Università Federico II, Napoli
4 results
Filters
Settings
The search returned 4 results
Now showing 1 - 4 of 4
- Some of the metrics are blocked by yourconsent settings
Item type:Publication, Access status: Open Access , Spatial and temporal distribution of vertical ground movements at Mt. Vesuvius in the period 1973-2009
(2013); ; ; ; Since the early ’70s vertical ground movements at Mount Vesuvius area have been investigated and monitored by the Osservatorio Vesuviano (Istituto Nazionale di Geofisica Vulcanologia - Osservatorio Vesuviano since 2001). This monitoring began with the installation of a high-precision leveling line in the region at medium-high elevations on the volcano. The deformation pattern and expected strain field assessment methods in the volcanic structure induced by inner sources has demanded in subsequent years the expansion of the leveling network up to cover the whole volcanic area, enclosing part of leveling lines of other institutions. As a result of this expansion, the Mt. Vesuvius Area Leveling Network (VALN) has today reached a length of about 270 km and consists of 359 benchmarks. It is configured in 21 circuits and is connected, westward, to the Campi Flegrei leveling network and, northward, to the Campania Plain leveling network. The data collected have been carefully re-analyzed for random and systematic errors and for error propagation along the leveling lines to identify the areas affected by significant ground movements. For each survey, the data were rigorously adjusted and vertical ground movements were evaluated by differentiating the heights calculated by the various measurements conducted by the Osservatorio Vesuviano from 1973 to 2009.312 579 - Some of the metrics are blocked by yourconsent settings
Item type:Publication, Access status: Open Access , High-resolution geophysical investigations in the central Apennines seismic belt (Italy): Results from the Campo Felice tectonic basin
The Campo Felice basin, in the central Apennines seismic belt (Italy), developed in the hangingwall of a 30 km-long system of NW-trending normal faults with Holocene paleoseismic activity and potential sources of M 6–7 earthquakes. We provide the first subsurface images of a key portion of the basin bounded by the Mt. Cefalone fault along two intersecting profiles trending NNE-SSW (CF-Dip, 1195 m-long) and WNW-ESE (CF-Strike, 1315-m long). We combined high-resolution depth-migrated reflection sections with P-wave velocity and electrical resistivity tomography models. CF-Dip profile displays a wedge-like syn-tectonic sedimentary sequence of alluvial and glacial deposits with Vp ∼ 2500–3000 m/s and resistivity > 500 Ωm in the hangingwall of Mt. Cefalone fault, overlying a high-Vp (>4000 m/s) limestone bedrock ∼ 300 m deep. The whole sequence displays reflectors truncated by the Mt. Cefalone fault zone and subsidiary antithetic faults. CF-Strike profile, tied to three 80–110 m-deep boreholes, shows a thick fluvio-lacustrine sequence with low-Vp (<2000 m/s) and low resistivity (<100 Ωm), and a bedrock that deepens to the southeast (>450 m). Single-station ambient noise measurements display Horizontal to Vertical Spectral Ratios with peaks at ∼1 Hz, decreasing to ∼0.8 Hz to the southeast in agreement with the bedrock deepening indicated by seismic profiling. According to our results, the Campo Felice basin is a deep asymmetric half-graben controlled by faulting whose activity likely started before the Middle Pleistocene. Our minimum displacement estimate accrued in the past 0.5 Ma by the Mt. Cefalone fault is in the range of ∼100–250 m.342 59 - Some of the metrics are blocked by yourconsent settings
Item type:Publication, Access status: Open Access , Active fault detection and characterization by ultrashallow seismic imaging: A case study from the 2016 Mw 6.5 central Italy earthquake
(2023-02-17); ; ; ; We present the first high-resolution ultrashallow seismic image of a normal fault segment that ruptured the surface during the Mw 6.5 2016 Norcia earthquake (central Italy). This is the only fault, in the entire activated 25 km-long system, cutting a thick succession of Quaternary deposits, with an associated 3-m-high cumulative scarp. A 190-m-long profile crossing the fault was acquired and analyzed combining reflection seismic, non-linear multiscale refraction P-wave tomography and multi-channel analysis of surface waves. The joint interpretation of the seismic reflection, P- and S-wave velocity images unravels a 100-m-thick sequence of sandy-gravel alluvial fans, disrupted by a main normal fault zone, named as Valle delle Fonti fault (Vf1), which branches upward into three splays. The eastern splay of Vf1 matches with the 2016 coseismic surface rupture. Near-surface truncated reflections and growth strata in the hanging wall of the western and intermediate splays attest to their activity in Late Pleistocene-Holocene times. We also detect an additional normal fault in the footwall of Vf1, probably inactive since the Late Pleistocene. Comparing the seismic images with the Poisson's coefficient model and with the results of a previous electrical resistivity tomography, we constrain the lithology and the hydraulic behavior of the uppermost 50 m of the fault. A steep, W-dipping zone with high-Vp, very high Poisson's coefficient and low resistivity correlates with the eastern splay of Valle delle Fonti fault and unravels a water-saturated region. These results suggest that the fault zone may act as a partial barrier for horizontal fluid flow. Our findings indicate that the active fault zone detected by seismic imaging is much wider than what previously estimated from surface geological analyses. In terms of surface faulting hazard, this study confirms the effectiveness of high-resolution seismic surveys in defining the geometry and physical properties of active fault zones.111 93 - Some of the metrics are blocked by yourconsent settings
Item type:Publication, Access status: Restricted , Engineering ground motion record selection in the ITalian ACcelerometric Archive
(2011-12); ; ; ; Iervolino, I.; Università Federico II, NapoliThis paper introduces REXELite, an internet version of REXEL, a software for automatic selection of ground motion suites for nonlinear dynamic analysis of structures. REXELite was developed with the aim of integrating an advanced earthquake records’ repository, such as the ITalianACcelerometricArchive (ITACA), with a tool to define seismic input for engineering seismic analysis according to international standards (with priority to Europe). In fact, REXELite allows to define target design spectra according either to Eurocode 8 or to the Italian building code, and to search ITACA for suitable sets of seven records (comprised of one or two horizontal ground motion components) matching such target spectra: on average, in a user-specified period range, and with the desired tolerance. The records in the set also have, individually and according to some criteria, the most similar spectral shape with respect to that of the code. Selection options include magnitude, source-to-site distance, soil conditions and, if desired, linear scaling of records to reduce further record-to-record variability of the selected suite.This paper introduces REXELite, an internet version of REXEL, a software for automatic selection of ground motion suites for nonlinear dynamic analysis of structures. REXELite was developed with the aim of integrating an advanced earthquake records’ repository, such as the ITalianACcelerometricArchive (ITACA), with a tool to define seismic input for engineering seismic analysis according to international standards (with priority to Europe). In fact, REXELite allows to define target design spectra according either to Eurocode 8 or to the Italian building code, and to search ITACA for suitable sets of seven records (comprised of one or two horizontal ground motion components) matching such target spectra: on average, in a user-specified period range, and with the desired tolerance. The records in the set also have, individually and according to some criteria, the most similar spectral shape with respect to that of the code. Selection options include magnitude, source-to-site distance, soil conditions and, if desired, linear scaling of records to reduce further record-to-record variability of the selected suite.145 18
