Skip to main content
The search returned 26 results
Now showing 1 - 10 of 26
  • Some of the metrics are blocked by your 
    Item type:Publication, Access status: Open Access ,

    An experiment on earthquake size distribution estimations reveals unexpected large epistemic uncertainty across methods

    (-UK: John Wiley & Sons, Inc. -[Oxford]: Blackwell Science., 2025-05-28) ; ; ; ;
    The earthquake size distribution is well described by the Gutenberg Richter Law, controlled by the b-value parameter. In recent decades, a great variety of methods for estimating the b-value have been proposed by the scientific community, despite the simplicity of this relationship. All these methods underlie the different views of individual modellers and, therefore, often generate inconsistent results. In thisstudy, we perform a seismological experiment in which we compare different, commonly adopted, methodologies, to estimate the completeness magnitude and the b-value, for seismicity in Central Italy. The intermethod differences are on average equal to 0.4 and 0.3, for Mc and b, respectively, but reach much larger values, especially during more intense seismic activity. Thisshowsthat epistemic uncertainty in the b-value plays a more crucial role than intramethod uncertainties, opening new perspectives in the interpretation of discrepant, single studies.
      11  38
  • Some of the metrics are blocked by your 
    Item type:Publication, Access status: Open Access ,

    b map evaluation and on-fault stress state for the Antakya 2023 earthquakes

    The analysis of on-fault seismicity can enlighten the current stress state on the fault itself. Its definition is relevant to individuate fault patches that have not released all the accumulated stress even after the occurrence of a high magnitude earthquake. We use the b value to characterize the stress state on the fault of the Antakya 2023 main events, being b inversely proportional to the stress. The small magnitude seismicity occurring on the maximum slip fault-patches does not allow the b value estimation. This represents a strong indication that the maximum slip zone released most of the stress previously accumulated. Conversely, the lowest b values are located at the bends of the faults and close to the nucleation zone suggesting that, there, still exists not released stress implying that it could be reactivated in the future.
      24  167
  • Some of the metrics are blocked by your 
    Item type:Publication, Access status: Open Access ,

    b value enlightens different rheological behaviour in Campi Flegrei caldera

    The Campi Flegrei caldera is one of the most dangerous volcanoes in the world and since 2005 it is in unrest. Here we evaluate the 3D tomography of the b value at the Campi Flegrei volcanic area revealing a very good correlation with the structure of the hydrothermal system involved in the bradiseismic phenomenon. More precisely, we observe the smallest b-values where we expect the higher stress/strain concentration, namely in the caprock, and for the deepest seismicity. Conversely, the largest b values are observed where the porosity of the medium allows the passage of the volcanic gases toward the surface. Values of b close to typical tectonic ones are observed where the presence of faulting structures is well documented.
      139  112
  • Some of the metrics are blocked by your 
    Item type:Publication, Access status: Open Access ,

    Evaluating the incompleteness magnitude using an unbiased estimate of the b value

    The evaluation of the b value of the Gutenberg–Richter (GR) law, for a sample composed of n earthquakes, presents a systematic positive bias δb which is proportional to 1/n . In this study, we show how to incorporate in δb the bias introduced by deviations from the GR law. More precisely we show that δb is proportional to the square of the variability coefficient CV, defined as the ratio between the standard deviation of the magnitude distribution and its mean value. When the magnitude distribution follows the GR law CV = 1 and this allows us to introduce a new graphical procedure, based on the dependence of b on n, which allows us to identify the incompleteness magnitude mc as the threshold magnitude leading to CV = 1. The method is tested on synthetic catalogues and it is applied to estimate mc in Southern California, Japan and New Zealand.
      32  107
  • Some of the metrics are blocked by your 
    Item type:Publication, Access status: Open Access ,

    Testing the Predictive Power of b Value for Italian Seismicity

    A very efficient method for estimating the completeness magnitude mc and the scaling parameter b of earthquake magnitude distribution has been thoroughly tested using synthetic seismic catalogues. Subsequently, the method was employed to assess the capability of the b-value in differentiating between foreshocks and aftershocks, confirming previous findings regarding the Amatrice-Norcia earthquake sequence. However, a blind algorithm reveals that the discriminative ability of the b-value necessitates a meticulous selection of the catalogue, thereby reducing the predictability of large events occurring subsequent to a prior major earthquake.
      33  110
  • Some of the metrics are blocked by your 
    Item type:Publication, Access status: Open Access ,

    Evaluation of the b Maps on the Faults of the Major (M > 7) South California Earthquakes

    We use the Godano et al. (2022, https://doi.org/10.1029/2021ea002205) method for evaluating the b maps of the faults associated with the largest earthquakes M ≥ 7.0 that occurred in California. The method allows an independent evaluation of the b parameter, avoiding the overlap of the cells and the omission of some earthquakes, while keeping all the available information in the catalog. We analyzed four large earthquakes: Landers, Hector Mine, Baja California, and Searles Valley. The maps obtained confirm that the b value can be considered as a strain meter and allow us to elucidate the presence of barriers, such as obstacles to the propagation of the fracture, on the fault of the analyzed earthquakes. A further estimated parameter is the time window during which aftershocks occur in the cell, Δt. This quantity is very useful for a better definition of the aftershock generation mechanism. It reveals where the stress is released in a short time interval and how the complexity of the faulting process controls the occurrence of aftershocks on the fault, and also the duration of the entire sequence.
      25  92
  • Some of the metrics are blocked by your 
    Item type:Publication, Access status: Open Access ,

    An Analytic Expression for the Volcanic Seismic Swarms Occurrence Rate. A Case Study of Some Volcanoes in the World

    Seismic swarms are defined as a group of earthquakes occurring very close in time and space but without any distinctively large event triggering their occurrence. Up to now no simple law has been found to describe the swarm occurrence rate. Here we find an expression able to fit the average occurrence rate on some volcanic areas. This expression exhibits some differences in respect to the classical Omori law. Namely the c parameter of the Omori law is equal to zero and the power law decay of the average occurrence rate of the earthquakes is followed by an exponential decaying regime. Both the results can be interpreted in term of fluid injection and/or movements. Indeed this is a more impulsive phenomenon compared to the occurrence of a large earthquake, with a duration compatible with a c = 0. The exponential decay following the power law one could be explained by a viscoelastic relaxation of the stress induced by the injection and/or movements of fluids in the earth crust.
      50  47
  • Some of the metrics are blocked by your 
    Item type:Publication, Access status: Open Access ,

    Nonlinear convective motion of the asthenosphere and the lithosphere melting: a model for the birth of a volcano

    The processes of heat transfer occurring between the Earth’s asthenosphere and lithosphere are responsible for partial melting of rocks, leading to the magma generation and its migration and segregation in the crust and, possibly, to volcanoes generation at the surface. Convection is the dominant mechanism regulating the heat transfer from the asthenosphere to the lithosphere, although many aspects of the whole process are not yet clear. Therefore, the knowledge of the physical processes leading to the melting of the lithospheric rocks has important consequences in understanding the interior Earth dynamics, the surface volcanic dynamics, and its related hazards. Rock melting occurs when the temperature gradient meets the rock solidus. Here, we propose a nonlinear convective 1D analytical model (representing an approximation of more 3D complex models). The steady-state solution of our equation is in good agreement with the estimated geotherms of the asthenosphere. A perturbative approach leads to a heat swelling at the boundary between asthenosphere and lithosphere able to determine its melting and the birth of a volcano.
      131  158
  • Some of the metrics are blocked by your 
    Item type:Publication, Access status: Open Access ,

    The Dependence on the Moho Depth of the b-Value of the Gutenberg–Richter Law

    We investigate the dependence of the Gutenberg–Richter b parameter on the crustal thickness quantified by the Moho depth, for nine different regional catalogs. We find that, for all the catalogs considered in our study, the b‐value is larger in areas presenting a thicker crust. This result appears in apparent contradiction with previous findings of a b decreasing with the focal depth. However, both the results are consistent with acoustic emission experiments, indicating a b‐value inversely proportion to the applied differential stress. Our results can be indeed interpreted as the signature of a larger stress concentration in areas presenting a thinner crust. This is compatible with the scenario where postseismic deformation plays a central role in stress concentration and in aftershock triggering.
      225  288
  • Some of the metrics are blocked by your 
    Item type:Publication, Access status: Open Access ,

    An Automated Method for Mapping Independent Spatial b Values

    We present an automated method for mapping the b values. The algorithm is very simple and presents three advantages: (a) it does not requires any tuning of the parameters like, for instance, a fixed cell size or a maximum radius of the cell; (b) it implies a more appropriate use of the catalog, by using almost all the events in the catalog used (with a tolerance of 1%) with no overlap; (c) it implies the full independence of the b values, thus allowing the statistical comparison of the results using standard tests. Although the resulting b values are comparable with those obtained by applying the other methods of common use in seismology, these latter (a) leave out many earthquakes from the analysis, with loose of useful information, (b) produce diffuse cells overlapping aiming at reaching many cells of the grid in order to get the correct number of events in each cell, and (c) results in correlated b values, which do not allow the test of significance for the differences in the b values. Finally, due to the independence from any ad hoc a-priori choice, our method is suitable for automatic and operator-free procedures.
      223  176