Beauval, Céline
Preferred name
Beauval, Céline
9 results
Filters
Settings
The search returned 9 results
Now showing 1 - 9 of 9
- Some of the metrics are blocked by yourconsent settings
Item type:Publication, Access status: Open Access , The European Fault-Source Model 2020 (EFSM20): geologic input data for the European Seismic Hazard Model 2020
(2024-11-19); ; ; ; Pires Vilanova, Susana<jats:p>Abstract. Earthquake hazard analyses rely on seismogenic source models. These are designed in various fashions, such as point sources or area sources, but the most effective is the three-dimensional representation of geological faults. We here refer to such models as fault sources. This study presents the European Fault-Source Model 2020 (EFSM20), which was one of the primary input datasets of the recently released European Seismic Hazard Model 2020. The EFSM20 compilation was entirely based on reusable data from existing active fault regional compilations that were first blended and harmonized and then augmented by a set of derived parameters. These additional parameters were devised to enable users to formulate earthquake rate forecasts based on a seismic-moment balancing approach. EFSM20 considers two main categories of seismogenic faults: crustal faults and subduction systems, which include the subduction interface and intraslab faults. The compiled dataset covers an area from the Mid-Atlantic Ridge to the Caucasus and from northern Africa to Iceland. It includes 1248 crustal faults spanning a total length of ∼95 100 km and four subduction systems, namely the Gibraltar, Calabrian, Hellenic, and Cyprus arcs, for a total length of ∼2120 km. The model focuses on an area encompassing a buffer of 300 km around all European countries (except for Overseas Countries and Territories) and a maximum of 300 km depth for the subducting slabs. All the parameters required to develop a seismic source model for earthquake hazard analysis were determined for crustal faults and subduction systems. A statistical distribution of relevant seismotectonic parameters, such as faulting mechanisms, slip rates, moment rates, and prospective maximum magnitudes, is presented and discussed to address unsettled points in view of future updates and improvements. The dataset, identified by the DOI https://doi.org/10.13127/efsm20 (Basili et al., 2022), is distributed as machine-readable files using open standards (Open Geospatial Consortium). </jats:p>14 70 - Some of the metrics are blocked by yourconsent settings
Item type:Publication, Access status: Open Access , The 2020 European Seismic Hazard Model: overview and results
(2024-09-13); ; ; ; The 2020 update of the European Seismic Hazard Model (ESHM20) is the most recent and up-to-date assessment of seismic hazard for the Euro-Mediterranean region. The new model, publicly released in May 2022, incorporates refined and cross-border harmonized earthquake catalogues, homogeneous tectonic zonation, updated active fault datasets and geological information, complex subduction sources, updated area source models, a smoothed seismicity model with an adaptive kernel optimized within each tectonic region, and a novel ground motion characteristic model. ESHM20 supersedes the 2013 European Seismic Hazard Model (ESHM13; Woessner et al., 2015) and provides full sets of hazard outputs such as hazard curves, maps, and uniform hazard spectra for the Euro-Mediterranean region. The model provides two informative hazard maps that will serve as a reference for the forthcoming revision of the European Seismic Design Code (CEN EC8) and provides input to the first earthquake risk model for Europe (Crowley et al., 2021). ESHM20 will continue to evolve and act as a key resource for supporting earthquake preparedness and resilience throughout the Euro-Mediterranean region under the umbrella of the European Facilities for Seismic Hazard and Risk consortium (EFEHR Consortium).93 69 - Some of the metrics are blocked by yourconsent settings
Item type:Product, Access status: Open Access , 53 383 - Some of the metrics are blocked by yourconsent settings
Item type:Publication, Access status: Open Access , The 2020 European Seismic Hazard Model: Milestones and Lessons Learned
(Springer Nature, 2022-08-25); ; ; ; The 2020 update of the European Seismic Hazard Model (ESHM20) is the most recent seismic hazard model of the Euro-Mediterranean region. It was built upon unified and homogenized datasets including earthquake catalogues, active faults, ground motion recordings and state-of-the-art modelling components, i.e. earthquake rates forecast and regionally variable ground motion characteristic models. ESHM20 replaces the 2013 European Seismic Hazard Model (ESHM13), and it is the first regional model to provide two informative hazard maps for the next update of the European Seismic Design Code (CEN EC8). ESHM20 is also one of the key components of the first publicly available seismic risk model for Europe. This chapter provides a short summary of ESHM20 by highlighting its main features and describing some lessons learned during the model’s development.61 372 - Some of the metrics are blocked by yourconsent settings
Item type:Publication, Access status: Open Access , 3D GNSS Velocity Field Sheds Light on the Deformation Mechanisms in Europe: Effects of the Vertical Crustal Motion on the Distribution of Seismicity
(2022-05-11); ; ; ; Crustal deformation and seismicity in Europe are still poorly understood. Seismic activity is classically ascribed to crustal strain rates generated by edge-driven tectonic forces. However, crustal deformation is not only due to tectonic loading, but can also be related to isostatic and mantellic processes that induce additional stress and strain on the crust by flexure. The influence that those processes have on seismic activity, as well their interaction, is still controversial. The main limitation to study it is because the deformation and its causal mechanisms are usually analyzed separately in small regions. We present here a 3D secular velocity field that covers Eurasia and its plate boundaries including 4,863 Global Navigation Satellite System stations obtained by combining 10 different datasets. We have developed a method based on spatial filtering to identify outliers and smooth the velocity field, and have computed both strain and uplift rate maps that are interpreted in the light of the different driving processes that contribute to the 3D deformation in Europe. The vertical and horizontal deformation features are compared with seismic rates obtained from the spatial and temporal distribution of the seismicity in Europe. Our results suggest that is not possible to explain the seismicity in Europe with edge-driven horizontal tectonic forces only. In some areas markers of the crustal flexure such as the vertical velocity field and its derivative, resulting from buoyancy-driven processes, may help to interpret earthquake distribution.67 220 - Some of the metrics are blocked by yourconsent settings
Item type:Publication, Access status: Open Access , The 2020 update of the European Seismic Hazard Model: Model Overview. EFEHR Technical Report 001, v1.0.0
(2021-11-16); ; ; ; Executive Summary The 2020 European Seismic Hazard Model (ESHM20) provides an update of the earthquake hazard assessment of the Euro-Mediterranean region. ESHM20 has received funding from the European Union's Horizon 2020 research and innovation programme under grant agreement No.s 730900 of the SERAProject (www.sera-eu.org) The ESHM20 follows the same principles as the ESHM13, with state-of-the art procedures homogeneously applied for the entire pan-European region, without the country-borders issues. The model was built upon recently compiled datasets (i.e. earthquake catalogues, active faults, ground shaking recordings), information (tectonic and geological) and models (seismogenic sources, ground shaking). A fully probabilistic framework was adopted in the hazard model implementation and all datasets and inputs are fully cross-border harmonized. The newly developed seismogenic source model encompass fully harmonized and cross borders seismogenic sources following the recent national earthquake hazard models. The inherent uncertainties in characterizing the earthquake rupture forecast are handled by a complex logic tree, consisting of two main models (branches): an area source-based model and a hybrid fault-smoothed seismicity model. The ground motion characteristic model is built upon the most complete ground shaking recordings in Europe and aims at capturing the effects of source and attenuation path of the expected ground shaking at a site. The regional variability of the ground shaking as constrain by observations is captured by a novel approach of spatial clustering and the overall uncertainties are handled in a backbone logic tree. The master logic tree combines the earthquake rate forecast with the backbone ground motion models into a computational model for assessing the earthquake ground shaking at across the entire Euro- Mediterranean region. Full sets of hazard results (i.e. hazard curves and maps, uniform hazard spectra) for various combinations of return periods and descriptive statistics (mean, median and quantiles) are available. The ESHM20 development process involved several regional workshops where the scientists and experts were consulted and their feedback was acknowledged and considered on the model outcome. Finally, ESHM20 provides the basis to derive informative hazard maps for two key engineering parameters defining the anchoring points of the seismic design spectra for the next version of the European Seismic Design Code (CEN-EC8). The European Facilities for Earthquake Hazard and Risk (EFEHR) will maintain and further develop this model in collaboration with the GEM Foundation and the European Plate Observing System (EPOS). The source data, input models, software and outputs of ESRM20 are thus being openly released with a Creative Commons CC-BY International 4.0 license (https://creativecommons.org/licenses/by/4.0/). This license allows re-users to distribute, remix, adapt, and build upon the material in any medium or format, so long as attribution is given to the creator. The license allows for commercial use. Each product is released with a clear notice on how it should be cited in order to abide by the license. ESHM20 is online available at the www.hazard.EFEHR.org.482 2309 - Some of the metrics are blocked by yourconsent settings
Item type:Publication, Access status: Restricted , An Earthquake Catalog for the Lebanese Region
(2019-09-18); ; ; ; The present work aims at establishing an earthquake catalog for seismic hazard assessment in Lebanon. This catalog includes two different parts: historical earthquakes and instrumental earth- quakes. The first part of the article describes the work done on the period 31 B.C.E. to the end of the nineteenth century. Numerous studies published in the last 30 yr, devoted to pre- instrumental earthquakes in Lebanon, had not been included in any parametric earthquake catalog. A thorough and critical review of these studies was devised to check their respective interpretations of available earthquake records in terms of seis- mic parameters (date, location, and size) and to select for each earthquake the most reliable interpretation. The second part provides the details on the selection of instrumental solutions for the period 1900–2015 and for magnitudes ≥ 4. From global instrumental earthquake catalogs, we build a unified earthquake catalog for Lebanon and bordering regions. A selection scheme is applied for the choice of the best location and the best magni- tude among solutions available. The number of events in the catalog is relatively small, and all earthquakes can be checked one by one. The earthquake catalog is homogenized in moment magnitude. For 89% of the events, an Mw proxy was calculated from the original magnitude, applying conversion equations. The merging of the historical and instrumental periods high- lights a specificity of this zone: the instrumental seismicity (1900–2015) corresponds to a relatively quiet period for Lebanon. The historical part, covering 2000 yr, includes similar periods of quiescence, as well as much more active periods with destructive earthquakes.356 5 - Some of the metrics are blocked by yourconsent settings
Item type:Publication, Access status: Restricted , Twentieth century seismicity of the Koffiefontein region (Free State, South Africa): consistent determination of earthquake catalogue parameters from mixed data types
The preparation of earthquake catalogues for seismic hazard analysis requires the use of uniform parameters, in particular for magnitudes, although the original data include a variety of formats, such as macroseismic intensities and various instrumental mag- nitude scales. In regions of low seismicity, such as South Africa, data are generally sparse and not always suffi- cient to develop locally calibrated conversion relations. They can nevertheless be used to test the applicability of imported conversion relations, as well as their consis- tency. The Koffiefontein region of South Africa pro- vides a good test case in view of its somewhat higher level of seismicity, and central geographic location with- in the country. This paper reviews determinations of location and magnitude parameters for a suite of moderate-to-large earthquakes that have occurred in this region between 1903 and 1985.364 1 - Some of the metrics are blocked by yourconsent settings
Item type:Publication, Access status: Restricted , Toward a ground-motion logic tree for probabilistic seismic hazard assessment in Europe
(2012-02-22); ; ; ; The Seismic Hazard Harmonization in Europe (SHARE) project, which began in June 2009, aims at establishing new standards for probabilistic seismic hazard assessment in the Euro-Mediterranean region. In this context, a logic tree for ground-motion prediction in Europe has been constructed. Ground-motion prediction equations (GMPEs) and weights have been determined so that the logic tree captures epistemic uncertainty in ground-motion prediction for six different tectonic regimes in Europe. Here we present the strategy that we adopted to build such a logic tree. This strategy has the particularity of combining two complementary and independent approaches: expert judgment and data testing. A set of six experts was asked to weight pre-selected GMPEs while the ability of these GMPEs to predict available data was evaluated with the method of Scherbaum et al. (Bull Seismol Soc Am 99:3234–3247, 2009). Results of both approaches were taken into account to commonly select the smallest set of GMPEs to capture the uncertainty in ground-motion prediction in Europe. For stable continental regions, two models, both from eastern North America, have been selected for shields, and three GMPEs from active shallow crustal regions have been added for continental crust. For subduction zones, four models, all non-European, have been chosen. Finally, for active shallow crustal regions, we selected four models, each of them from a different host region but only two of them were kept for long periods. In most cases, a common agreement has been also reached for the weights. In case of divergence, a sensitivity analysis of the weights on the seismic hazard has been conducted, showing that once the GMPEs have been selected, the associated set of weights has a smaller influence on the hazard.249 20
