Skip to main content
The search returned 21 results
Now showing 1 - 10 of 21
  • Some of the metrics are blocked by your 
    Item type:Publication, Access status: Restricted ,

    Monitoring crater-wall collapse at active volcanoes: a study of the 12 January 2013 event at Stromboli

    Crater-wall collapses are fairly frequent at active volcanoes and they are normally studied through the analysis of their deposits. In this paper, we present an analysis of the 12 January 2013 crater-wall collapse occurring at Stromboli vol- cano, investigated by means of a monitoring network com- prising visible and infrared webcams and a Ground-Based Interferometric Synthetic Aperture Radar. The network re- vealed the triggering mechanisms of the collapse, which are comparable to the events that heralded the previous effusive eruptions in 1985, 2002, 2007 and 2014. The collapse oc- curred during a period of inflation of the summit cone and was preceded by increasing explosive activity and the enlarge- ment of the crater. Weakness of the crater wall, increasing magmastatic pressure within the upper conduit induced by ascending magma and mechanical erosion caused by vent opening at the base of the crater wall and by lava fingering, are considered responsible for triggering the collapse on 12 January 2013 at Stromboli. We suggest that the combination of these factors might be a general mechanism to generate crater-wall collapse at active volcanoes.
      480  208
  • Some of the metrics are blocked by your 
    Item type:Publication, Access status: Restricted ,

    Movements of the Sciara del Fuoco

    The Sciara del Fuoco (SdF) landslides that occurred at the end of December 2002 prompted researchers to install geodetic networks to monitor deformations related to potential new slope failures. With this aim, an integrated multiparametric monitoring system was designed and deployed. In particular, this complex monitoring system is composed of four single systems: an electronic distance measurement network, installed immediately after the landslide events, a realtime GPS network, a ground-based interferometric linear synthetic aperture radar (GB-InSAR), and an automated topographic monitoring system (named Theodolite Robotic Observatory of Stromboli, or THEODOROS); the three last systems provided a continuous monitoring of selected points or sectors of the SdF. Data acquired from different systems have been jointly analyzed to reach a better understanding of the SdF dynamics. Displacement data obtained from the topographic systems are compared with those obtained from GB-InSAR, and the results of the comparison are analyzed and discussed. Furthermore, in this chapter, an example of a warning system that can detect slope instability precursors on the SdF based on a statistical analysis of the data collected by the THEODOROS system is reported.
      156  19
  • Some of the metrics are blocked by your 
    Item type:Publication, Access status: Open Access ,

    Assessing flank instability of Stromboli volcano (Italy) by reappraising the 30 December 2002 tsunamigenic landslides

    Bearing in mind the destructive potential of tsunamis induced by volcanic landslides, the tsunamigenic event occurring at Stromboli volcano in Italy on 30 December 2002 has been reexamined here, by means of visible images and slope stability analysis. This was one of the few examples in the world of a flank collapse occurring at a volcano that was directly observed. We present the results of stability analyses, together with a sequence of photos collected from a helicopter a few minutes before the collapse. The result of this study is that the sequence of landslides triggering the 2002 Stromboli tsunami can be defined as the final stage of a lateral magma intrusion that exerted a high thrust at high altitude, destabilizing the entire slope. This study allows a more complete understanding of the event that took place on Stromboli on 30 December 2002. Furthermore, the approach used here, if appropriately modified, can be used in other contexts, contributing to the understanding of the condition that leads to tsunamigenic landslides
      473  80
  • Some of the metrics are blocked by your 
    Item type:Publication, Access status: Open Access ,

    Geomorphology of the upper sector of the Roncovetro active landslide (Emilia-Romagna Region, Italy)

    We present the geomorphological map of the upper sector of the Roncovetro active landslide (Enza Valley, Emilia-Romagna, Italy). The 1:1500 scale map provides an accurate picture of the landslide in October 2014. The map is mainly based on the data collected during an airborne LiDAR survey. The capability of LiDAR to ‘penetrate’ the vegetation cover makes these data the most complete and accurate topographic dataset of this landslide. The map shows that the upper sector of the Roncovetro landslide consists of gravity- and water runoff-related forms. Gravitational features are linked to sliding and flowing movements that characterize the short- and long-term behaviour of the landslide. By comparing the 2014 LiDAR-Digital Elevation Model (DEM) with the 1973 DEM provided by the Emilia-Romagna Region, we calculated that 6.2 ± 0.8 × 105 m3 of material has moved from the top of the Roncovetro landslide in about 40 years.
      310  112
  • Some of the metrics are blocked by your 
    Item type:Publication, Access status: Open Access ,

    The 2014 Effusive Eruption at Stromboli: New Insights from In Situ and Remote-Sensing Measurements

    In situ and remote-sensing measurements have been used to characterize the run-up phase and the phenomena that occurred during the August–November 2014 flank eruption at Stromboli. Data comprise videos recorded by the visible and infrared camera network, ground displacement recorded by the permanent-sited Ku-band, Ground-Based Interferometric Synthetic Aperture Radar (GBInSAR) device, seismic signals (band 0.02–10 Hz), and high-resolution Digital Elevation Models (DEMs) reconstructed based on Light Detection and Ranging (LiDAR) data and tri-stereo PLEIADES-1 imagery. This work highlights the importance of considering data from in situ sensors and remote-sensing platforms in monitoring active volcanoes. Comparison of data from live-cams, tremor amplitude, localization of Very-Long-Period (VLP) source and amplitude of explosion quakes, and ground displacements recorded by GBInSAR in the crater terrace provide information about the eruptive activity, nowcasting the shift in eruptive style of explosive to effusive. At the same time, the landslide activity during the run-up and onset phases could be forecasted and tracked using the integration of data from the GBInSAR and the seismic landslide index. Finally, the use of airborne and space-borne DEMs permitted the detection of topographic changes induced by the eruptive activity, allowing for the estimation of a total volume of 3.07 ± 0.37 × 106 m3 of the 2014 lava flow field emplaced on the steep Sciara del Fuoco slope.
      749  78
  • Some of the metrics are blocked by your 
    Item type:Publication, Access status: Restricted ,

    From hot rocks to glowing avalanches: Numerical modelling of gravity-induced pyroclastic density currents and hazard maps at the Stromboli volcano (Italy)

    Gravity-induced pyroclastic density currents (PDCs) can be produced by the collapse of volcanic crater rims or due to the gravitational instability of materials deposited in proximal areas during explosive activity. These types of PDCs, which are also known as “glowing avalanches”, have been directly observed, and their deposits have been widely identified on the flanks of several volcanoes that are fed by mafic to intermediatemagmas. In this research, the suitability of landslide numerical models for simulating gravity-induced PDCs to provide hazard assessmentswas tested. This work also presents the results of a back-analysis of three events that occurred in 1906, 1930 and 1944 at the Stromboli volcano by applying a depth-averaged 3Dnumerical code named DAN-3D. The model assumes a frictional internal rheology and a variable basal rheology (i.e., frictional, Voellmy and plastic). The numerical modelling was able to reproduce the gravity-induced PDCs' extension and deposit thicknesses to an order ofmagnitude of that reported in the literature. The best resultswhen comparedwith field datawere obtained using a Voellmymodelwith a frictional coefficient of f=0.19 and a turbulence parameter ξ=1000 m s−1. The results highlight the suitability of this numerical code,which is generally used for landslides, to reproduce the destructive potential of these events in volcanic environments and to obtain information on hazards connected with explosive-related, mass-wasting phenomena in Stromboli Island and at volcanic systems characterized by similar phenomena.
      435  4
  • Some of the metrics are blocked by your 
    Item type:Publication, Access status: Open Access ,

    Changes in the Eruptive Style of Stromboli Volcano before the 2019 Paroxysmal Phase Discovered through SOM Clustering of Seismo-Acoustic Features Compared with Camera Images and GBInSAR Data

    Two paroxysmal explosions occurred at Stromboli on July 3 and August 28, 2019, the first of which caused the death of a young tourist. After the first paroxysm an effusive activity began from the summit vents and affected the NW flank of the island for the entire period between the two paroxysms. We carried out an unsupervised analysis of seismic and infrasonic data of Strombolian explosions over 10 months (15 November 2018–15 September 2019) using a Self- Organizing Map (SOM) neural network to recognize changes in the eruptive patterns of Stromboli that preceded the paroxysms. We used a dataset of 14,289 events. The SOM analysis identified three main clusters that showed different occurrences with time indicating a clear change in Stromboli’s eruptive style before the paroxysm of 3 July 2019. We compared the main clusters with the recordings of the fixed monitoring cameras and with the Ground-Based Interferometric Synthetic Aperture Radar measurements, and found that the clusters are associated with different types of Strombolian explosions and different deformation patterns of the summit area. Our findings provide new insights into Strombolian eruptive mechanisms and new perspectives to improve the monitoring of Stromboli and other open conduit volcanoes.
      1161  197
  • Some of the metrics are blocked by your 
    Item type:Publication, Access status: Open Access ,

    Towards a National-Scale Dataset of Geotechnical and Hydrological Soil Parameters for Shallow Landslide Modeling

    One of the main constraints in assessing shallow landslide hazards through physically based models is the need to characterize the geotechnical parameters of the involved materials. Indeed, the quantity and quality of input data are closely related to the reliability of the results of every model used, therefore data acquisition is a critical and time-consuming step in every research activity. In this perspective, we reviewed all official certificates of tests performed through 30 years at the Geotechnics Laboratory of the Earth Science Department (University of Firenze, Firenze, Italy), compiling a dataset in which 380 points are accurately geolocated and provide information about one or more geotechnical parameters used in slope stability modeling. All tests performed in the past (in the framework of previous research programs, agreements of cooperation, or to support didactic activities) were gathered, homogenized, digitalized, and geotagged. The dataset is based on both on-site tests and laboratory tests, it accounts for 40 attributes, among which 13 are descriptive (e.g., lithology or location) and 27 may be of direct interest in slope stability modeling as input parameters. The dataset is made openly available and can be useful for scientists or practitioners committed to landslide modeling.
      192  139
  • Some of the metrics are blocked by your 
    Item type:Publication, Access status: Open Access ,

    A method for locating rockfall impacts using signals recorded by a microseismic network

    Background Rockfall events are one of the most dangerous phenomena that often cause several damages both to people and facilities. During recent years, the scientific community focused the attention at evaluating the effectiveness of seismological methods in monitoring these phenomena. In this work, we present a quick and practical method to locate the rebounds of some man-induced boulders falls from a landslides crown located in the Northern Apennines (Central Italy). The reconstruction of the trajectories was obtained by means of back analysis performed through a Matlab code that takes into account both the DEM (Digital Elevation Model) of the ground, the geotechnical-geophysical characteristics of the slope and the arrival times of the seismic signals generated by the rock impacts on the ground. Results The localization results have been compared with GPS coordinates of the points and videos footage acquired during the simulations, in order to assess the reliability of the method. In most cases, the retrieved impact points match with the real trajectories, showing a high reliability. Furthermore, four different cases have been identified as a function of the geomechanical, geophysical and morphological conditions. Due to the latter ones, in some case it was necessary to assume different values for the propagation velocity of the elastic waves in the ground, here assumed to be isotropic and homogeneous. Conclusions This work aims at evaluating the effectiveness of a quick and practical method to locate rockfall events using a small-aperture seismic network. The obtained results indicate that the technique can provide quantitative information about the area most prone to impact of detached blocks. The method still presents some uncertainty, but reducing some of the approximations (e.g. by better constraining the velocity model), it could lead to prompt and more accurate results, easily applicable to hazard estimates.
      543  172
  • Some of the metrics are blocked by your 
    Item type:Publication, Access status: Open Access ,

    Catching Geomorphological Response to Volcanic Activity on Steep Slope Volcanoes Using Multi-Platform Remote Sensing

    The geomorphological evolution of the volcanic Island of Stromboli (Italy) between July 2010 and June 2019 has been reconstructed by using multi-temporal, multi-platform remote sensing data. Digital elevation models (DEMs) from PLÉIADES-1 tri-stereo images and from Light Detection and Ranging (LiDAR) acquisitions allowed for topographic changes estimation. Data were comprised of high-spatial-resolution (QUICKBIRD) and moderate spatial resolution (SENTINEL-2) satellite images that allowed for the mapping of areas that were affected by major lithological and morphological changes. PLÉIADES tri-stereo and LiDAR DEMs have been quantitatively and qualitatively compared and, although there are artefacts in the smaller structures (e.g., ridges and valleys), there is still a clear consistency between the two DEMs for the larger structures (as the main valleys and ridges). The period between July 2010 and May 2012 showed only minor changes consisting of volcanoclastic sedimentation and some overflows outside the crater. Otherwise, between May 2012 and May 2017, large topographic changes occurred that were related to the emplacement of the 2014 lava flow in the NE part of the Sciara del Fuoco and to the accumulation of a volcaniclastic wedge in the central part of the Sciara del Fuoco. Between 2017 and 2019, minor changes were again detected due to small accumulation next to the crater terrace and the erosion in lower Sciara del Fuoco.
      345  108