D’Ambrogi, Chiara
Preferred name
D’Ambrogi, Chiara
Main Affiliation
15 results
Filters
Settings
The search returned 15 results
Now showing 1 - 10 of 15
- Some of the metrics are blocked by yourconsent settings
Item type:Publication, Access status: Open Access , Deriving thrust fault slip rates from geological modeling: examples from the Marche coastal and offshore contraction belt, Northern Apennines, Italy.
We present a reconstruction of the central Marche thrust system in the central-northern Adriatic domain aimed at constraining the geometry of the active faults deemed to be potential sources of moderate to large earthquakes in this region and at evaluating their long-term slip rates. This system of contractional structures is associated with fault-propagation folds outcropping along the coast or buried in the offshore that have been active at least since about 3Myr. The ongoing deformation of the coastal and offshore Marche thrust system is associated with moderate historical and instrumental seismicity and recorded in sedimentary and geomorphic features. In this study, we use subsurface data coming from both published and original sources. These comprise cross-sections, seismic lines, subsurface maps and borehole data to constrain geometrically coherent local 3D geological models, with particular focus on the Pliocene and Pleistocene units. Two sections crossing five main faults and correlative anticlines are extracted to calculate slip rates on the driving thrust faults. Our slip rate calculation procedure includes a) the assessment of the onset time which is based on the sedimentary and structural architecture, b) the decompaction of clastic units where necessary, and c) the restoration of the slip on the fault planes. The assessment of the differential compaction history of clastic rocks eliminates the effects of compaction-induced subsidence which determine unwanted overestimation of slip rates. To restore the displacement along the analyzed structures, we use two different methods on the basis of the deformation style: the fault parallel flow algorithm for faulted horizons and the trishear algorithm for fault-propagation folds. The time of fault onset ranges between 5.3-2.2 Myr; overall the average slip rates of the various thrusts are in the range of 0.26-1.35 mm/yr.518 940 - Some of the metrics are blocked by yourconsent settings
Item type:Publication, Access status: Restricted , Mantle-derived CO2 migration along active faults within an extensional basin margin (Fiumicino, Rome, Italy)
Fluid migration along faults can be highly complex and spatially variable, with the potential for channeled flow, accumulation in capped porous units, fault cross-flow, lateral migration along strike, or complete sealing. Extensional basin margins can be important for such migration, given the associated crustal thinning and decompression that takes place combined with potential geothermal or mantle gas sources. One such example is near the urban area of Rome, situated along the active extensional continental margin of the Tyrrhenian back arc basin and surrounded by Middle-Upper Pleistocene K-rich and arc-related volcanoes. Recent research activities in the area around Fiumicino, a town 25 km to the west of Rome, has highlighted the close spatial link between degassing CO2 and the faults that provide the necessary vertical migration pathways. In particular, detailed soil gas and gas flux surveys have highlighted the release at surface of large volumes of asthenospheric mantle CO2 in correspondence with normal faults observed in a new seismic reflection profile acquired along the Tiber River. Detailed reconstruction of the Pleistocene–Holocene stratigraphy of the area dates fault activity from 20,000 to 9000 years BP. It is proposed that the gas migrates preferentially along the cataclastic tectonic breccias of the faults until it encounters recent, unconsolidated sediments; porous units within this shallow stratigraphy act as temporary secondary traps for the leaking gas, with local gas release at the ground surface occurring where the sealing of the overlying aquitards has been compromised. Degassing and active faults confirm the extensional tectonics affecting the area and the geodynamic scenario of a mantle wedge beneath the western Apennines, associated with ongoing W-directed subduction. Moreover, degassing highlights the potential geochemical and seismic risks for the highly populated urban areas near Rome.100 1 - Some of the metrics are blocked by yourconsent settings
Item type:Publication, Access status: Restricted , From cylindrical to non‐cylindrical foreland basin: Pliocene–Pleistocene evolution of the Po Plain–Northern Adriatic basin (Italy)
The architecture of foreland basins and the resulting distribution of clastic sediments are related to the constant interplay between tectonics and sedimentation. Specifically, basin floor modifications strongly influence dimensions, continuity and connections of sand‐size and fine‐grained deposits. Given the increasing need to identify deep potential reservoir deposits, the large‐scale definition of clastic porous targets and their seals is a matter of interest for oil and gas industry. Here, we present the reconstruction of the Po Plain and Northern Adriatic Foreland Basin (with an extent of ca. 40,000 km2) and its Pliocene–Pleistocene evolution, as an example of a sedimentary clastic system controlled by strongly non‐cylindrical foreland geometry. The study is based on the basin‐scale mapping of six unconformity‐bounded sequences, performed by interpreting a dense network of seismic lines and correlating well‐log data. This provides a three‐dimensional model of the step‐by‐step evolution of the basin and a description of the sediment dispersal pattern. We found that the basin records the change from a continuous (cylindrical) to highly fragmented (non‐cylindrical) foredeep geometry during Late Pliocene. In the Northern Apennines case, the main factors driving the development of a non‐cylindrical geometry are mainly related to inherited inhomogeneity in the downgoing block linked to its Mesozoic extensional faulting, and the relative orientation of these lineaments with respect to the direction of orogen migration. During the late Pliocene–Pleistocene the two directions progressively became close to parallel, and the Northern Apennines system reacted changing from a cylindrical to a non‐cylindrical state.230 4 - Some of the metrics are blocked by yourconsent settings
Item type:Publication, Access status: Open Access , Progetto RETRACE-3D - centRal italy EarThquakes integRAted Crustal modEl - Modello Geologico
(2021-03-29) ;RETRACE-3D, Working Group; ; ; Three-dimensional geological model of the area of the central Apennines affected by the 2016-2018 seismic sequence. The model consists of stratigraphic surfaces (top or basal unconformity of units, or sequences of units, with homogeneous behavior) and main faults of the area. The stratigraphic surfaces are, from the oldest to the most recent: the top of pre-Upper Triassic units, the top of the intra-Triassic units, the top of Calcare Massiccio, the top of the Marne157 97 - Some of the metrics are blocked by yourconsent settings
Item type:Publication, Access status: Open Access , RETRACE-3D PROJECT, a multidisciplinary approach for the construction of a 3D crustal model: first results and seismotectonic implications
(2018-11); ; ; ; The RETRACE-3D (centRal italy EarThquakes integRAted Crustal modEl) Project has been launched with the ambitious goal to build, as first result, a new, robust, 3D geological model of broad consensus of the area struck by the 2016-2018 Central Italy seismic sequence170 106 - Some of the metrics are blocked by yourconsent settings
Item type:Publication, Access status: Open Access , Slip-rates of blind thrusts in slow deforming areas: examples from the Po Plain (Italy)
(2015-01-02); ; ; ; Maesano, F. A.; ISPRA Servizio Geologico d’Italia, Via Vitaliano Brancati, 48, 00144 Roma, ItalyWe calculate Plio-Pleistocene slip rates on the blind thrusts of the outer Northern Apennines fronts, that are the potential sources of highly damaging earthquakes, as shown by the MW 6.1-6.0, 2012 Emilia-Romagna seismic sequence. Slip rates are a key parameter for understanding the seismogenic potential of active fault systems and assessing the seismic hazard they pose, however, they are difficult to calculate in slow deforming areas like the Po Plain where faulting and folding is mostly blind. To overcome this, we developed a workflow which included the preparation of a homogeneous regional dataset of geological and geophysical subsurface information, rich in Plio- Pleistocene data. We then constructed 3D geological models around selected individual structures to decompact the clastic units and restore the slip on the fault planes. The back-stripping of the differential compaction eliminates unwanted overestimation of the slip rates due to compactioninduced differential subsidence. Finally, to restore the displacement we used different methods according to the deformation style, i.e. Fault Parallel Flow for faulted horizons, trishear and elastic dislocation modeling for fault-propagation folds. The result of our study is the compilation of a slip rate database integrating former published values with 28 new values covering a time interval from the Pliocene to the present. It contains data on 14 individual blind thrusts including the Mirandola thrust, seismogenic source of the 29 May 2012, MW 6.0 earthquake. Our study highlights that the investigated thrusts were active with rates ranging between 0.1-1.0 mm/yr during the last 1.81 Myr. The Mirandola thrust slipped at 0.86±0.38 mm/yr during the last 0.4 Myr. These rates calculated with an homogeneous methodology through the entire Po Plain can be charged entirely to the thrust activity and not to secondary effects like the differential compaction of sediments across the structures.440 512 - Some of the metrics are blocked by yourconsent settings
Item type:Publication, Access status: Open Access , Site characterization of the national seismic network of Italy: results at five case studies
The seismic characterization of monitoring sites is a fundamental step in any study dealing with the estimation of site effects. The correct assessment of local amplification is also important in the definition of hazard maps, in order to taking into account the possible role of site effects in modifying the ground motion recording with respect to an ideal bedrock site. In the framework of the activity between Department of Civil Protection (DPC) and Istituto Nazionale di Geofisica e Vulcanologia (INGV) (DPC-INGV 2012-202, Allegato B2, Obiettivo 1, Task B), a campaign of site characterization started in 2016 for the estimation of the seismic response at some stations belonging to the National Accelerometric Network (RAN) and to National Seismic Network (RSN). The accelerometric data of these stations are collected in the ITACA database (Pacor et al. 2011) and in a structured archive managed by INGV (please refer to Bordoni et al. in session 2.1 of this conference). In this work, we focus on five seismic stations (CMP0, CDCA, ROM9, SANR, LAV9) installed in a different geological context. We show the strategy adopted for assessing the geological setting and velocity profile below the site and in the estimation of the soil class category. CMPO, SANR and CDCA are situated in alluvial environment (Reno Alluvial Plain, Veneto-Friuli Plain, Alto-Tiber plain, respectively) where the soft deposits show significant thickness (> 100 m), whereas ROM9 and LAV9 are characterized by the presence of volcanic deposits belonging to the Colli Albani hills. At ROM9 the thickness of the volcanic deposits is the order of 50 meters, at LAV9 the thickness is larger (> 100 m). As first step, a conceptual model has been derived by geological field surveys and collecting the available geological information (scientific agreement between ISPRA and INGV). The results of this step are basically 2D geological models and a lithostratigraphic and lithotechnical classification of the outcropping units. Further, a geophysical survey at each site was carried out using surface-wave methods. We deployed 2D arrays of seismic three-components stations recording ambient vibration (or ambient seismic noise) in proximity of the target site to measure the dispersion curve following the recent guidelines (Foti et al, 2017). Passive 2D arrays recorded ambient noise for a total duration of some hours at each site. The array geometry was defined according to the logistic, and when possible two geometries with a progressive larger aperture were used at a same site (Fig. 1). The maximum aperture of the 2D arrays varies approximately from 100 to 400 m using a number of seismic stations from 8 to 14 depending on the site. At LAV9 site, we combined passive 2D array with a linear array of geophones equally spaced and using an active source (a weight body of 50 kg falling down from a height of about 2 m). Frequency-wavenumber and spatial auto-correlation methods derive a dispersion curve (Fig. 2). The inversion of the dispersion curves jointly with the horizontal-to-vertical spectral ratio (H/V curve) provides the local shear-wave velocity (Vs) profile. The soil class was finally assigned computing the mean value of the shear-wave best velocity models in the uppermost 30 m (as prescribed by the national seismic design code). As example, Fig. 3 displays the comparison at ROM9 between the local Vs profile derived from surface-wave analysis and the lithostratigraphical log obtained from the geological analysis. The Vs profile of ROM9 is able to individuate the contact at a depth of about 50 m between the volcanic deposits and the underlying clay (Monte Vaticano Unit, Pliocene). In detail from top to bottom in the velocity model of Fig. 3: after few meters of very soft soil (Vs < 200 m/s), the volcanic deposits show Vs values of 400-500 m/s, whereas the consolidated clay of the Monte Vaticano Formation shows Vs values larger than 600 m/s. The Vs30 at ROM9 resulting from this model is 410 m/s, being B the corresponding soil class category following the national code. As general comment resulting from this experience, a correct use of the surface-wave methods integrated with geological data is able to provide a reliable Vs profile that can be used to include the local effects in the seismic response of the site. However, it is important to highlight that we do not obtain always a perfect match between dispersion curves derived at a same site when we used different array geometry and source. The reasons of these discrepancies are not clear and need deeper investigation. A final consideration is that a suitable site classification is possible only with accurate geological and geophysical surveys. In presence of a reliable estimation of the local velocity profiles at the sites where seismic stations are installed, strong-motion data can be properly used for seismic hazard and site response studies.303 232 - Some of the metrics are blocked by yourconsent settings
Item type:Publication, Access status: Open Access , RETRACE-3D project: a multidisciplinary collaboration to build a crustal model for the 2016-2018 central Italy seismic sequence
The RETRACE-3D project (centRal italy EarThquakes integRAted Crustal model) focused on the revision of all the available geological and geophysical data in the area interested by the 2016-2018 seismic sequence of central Italy, with the final aim to reconstruct a reliable and consistent 3D geological model of that area. It is based on a collaboration, which was framed into a formal agreement, between Dipartimento della Protezione Civile (the Italian Civil Protection Department), Istituto di Geologia Ambientale e Geoingegneria, and Istituto per il Rilevamento Elettromagnetico of the Consiglio Nazionale delle Ricerche, Istituto Nazionale di Geofisica e Vulcanologia, and Istituto Superiore per la Protezione e la Ricerca Ambientale. The agreement purpose was to develop a project aimed at the geological and seismotectonic characterisation of the crustal volume hosting that seismic sequence. We present and discuss the approach, methodology and results of the project. The 3D geological model of the study area is developed in detail down to a depth of about 12 km, and extended to the Moho based on available regional-scale information. The model is available on the RETRACE-3D project website (www.retrace3d.it).3102 359 - Some of the metrics are blocked by yourconsent settings
Item type:Publication, Access status: Open Access , The impact of structural complexity, fault segmentation, and reactivation on seismotectonics: Constraints from the upper crust of the 2016–2017 Central Italy seismic sequence area
Young and tectonically active chains like the Central Apennines (Italy) are featured by high structural complexity as a result of the overprint of subsequent deformational stages, making interpretation of seismotectonics challenging. The Central Apennines are characterized by the stacking of tectono-sedimentary units organized in thrust sheets. However, extensional tectonics is currently affecting the axial sector of the thrust belt, mostly expressing in extensional earthquakes. Using a large subsurface dataset acquired for hydrocarbon exploration in the region struck by the 2016–2017 Central Italy seismic sequence, we built a comprehensive 3D geological model and compared it with the seismicity. The model primarily shows a series of thrusts developed during the Miocene-Pliocene Apennines orogenesis and inherited normal faults developed during the Mesozoic extensional phase and the Miocene foreland flexural process. These normal faults were segmented and transported within the thrust sheets, and sometimes they still show a clear surface expression. The succession of tectonic stages resulted in a widespread reactivation of inherited structures, sometimes inverting their kinematics with different styles and rates, and disarticulating pre-existing configurations. Such evolution has a strong impact on the seismicity observed in the area, as demonstrated by some examples that show how the seismicity is aligned on segments of inherited faults, both compressional and extensional. Their reactivation can be explained by their favorable orientation within the current extensional stress field. Results feed the debate about the seismogenic potential of faults identified both at depth and surface, which can impact the seismic hazard of the Apennines.385 356 - Some of the metrics are blocked by yourconsent settings
Item type:Publication, Access status: Open Access , 2D gravity modelling in Central Italy: Clues for the seismogenesis in the Apennines
(Elsevier BV:PO Box 211, 1000 AE Amsterdam Netherlands:011 31 20 4853757, 011 31 20 4853642, 011 31 20 4853641, EMAIL: nlinfo-f@elsevier.nl, INTERNET: http://www.elsevier.nl, Fax: 011 31 20 4853598, 2026-02-03); ; ; ; In the Central Apennines (Italy), the most updated reliable 3D geological models of the crust in the area affected by the 2016-17 Amatrice-Visso-Norcia seismic sequence highlighted that the coseismic rupture at the surface can involve old inherited normal faults, while the seismogenic sources lay at depth, possibly reactivating and inverting previous thrust faults, as in the case of the Mw 6.5 Norcia earthquake (30 October 2016). Here, we present a 2D gravity model across the Central Apennines to complete and confirm the crustal geometries resulting from the 3D model itself. The cross-section was built by integrating different data types, including surface geology, hydrocarbon wells, seismic profiles, and results from receiver function analysis. It was then checked against gravity anomalies and the velocity distribution from Local Earthquake Tomography (LET), adding further details, and, finally, against seismicity recorded during the 2016-2017 sequence. The results substantiate the reliability of the geometries proposed in the RETRACE-3D model, as they fit well, except for some local misfits, with other independent data, such as the Bouguer anomalies and the velocity distribution from LET. Furthermore, integrating different data types allowed us to provide a detailed description of the structural setting of the Apennine chain and the surroundings of the RETRACE-3D study area and to identify some new features at seismogenic depths beyond those typically targeted in hydrocarbon exploration. In particular, we were able to investigate the nature of the basement top and its relationship with seismotectonics. Plain language summary: Specific knowledge of the Earth's crust structures and our ability to image them in three dimensions are crucial for improving the understanding of the tectonic processes, particularly those responsible for generating earthquakes. The RETRACE-3D project produced a 3D model of the crust down to depths of 5-10 km in the area of the Central Apennines hit by the 2016-2017 seismic sequence. In this study, we analysed the gravity anomalies along a 2D cross-section to validate these results and to extend our knowledge to the surrounding areas and greater depths. Gravity anomalies make it possible to detect density variations within the crust, which can be related to the presence of specific geological units. Our analysis validated the RETRACE-3D project findings and provided insights into the nature of the upper crust at the base of the sedimentary succession. In particular, we identified an ancient (Permian-Triassic) sedimentary body, whose presence and current position appear to be closely related to the seismotectonics of the area.7 94
