Neres, Marta
Preferred name
Neres, Marta
4 results
Filters
Settings
The search returned 4 results
Now showing 1 - 4 of 4
- Some of the metrics are blocked by yourconsent settings
Item type:Publication, Access status: Open Access , The European Fault-Source Model 2020 (EFSM20): geologic input data for the European Seismic Hazard Model 2020
(2024-11-19); ; ; ; Pires Vilanova, Susana<jats:p>Abstract. Earthquake hazard analyses rely on seismogenic source models. These are designed in various fashions, such as point sources or area sources, but the most effective is the three-dimensional representation of geological faults. We here refer to such models as fault sources. This study presents the European Fault-Source Model 2020 (EFSM20), which was one of the primary input datasets of the recently released European Seismic Hazard Model 2020. The EFSM20 compilation was entirely based on reusable data from existing active fault regional compilations that were first blended and harmonized and then augmented by a set of derived parameters. These additional parameters were devised to enable users to formulate earthquake rate forecasts based on a seismic-moment balancing approach. EFSM20 considers two main categories of seismogenic faults: crustal faults and subduction systems, which include the subduction interface and intraslab faults. The compiled dataset covers an area from the Mid-Atlantic Ridge to the Caucasus and from northern Africa to Iceland. It includes 1248 crustal faults spanning a total length of ∼95 100 km and four subduction systems, namely the Gibraltar, Calabrian, Hellenic, and Cyprus arcs, for a total length of ∼2120 km. The model focuses on an area encompassing a buffer of 300 km around all European countries (except for Overseas Countries and Territories) and a maximum of 300 km depth for the subducting slabs. All the parameters required to develop a seismic source model for earthquake hazard analysis were determined for crustal faults and subduction systems. A statistical distribution of relevant seismotectonic parameters, such as faulting mechanisms, slip rates, moment rates, and prospective maximum magnitudes, is presented and discussed to address unsettled points in view of future updates and improvements. The dataset, identified by the DOI https://doi.org/10.13127/efsm20 (Basili et al., 2022), is distributed as machine-readable files using open standards (Open Geospatial Consortium). </jats:p>14 70 - Some of the metrics are blocked by yourconsent settings
Item type:Product, Access status: Open Access , 53 383 - Some of the metrics are blocked by yourconsent settings
Item type:Publication, Access status: Open Access , A sanity check for earthquake recurrence models used in PSHA of slow deforming regions: the case of SW Iberia
Probabilistic seismic hazard assessment (PSHA), despite its deep criticism, is still the most common tool used to decide on the acceptable seismic risk and corresponding mitigation measures.We propose two consistency tests to address the variability of earthquake generation models found in PSHA studies: (i) one rule-of-thumb test where the seismic moment release from the model is converted to an average slip on a typical fault and compared with known plate kinematics or GNSS deformation field and (ii) a test where using a neotectonic model the computed deformation is converted into seismic moment release and to a synthetic earthquake catalogue. We apply these tests to W and SW Iberia slowly deforming region, where two earthquake source areas are investigated: (1) the Lower Tagus Valley, one of the largest seismic risk zones of Portugal; and (2) the offshore SW Iberia area, considered to be the source for the 1 November 1755 event (M 8.7). Results show that some of the earthquake source models should be considered suspicious, given their high/low moment release when compared to the expected values from GNSS observations or neotectonic modelling. This analysis allowed for a downgrade of the weight of poorly compliant models in the PSHA analysis, and thus for a more realistic hazard assessment, and can be integrated in other studies of similar settings.47 183 - Some of the metrics are blocked by yourconsent settings
Item type:Publication, Access status: Open Access , Gravitational Potential Energy in Iberia: A Driver of Active Deformation in High-Topography Regions
(2018-10-17); ; ; ; In this study, we present a new estimation of the gravitational potential energy (GPE) in Iberia and use numerical modeling to evaluate its relative contribution to the present‐day stress field and deformation. We also present an improved (larger time span and denser coverage) compilation of Global Navigation Satellite System velocities, which we use to compute the strain rate field of Iberia. We take advantage of recent neotectonic modeling developed for Iberia and northwest Africa to study the isolated dynamic contribution of GPE‐related stresses. We present two models—one including only the stress generated by GPE and another reproducing the net stress field—and compare their predictions with the most up‐to‐date compilations of stress indicators, hypocenter clusters, and geodetic strain rates. The main effect of GPE is to induce second‐order spatial variations in the stress field. GPE appears to play an important role in high‐topography regions, where it explains deviatoric stress patterns mainly associated with extensional regimes. In north Iberia, especially in the Pyrenees and Cantabria, GPE causes an extensional regime over the highest peaks. In the Iberian Chain and eastern Betics, GPE is in agreement with the observed extensional deformation. Normal focal mechanisms of shallow earthquake clusters appear to be related with GPE maxima and GPE‐induced extensional regimes. Wavelength analysis suggests that both GPE and the long‐wavelength topography of intraplate Iberia record the plate boundary forces that acted in Iberia during the Alpine orogeny at Eocene to lower Miocene times.322 101
