Skip to main content
The search returned 4 results
Now showing 1 - 4 of 4
  • Some of the metrics are blocked by your 
    Item type:Publication, Access status: Open Access ,

    COMPARING 1D/3D GROUND MOTION SIMULATIONS FOR EARTHQUAKES IN CENTRAL ITALY

    The seismic activity known as the Amatrice-Visso-Norcia seismic sequence began on August 24th, 2016, with the M6.2 earthquake in Amatrice, Italy. This sequence included eight additional earthquakes with magnitudes above 5.0, which caused significant damage to nearby villages. The largest and most significant event occurred on October 30th, 2016, with a magnitude of 6.5 in Norcia, central Apennines. In this study, we perform physics-based simulations and investigate the ground motion variability for Norcia and Amatrice earthquakes using the Pitarka et al. (2021a) and Akinci et al. (2023) simulation approaches, respectively. We generated broad-band ground-motion acceleration time histories (0-10Hz) for these two earthquakes using frequency-wavenumber Green’s functions (FK approach) and kinematic rupture models generated with the Graves and Pitarka (2016) technique. The FK Green’s functions (GF) were computed using the propagator matrix method of Zhu and Rivera (2002) and a 1D velocity model of Central Italy (CIA) (Hermann et al., 2011). The FK-based broad-band simulation method allows for fast and realistic generation of synthetic time histories, provided that appropriate GF repository and source rupture models are available. Finally, we analyzed the performance of our 1D simulation approach by comparing our synthetic ground motions with those computed with a regional 3D velocity model and the recorded ones. We found that the FK-based simulation approach and the 1D CIA velocity model produce ground motion that compares well with recorded data throughout the region in the modeled frequency range 0-10 Hz. Because this simulation technique is very fast and reliable, it can be used to produce ground motion maps soon after a major earthquake, and in computing scenario-based ground motion for seismic hazard assessment in Central Italy.
      62  181
  • Some of the metrics are blocked by your 
    Item type:Publication, Access status: Restricted ,

    Impact of the Earthquake Rupture on Ground-Motion Variability of the 24 August 2016 M w 6.2 Amatrice, Italy, Earthquake

    ([Stanford Calif.]: Seismological Society of America, [1911-, 2024-07-26) ; ; ; ;
    The devastating 24 August 2016 M w 6.2 earthquake that struck Amatrice, Italy, marked the beginning of a prolonged seismic sequence dominated by three subsequent M w ≥ 6.0 events in the central Apennines region. The earthquake destroyed Amatrice's historic center, claiming the lives of 299 individuals and causing widespread damage in the neighboring villages. The severity of the ground shaking, with a recorded maximum acceleration of 850 cm= s 2 on the east-west component at the Amatrice station, was far greater than the predicted acceleration based on the Italian ground-motion model (GMM). As pointed out by several investigations, the observed ground-motion amplitude and its spatial variability during the earthquake can be linked to specific rupture characteristics, including slip distribution and rupture directivity effects revealed by the observed data (Tinti et al., 2016; Pischiutta et al., 2021). In this study, we conducted physics-based 3D numerical simulations of ground motion for the Amatrice earthquake for frequencies up to 3 Hz. We employed a series of kinematic rupture models and a well-constrained local 3D velocity model incorporating surface topography. The kinematic rupture realizations were generated using multiscale hybrid and fully stochastic models, following the technique proposed by Graves and Pitarka (2016). We focused on assessing the sensitivity of near-fault ground-motion amplitudes to earthquake rupture characteristics, in particular, the spatial slip pattern. To evaluate the quality of our simulations, we employed goodness-of-fit measurements performed in comparisons of simulated and recorded ground motions. The simulated ground motions compare well with the recorded data and predictions from GMMs for Italy, ITA18 (Lanzano et al., 2019). However, we found that the simulated interevent ground-motion variability (randomness in the source process) of peak ground velocity, σ (PGV) is higher than the constant σ (PGV) predicted by conventional GMMs. Our simulations using several rupture scenarios demonstrate that the near-fault groundmotion amplification pattern is directly related to the slip distribution pattern. KEY POINTS • The near-fault ground-motion amplification pattern is related to the size and distribution of the slip. • The rupture directivity is controlled by location of the rupture initiation relative to the large slip patches. • Peak ground velocity interevent variability is distance dependent and higher at shorter distances than that of constant ground-motion models.
      12
  • Some of the metrics are blocked by your 
    Item type:Publication, Access status: Restricted ,

    Broadband Near-Fault Ground-Motion Simulations Using a Modified f-k Method in Central Italy

    ([Stanford Calif.]: Seismological Society of America, [1911-, 2026) ; ; ;
    Cuius, Arianna
    ;
    In this study, we simulate ground motions for three major earthquakes that occurred in Central Italy: the 2009 M w 6.3 L'Aquila earthquake and the two largest events of the 2016 Amatrice-Visso-Norcia sequence, the M w 6.2 Amatrice and M w 6.5 Norcia earthquakes. These events caused widespread damage, intense ground shaking, and casualties, making them key cases for evaluating and improving ground-motion modeling techniques, especially given the high-quality recordings available from near-source stations. We use the frequency-wavenumber (f-k) method to generate broadband synthetic ground motions ≤ 7 Hz. This approach balances computational efficiency with physical accuracy, making it well suited for regional-scale applications. Green's functions are computed from the Central Italian Apennines 1D layered velocity model (Herrmann et al., 2011), and kinematic rupture models are generated using the methodology of Graves and Pitarka (2016; hereafter, GP16), implemented into the f-k framework. Site response is incorporated using frequency-dependent nonlinear amplification factors (Borcherdt, 1994). We evaluate the simulations through a detailed comparison with observed ground motions using RotD50 spectral acceleration and a goodness-of-fit analysis. In addition to simulations at recorded stations, we compute ground motions over a dense grid of virtual sites to assess spatial variability and source-related effects such as rupture directivity and regional amplification. Results are benchmarked against predictions from the empirical ground-motion model ITA18 (Lanzano et al., 2019). Our findings demonstrate that the f-k method can reproduce key features of observed ground motion with good agreement, capturing both near-fault effects and broader regional trends. This study demonstrates that the f-k approach offers a computationally efficient and physically robust alternative for deterministic groundmotion simulation, bridging empirical models and 3D simulations for practical use in hazard scenarios and urgent computing workflows. KEY POINTS • The frequency-wavenumber (f-k) method with 1D models efficiently simulates broadband ground motion ≤7 Hz. • Hybrid rupture models capture rupture directivity effects observed in the L'Aquila and Amatrice events. • Simulations show satisfactory agreement with recorded data and enable rapid regional seismic hazard assessment.
      8
  • Some of the metrics are blocked by your 
    Item type:Publication, Access status: Open Access ,

    Deterministic 3D Ground-Motion Simulations (0–5 Hz) and Surface Topography Effects of the 30 October 2016 Mw 6.5 Norcia, Italy, Earthquake

    TheMw6.5 Norcia, Italy, earthquake occurred on 30 October 2016 and caused extensive damage to buildings in the epicentral area. The earthquake was recorded by a network of strong-motion stations, including 14 stations located within a 5 km distance from the two causative faults. We used a numerical approach for generating seismic waves from two-hybrid deterministic and stochastic kinematic fault rupture models propagating through a 3D Earth model derived from seismic tomography and local geology. The broadband simulations were performed in the 0–5 Hz frequency range using a physics-based deterministic approach modeling the earthquake rupture and elastic wave propagation. We used SW4, a finite-difference code that uses a conforming curvilinear mesh, designed to model surface topography with high numerical accuracy. The simulations reproduce the amplitude and duration of observed near-fault ground motions. Our results also suggest that due to the local fault-slip pattern and upward rupture directivity, the spatial pattern of the horizontal near-fault ground motion generated during the earthquake was complex and characterized by several local minima and maxima. Some of these local ground-motion maxima in the near-fault region were not observed because of the sparse station coverage. The simulated peak ground velocity (PGV) is higher than both the recorded PGV and predicted PGV based on empirical models for several areas located above the fault planes. Ground motions calculated with and without surface topography indicate that, on average, the local topography amplifies the ground-motion velocity by30%. There is a correlation between the PGV and local topography, with the PGV being higher at hilltops. In contrast, spatial variations of simulated PGA do not correlate with the surface topography. Simulated ground motions are important for seismic hazard and engineering assessments for areas that lack seismic station coverage and historicalrecordings from large damaging earthquakes.
      459  163