest that our results can effectively be used as distribution priors for characterizing the geometry of poorly known seismogenic faults in earthquake hazard analyses and earthquake-fault modelling experiments.
      9  22
  • Some of the metrics are blocked by your 
    Item type:Product, Access status: Open Access ,
      32  19
  • Some of the metrics are blocked by your 
    Item type:Publication, Access status: Open Access ,

    The European Fault-Source Model 2020 (EFSM20): geologic input data for the European Seismic Hazard Model 2020

    (2024-11-19) ; ; ; ;
    Pires Vilanova, Susana
    <jats:p>Abstract. Earthquake hazard analyses rely on seismogenic source models. These are designed in various fashions, such as point sources or area sources, but the most effective is the three-dimensional representation of geological faults. We here refer to such models as fault sources. This study presents the European Fault-Source Model 2020 (EFSM20), which was one of the primary input datasets of the recently released European Seismic Hazard Model 2020. The EFSM20 compilation was entirely based on reusable data from existing active fault regional compilations that were first blended and harmonized and then augmented by a set of derived parameters. These additional parameters were devised to enable users to formulate earthquake rate forecasts based on a seismic-moment balancing approach. EFSM20 considers two main categories of seismogenic faults: crustal faults and subduction systems, which include the subduction interface and intraslab faults. The compiled dataset covers an area from the Mid-Atlantic Ridge to the Caucasus and from northern Africa to Iceland. It includes 1248 crustal faults spanning a total length of ∼95 100 km and four subduction systems, namely the Gibraltar, Calabrian, Hellenic, and Cyprus arcs, for a total length of ∼2120 km. The model focuses on an area encompassing a buffer of 300 km around all European countries (except for Overseas Countries and Territories) and a maximum of 300 km depth for the subducting slabs. All the parameters required to develop a seismic source model for earthquake hazard analysis were determined for crustal faults and subduction systems. A statistical distribution of relevant seismotectonic parameters, such as faulting mechanisms, slip rates, moment rates, and prospective maximum magnitudes, is presented and discussed to address unsettled points in view of future updates and improvements. The dataset, identified by the DOI https://doi.org/10.13127/efsm20 (Basili et al., 2022), is distributed as machine-readable files using open standards (Open Geospatial Consortium). </jats:p>
      14  70
  • Some of the metrics are blocked by your 
    Item type:Publication, Access status: Open Access ,

    Buried Alive: Imaging the 9 November 2022, Mw 5.5 Earthquake Source on the Offshore Adriatic Blind Thrust Front of the Northern Apennines (Italy)

    The prompt identification of faults responsible for moderate-to-large earthquakes is fundamental for understanding the likelihood of further, potentially damaging events. This is increasingly challenging when the activated fault is an offshore buried thrust, where neither coseismic surface ruptures nor GPS/InSAR deformation data are available after an earthquake. We show that on 9 November 2022, an Mw 5.5 earthquake offshore Pesaro ruptured a portion of the buried Northern Apennines thrust front (the Cornelia thrust system [CTS]). By post-processing and interpreting the seismic reflection profiles crossing this thrust system, we determined that the activated fault (CTS) is an arcuate 30-km-long, NW-SE striking, SW dipping thrust and that older structures at its footwall possibly influenced its position and geometry. The activation of adjacent segments of the thrust system is a plausible scenario that deserves to be further investigated to understand the full earthquake potential of this offshore seismogenic source.
      635  273
  • Some of the metrics are blocked by your 
    Item type:Product, Access status: Open Access ,
      53  383
  • Some of the metrics are blocked by your 
    Item type:Product, Access status: Open Access ,
      248  280
  • Some of the metrics are blocked by your 
    Item type:Publication, Access status: Open Access ,

    Progetto RETRACE-3D - centRal italy EarThquakes integRAted Crustal modEl - Modello Geologico

    (2021-03-29)
    RETRACE-3D, Working Group
    ;
    ; ; ;
    Three-dimensional geological model of the area of the central Apennines affected by the 2016-2018 seismic sequence. The model consists of stratigraphic surfaces (top or basal unconformity of units, or sequences of units, with homogeneous behavior) and main faults of the area. The stratigraphic surfaces are, from the oldest to the most recent: the top of pre-Upper Triassic units, the top of the intra-Triassic units, the top of Calcare Massiccio, the top of the Marne
      157  97
  • Some of the metrics are blocked by your 
    Item type:Publication, Access status: Open Access ,

    Progetto RETRACE-3D - centRal italy EarThquakes integRAted Crustal modEl - Rapporto Finale

    (2021-03-29)
    RETRACE-3D, Working Group
    ;
    ; ; ;
    Il progetto RETRACE-3D (centRal italy EarThquakes integRAted Crustal modEl) è volto alla caratterizzazione tridimensionale, geologica e sismotettonica, del volume di crosta terrestre che a partire dal 24 agosto 2016 è stato interessato dai terremoti di Amatrice, Visso e Norcia, e dalla relativa sequenza sismica. Il progetto è il risultato di una collaborazione tra il Dipartimento della Protezione Civile, l’Istituto Nazionale di Geofisica e Vulcanologia (INGV), il Consiglio Nazionale delle Ricerche che partecipa con l’Istituto di Geologia Ambientale e Geoingegneria (CNR-IGAG) e l’Istituto per il Rilevamento Elettromagnetico dell’Ambiente (CNR-IREA) e l’Istituto Superiore per la Protezione e la Ricerca Ambientale (ISPRA), con la collaborazione di Eni e Total, realtà private ma anch’esse parte del Servizio nazionale della Protezione Civile, che hanno messo a disposizione i propri dati di sottosuolo.
      171  128
  • Some of the metrics are blocked by your 
    Item type:Publication, Access status: Open Access ,

    The Making of the NEAM Tsunami Hazard Model 2018 (NEAMTHM18)

    The NEAM Tsunami Hazard Model 2018 (NEAMTHM18) is a probabilistic hazard model for tsunamis generated by earthquakes. It covers the coastlines of the North-eastern Atlantic, the Mediterranean, and connected seas (NEAM). NEAMTHM18 was designed as a three-phase project. The first two phases were dedicated to the model development and hazard calculations, following a formalized decision-making process based on a multiple-expert protocol. The third phase was dedicated to documentation and dissemination. The hazard assessment workflow was structured in Steps and Levels. There are four Steps: Step-1) probabilistic earthquake model; Step-2) tsunami generation and modeling in deep water; Step-3) shoaling and inundation; Step-4) hazard aggregation and uncertainty quantification. Each Step includes a different number of Levels. Level-0 always describes the input data; the other Levels describe the intermediate results needed to proceed from one Step to another. Alternative datasets and models were considered in the implementation. The epistemic hazard uncertainty was quantified through an ensemble modeling technique accounting for alternative models’ weights and yielding a distribution of hazard curves represented by the mean and various percentiles. Hazard curves were calculated at 2,343 Points of Interest (POI) distributed at an average spacing of ∼20 km. Precalculated probability maps for five maximum inundation heights (MIH) and hazard intensity maps for five average return periods (ARP) were produced from hazard curves. In the entire NEAM Region, MIHs of several meters are rare but not impossible. Considering a 2% probability of exceedance in 50 years (ARP≈2,475 years), the POIs with MIH >5 m are fewer than 1% and are all in the Mediterranean on Libya, Egypt, Cyprus, and Greece coasts. In the North-East Atlantic, POIs with MIH >3 m are on the coasts of Mauritania and Gulf of Cadiz. Overall, 30% of the POIs have MIH >1 m. NEAMTHM18 results and documentation are available through the TSUMAPS-NEAM project website (http://www.tsumaps-neam.eu/), featuring an interactive web mapper. Although the NEAMTHM18 cannot substitute in-depth analyses at local scales, it represents the first action to start local and more detailed hazard and risk assessments and contributes to designing evacuation maps for tsunami early warning.
      1499  280