Custodio, Susana
Preferred name
Custodio, Susana
ORCID
9 results
Filters
Settings
The search returned 9 results
Now showing 1 - 9 of 9
- Some of the metrics are blocked by yourconsent settings
Item type:Publication, Access status: Open Access , The European Fault-Source Model 2020 (EFSM20): geologic input data for the European Seismic Hazard Model 2020
(2024-11-19); ; ; ; Pires Vilanova, Susana<jats:p>Abstract. Earthquake hazard analyses rely on seismogenic source models. These are designed in various fashions, such as point sources or area sources, but the most effective is the three-dimensional representation of geological faults. We here refer to such models as fault sources. This study presents the European Fault-Source Model 2020 (EFSM20), which was one of the primary input datasets of the recently released European Seismic Hazard Model 2020. The EFSM20 compilation was entirely based on reusable data from existing active fault regional compilations that were first blended and harmonized and then augmented by a set of derived parameters. These additional parameters were devised to enable users to formulate earthquake rate forecasts based on a seismic-moment balancing approach. EFSM20 considers two main categories of seismogenic faults: crustal faults and subduction systems, which include the subduction interface and intraslab faults. The compiled dataset covers an area from the Mid-Atlantic Ridge to the Caucasus and from northern Africa to Iceland. It includes 1248 crustal faults spanning a total length of ∼95 100 km and four subduction systems, namely the Gibraltar, Calabrian, Hellenic, and Cyprus arcs, for a total length of ∼2120 km. The model focuses on an area encompassing a buffer of 300 km around all European countries (except for Overseas Countries and Territories) and a maximum of 300 km depth for the subducting slabs. All the parameters required to develop a seismic source model for earthquake hazard analysis were determined for crustal faults and subduction systems. A statistical distribution of relevant seismotectonic parameters, such as faulting mechanisms, slip rates, moment rates, and prospective maximum magnitudes, is presented and discussed to address unsettled points in view of future updates and improvements. The dataset, identified by the DOI https://doi.org/10.13127/efsm20 (Basili et al., 2022), is distributed as machine-readable files using open standards (Open Geospatial Consortium). </jats:p>14 70 - Some of the metrics are blocked by yourconsent settings
Item type:Publication, Access status: Open Access , On the external forcing of global eruptive activity in the past 300 years
(2023-10-19); ; ; ; The decryption of the temporal sequence of volcanic eruptions is a key step in better anticipating future events. Volcanic activity is the result of a complex interaction between internal and external processes, with time scales spanning multiple orders of magnitude. We review periodicities that have been detected or correlated with volcanic eruptions/phenomena and interpreted as resulting from external forces. Taking a global perspective and longer time scales than a few years, we approach this interaction by analyzing three time series using singular spectral analysis: the global number of volcanic eruptions (NVE) between 1700 and 2022, the number of sunspots (ISSN), a proxy for solar activity, the polar motion (PM) and length of day (lod), two proxies for gravitational force. Several pseudo-periodicities are common to NVE and ISSN, in addition to the 11-year Schwabe cycle that has been reported in previous work, but NVE shares even more periodicities with PM. These quasi-periodic components range from ~5 to ~130 years. We interpret our analytical results in light of the Laplace's paradigm and propose that, similarly to the movement of Earth's rotation axis, global eruptive activity is modulated by commensurable orbital moments of the Jovian planets, whose influence is also detected in solar activity.186 191 - Some of the metrics are blocked by yourconsent settings
Item type:Product, Access status: Open Access , 53 383 - Some of the metrics are blocked by yourconsent settings
Item type:Publication, Access status: Restricted , Tides, earthquakes, and volcanic eruptions
(Elsevier, 2022-09-13); ; ; ; The Earth is a dynamic planet, where earthquakes and volcanoes are among some of its most outstanding expressions. Just like our planet as a whole is subject to lunisolar gravitational tides, seismic and volcanic activity are also influenced by the relative motion of the Sun and Moon. This tidal influence takes different forms, spanning different spatial and temporal scales, from quasiperiodic patterns with semidiurnal to multiannual periods to the triggering of earthquakes and volcanic eruptions. Tidal stresses have been primarily evoked as driving forces, although they are 3–5 orders of magnitude smaller than tectonic stresses, which makes cause-effect relationships elusive. This chapter reviews the different observations of tidal influence in geophysical and geochemical data acquired in tectonic and volcanic settings, as well as the methods that have been developed to detect it. Using case studies, we provide some insights on the sensitivity of geological systems to tidal stresses.143 1 - Some of the metrics are blocked by yourconsent settings
Item type:Publication, Access status: Open Access , Coordinated and Interoperable Seismological Data and Product Services in Europe: the EPOS Thematic Core Service for Seismology
(2022-04-29); ; ; ; In this article we describe EPOS Seismology, the Thematic Core Service consortium for the seismology domain within the European Plate Observing System infrastructure. EPOS Seismology was developed alongside the build-up of EPOS during the last decade, in close collaboration between the existing pan-European seismological initiatives ORFEUS (Observatories and Research Facilities for European Seismology), EMSC (Euro-Mediterranean Seismological Center) and EFEHR (European Facilities for Earthquake Hazard and Risk) and their respective communities. It provides on one hand a governance framework that allows a well-coordinated interaction of the seismological community services with EPOS and its bodies, and on the other hand it strengthens the coordination among the already existing seismological initiatives with regard to data, products and service provisioning and further development. Within the EPOS Delivery Framework, ORFEUS, EMSC and EFEHR provide a wide range of services that allow open access to a vast amount of seismological data and products, following and implementing the FAIR principles and supporting open science. Services include access to raw seismic waveforms of thousands of stations together with relevant station and data quality information, parametric earthquake information of recent and historical earthquakes together with advanced event-specific products like moment tensors or source models and further ancillary services, and comprehensive seismic hazard and risk information, covering latest European scale models and their underlying data. The services continue to be available on the well-established domain-specific platforms and websites, and are also consecutively integrated with the interoperable central EPOS data infrastructure. EPOS Seismology and its participating organizations provide a consistent framework for the future development of these services and their operation as EPOS services, closely coordinated also with other international seismological initiatives, and is well set to represent the European seismological research infrastructures and their stakeholders within EPOS.572 124 - Some of the metrics are blocked by yourconsent settings
Item type:Publication, Access status: Restricted , Preface to the Focus Section on European Seismic Networks and Associated Services and Products
Skip Nav Destination RESEARCH ARTICLE| APRIL 07, 2021 Preface to the Focus Section on European Seismic Networks and Associated Services and Products Carlo Cauzzi; Susana Custódio; Christos P. Evangelidis; Giovanni Lanzano; Lucia Luzi; Lars Ottemöller; Helle Pedersen; Reinoud Sleeman Seismological Research Letters (2021) 92 (3): 1483–1490. https://doi.org/10.1785/0220210055 Article history Standard View PDF LinkPDF Cite Share Icon Share Tools Icon Tools Observational seismology in Europe is firmly rooted in national and regional observatories in charge of managing more than 100 permanent seismic networks and more than 200 past and present temporary deployments. Primarily driven by governmental mandates to detect local seismicity and provide earthquake information to civil protection agencies and the general public, this monitoring effort also results in a tremendous amount of high‐quality data—more than 12,000 stations presently contribute to the European Integrated Data Archive (EIDA)—which is made available to scientists and practitioners. This lively community of seismic data providers and users is at the core of the success of this focus section: 30 groups responded enthusiastically to our call for papers, providing high‐quality contributions that describe the state of the art in observational seismology in the greater European region, addressing all components of the life cycle of seismic data, from station design to open dissemination of data and seismological products (Amato et al., 2021; Bono et al., 2021; Bragato et al., 2021; Büyükakpınar et al., 2021; Cambaz et al., 2021; Carrilho et al., 2021; Danecek et al., 2021; Evangelidis et al., 2021; Galea et al., 2021; Heit et al., 2021; Lanzano et al., 2021; Lenhardt et al., 2021; Lund et al., 2021; Mărmureanu et al., 2021; Margheriti et al., 2021; Masson et al., 2021; Mader and Ritter, 2021; Ottemöller et al., 2021; Quinteros, Strollo,et al., 2021; Quinteros, Carter, et al., 2021; Rudzinski et al, 2021; Péquegnat et al., 2021; Schweitzer et al., 2021; Senturk et al., 2021; Shahvar et al., 2021; Spallarossa et al., 2021; Stammler et al., 2021; Strollo et al., 2021; Veikkolainen et al., 2021).166 207 - Some of the metrics are blocked by yourconsent settings
Item type:Publication, Access status: Open Access , Gravitational Potential Energy in Iberia: A Driver of Active Deformation in High-Topography Regions
(2018-10-17); ; ; ; In this study, we present a new estimation of the gravitational potential energy (GPE) in Iberia and use numerical modeling to evaluate its relative contribution to the present‐day stress field and deformation. We also present an improved (larger time span and denser coverage) compilation of Global Navigation Satellite System velocities, which we use to compute the strain rate field of Iberia. We take advantage of recent neotectonic modeling developed for Iberia and northwest Africa to study the isolated dynamic contribution of GPE‐related stresses. We present two models—one including only the stress generated by GPE and another reproducing the net stress field—and compare their predictions with the most up‐to‐date compilations of stress indicators, hypocenter clusters, and geodetic strain rates. The main effect of GPE is to induce second‐order spatial variations in the stress field. GPE appears to play an important role in high‐topography regions, where it explains deviatoric stress patterns mainly associated with extensional regimes. In north Iberia, especially in the Pyrenees and Cantabria, GPE causes an extensional regime over the highest peaks. In the Iberian Chain and eastern Betics, GPE is in agreement with the observed extensional deformation. Normal focal mechanisms of shallow earthquake clusters appear to be related with GPE maxima and GPE‐induced extensional regimes. Wavelength analysis suggests that both GPE and the long‐wavelength topography of intraplate Iberia record the plate boundary forces that acted in Iberia during the Alpine orogeny at Eocene to lower Miocene times.322 101 - Some of the metrics are blocked by yourconsent settings
Item type:Product, Access status: Open Access , 71 112 - Some of the metrics are blocked by yourconsent settings
Item type:Publication, Access status: Restricted , Moment Tensor Resolution: Case Study of the Irpinia Seismic Network, Southern Italy
We present an analysis of the reliability of focal mechanisms obtained through moment tensor inversion at the Irpinia Seismic Network, southern Italy. Our analysis is based on the methods proposed by Zahradník and Custódio (2012) and Sokos and Zahradník (2013). We present two different studies: (1) we compute maps of theoretical focal mechanism resolution for the Irpinia region and (2) we study the reliability of the solutions obtained from waveform inversion of five regional earthquakes. Theoretically, we find that when data error is the dominant source of error, focal mechanism resolution is better close to the spots of higher station density rather than at the center of the network. Using real data, we were able to successfully study four of the five regional events, in spite of the large source–station distances (up to ∼280 km) and significant azimuthal gaps (>319°). We used variance reduction, double‐couple percentage, signal‐to‐noise ratio, condition number, and focal mechanism variability index to assess the quality of the solutions. Our quality assessment is validated by comparison with independent focal mechanism solutions.86 1
