Skip to main content
The search returned 7 results
Now showing 1 - 7 of 7
  • Some of the metrics are blocked by your 
    Item type:Publication, Access status: Open Access ,

    The GNSS velocity field of central Greece and the Peloponnese

    (-UK: John Wiley & Sons, Inc. -[Oxford]: Blackwell Science., 2026-06-12) ; ; ; ;
    We present a comprehensive dataset of 920 coordinates and 509 velocities for geodetic points in central Greece and the Peloponnese, an area characterised by intense tectonic deformation. The points, with observation periods within the 1990–2024 range, are organised into three categories: permanent stations, triangulation pillars, and markers. The latter two categories are subdivided according to whether or not they feature self-centring. Most of the triangulation pillars belong to the Greek national network originally surveyed in the 1960s–70s. The GNSS data were processed using the GIPSY 6.4 software. To assess the secular velocities, we corrected for co-seismic and post-seismic displacements using earthquake parameters constrained by the time series of the permanent stations. Self-centring systems improve precision, reducing the average horizontal coordinate residual variability from 6.15 to 4.45 mm. The velocity uncertainties stabilise below 0.15 mm yr−1 when the time series exceed twenty years. Points with self-centring achieve 0.2 mm yr−1 accuracy after twelve years of data, compared to twenty years for those without self-centring. After twenty-five years, campaign points observed eight to ten times match the precision of permanent stations. The velocities at the campaign points further validate the HELVEL model previously developed using permanent stations only. We calculate a seven-parameter transformation from the original coordinates of 424 triangulation pillars to their GNSS-based ITRF2020 coordinates at epoch 2020.0. The lowest mean scatter after the transformation is 0.134 m when 1965 is used as the mean epoch for the triangulation data. We then apply this transformation to all 9,729 pillars of the study area. At the 424 resurveyed pillars, the GNSS ellipsoidal heights agree with the sum of the levelled heights and the official HG2023 geoid heights to within 0.184 m root-mean-square. Our dataset is entirely referenced to ITRF2020 at epoch 2020.0, which enables interoperability with previous and future geodetic studies. Dense campaign point arrays are critical for resolving the strain distribution at the scale of individual active faults, beyond the reach of arrays of permanent stations alone.
      2  13
  • Some of the metrics are blocked by your 
    Item type:Publication, Access status: Open Access ,

    Ionospheric response to the 2020 Samos earthquake and tsunami

    On 30 October 2020 at 11:51 UT, a magnitude 7.0 earthquake occurred in the Dodecanese sea (37.84°N, 26.81°E, 10 km depth) and generated a tsunami with an observed run-up of more than 1 m on the Turkish coasts. Both the earthquake and the tsunami produced acoustic and gravity waves that propagated upward, triggering co-seismic and co-tsunamic ionospheric disturbances. This paper presents a multi-instrumental study of the ionospheric impact of the earthquake and related tsunami based on ionosonde data, ground-based Global Navigation Satellite Systems (GNSS) data and data from DORIS beacons received by Jason3 in the Mediterranean region. Our study focuses on the Total Electron Content to describe the propagation of co-seismic and co-tsunami ionospheric disturbances (CSID, CTID), possibly related to gravity waves triggered by the earthquake and tsunami. We use simultaneous vertical ionosonde soundings to study the interactions between the upper and lower atmosphere, highlighting the detection of acoustic waves generated by the seismic Rayleigh waves reaching the ionosonde locations and propagating vertically up to the ionosphere. The results of this study provide a detailed picture of the Lithosphere-Atmosphere–Ionosphere coupling in the scarcely investigated Mediterranean region and for a relatively weak earthquake.
      145  124
  • Some of the metrics are blocked by your 
    Item type:Publication, Access status: Restricted ,

    Using kinematic GNSS data to assess the accuracy and precision of the TanDEM-X DEM resampled at 1 m resolution over the western Corinth Gulf, Greece

    We assess the accuracy and the precision of the TanDEM-X digital elevation model (DEM) of the western Gulf of Corinth, Greece. We use for that a dense set of accurate ground coordinates obtained by kinematic GNSS observations. Between 2001 and 2019, 148 surveys were made, at 1 s sampling rate, along highways, roads and tracks, with a total traveled distance of ~25,000 km. The data are processed with the on-line Canadian Spatial Reference System precise point positioning software. From the output files, we select 885,252 coordinates from epochs with theoretical uncertainty below 0.1 m in horizontal and 0.2 m in vertical. Using specific calibration surveys we estimate the mean vertical accuracy of the GNSS coordinates at 0.2 m. Resampling the DEM by a factor of ten allows to compare it with the GNSS in pixels of metric size, thus smaller than the width of the roads, even the small trails. The best fit is obtained by shifting the DEM by 0.47 ± 0.03 m upward, 0.10 ± 0.1 m westward, and 0.36 ± 0.1 m southward. Those values are twenty times below the nominal resolution of the DEM. Once the shift is corrected, the root mean square deviation between TanDEM-X DEM and GNSS elevations is 1.125 m. In forest and urban areas, the shift between the DEM and the GNSS increases by ~0.5 m. The metric accuracy of the TanDEM-X DEM paves the way for new applications for long-term deformation monitoring of this area.
      165  44
  • Some of the metrics are blocked by your 
    Item type:Publication, Access status: Open Access ,

    Ground Deformation and Seismic Fault Model of the M6.4 Durres (Albania) Nov. 26, 2019 Earthquake, based on GNSS/INSAR Observations

    We identify the source of the Mw = 6.4 earthquake that rocked north-central Albania on November 26, 2019 02:54 UTC. We use synthetic aperture radar interferograms tied to the time series of coordinates of two permanent Global Navigation Satellite System (GNSS) stations (DUR2 and TIR2). We model the source by inverting the displacement data. Assuming in our model a half-space elastic medium and uniform slip along a rectangular fault surface, we invert the 104 picked measurements on a couple of ascending and descending interferograms to calculate the parameters of the fault. All inversions made with di erent input parameters converge towards a stable and robust solution with root mean square (r.m.s.) residual of 5.4 mm, thus ~1/5 of a fringe. They reveal that the earthquake occurred deep in the crust on a low-angle fault (23 ) dipping towards east with a centroid at 16.5 km depth. The best-fitting length and width of the fault are 22 and 13 km, and the reverse slip, 0.55 m. The seismic moment deduced from our model agrees with those of the published seismic moment tensors. This geometry is compatible with a blind thrust fault that may root on the main basal thrust, i.e., along the thrust front that separates Adria–Apulia from Eurasia. It is notable that there is a 123 ns yr-1 active shortening of the crust between the GNSS stations DUR2-TIR2 (equivalent to a shortening rate of 3.6 mm yr-1), and roughly in the east–west direction. Given this amount of strain the recurrence time of M6+ earthquakes along this fault should be of the order of 150 years.
      188  122
  • Some of the metrics are blocked by your 
    Item type:Publication, Access status: Restricted ,

    Coseismic deformation, field observations and seismic fault of the 17 November 2015M=6.5, Lefkada Island, Greece earthquake

    On November 17, 2015 07:10:07 UTC a strong, shallow Mw6.5 earthquake, occurred on the island of Lefkada along a strike-slip fault with right-lateral sense of slip. The event triggered widespread environmental effects at the south and western part of the island while, the intensity and severity of these earthquake-induced deformations is substantially decreased towards the eastern part of the island. Relocation of seismicity and inversion of geophysical (GPS, InSAR) data indicate that the seismic fault runs parallel to the west coast of Lefkada, along the Aegean – Apulia plate boundary. The fault plane strikes N20 ± 5°E and dips to east with an angle of about 70 ± 5°. Coseismic deformation was measured in the order of tens of centimeters of horizontal motion by continuous GPS stations of NOANET (the NOA GPS network) and by InSAR (Sentinel 1 A image pairs). A coseismic uniform-slip model was produced from inversion of InSAR data and permanent GPS stations. The earthquake measured Mw = 6.5 using both the geodetic moment produced by the slip model, as well as the PGD relation of Melgar et al. (2015, GRL). In the field we observed no significant vertical motion of the shoreline or surface expression of faulting, this is consistent with the predictions of the model. The interferograms show a large decorrelation area that extends almost along all the western coast of Lefkada. This area correlates well with the mapped landslides. The 2003–2015 pattern of seismicity in the Ionian Sea region indicates the existence of a 15-km seismic gap offshore NW Cephalonia.
      277  3
  • Some of the metrics are blocked by your 
    Item type:Publication, Access status: Open Access ,

    The European Ionosonde Service: nowcasting and forecasting ionospheric conditions over Europe for the ESA Space Situational Awareness services

    The Earth’s ionosphere is a magnetoionic medium imbedded in a background neutral atmosphere, exhibiting very interesting refractive properties, including anisotropy, dispersion, and dissipation. As such, it poses a challenge for several radio systems that make use of signal transmission through all or some portion of the medium. It is important therefore to develop prediction systems able to inform the operators of such systems about the current state of the ionosphere, about the expected effects of forthcoming space weather disturbances and about support long-term planning of operations and data post-processing projects for improving modelling and mitigation techniques. The European Space Agency (ESA) in the framework of the Space Situational Awareness (SSA) Programme has supported the development of the European Ionosonde Service (EIS) that releases a set of products to characterise the bottomside and topside iono- sphereoverEurope.The Service is based on a set of prediction models driven by data from ground based ionosondes and supportive data from satellites and spacecraft. The service monitors the foF2 and the electron density profile up to the height of the Global Navigation Satellite System (GNSS) at European middle and high latitudes and provides estimates for forth coming disturbances mainly triggered by geoeffective Coronal Mass Ejections (CMEs).The model’s performance has been validated and based on these results ,it was possible to issue together with the products, quality metrics characterizing the product’s reliability. The EIS products meet the requirements of various SSA service domains, especially the transionospheric radio link and the spacecraft operations. Currently, the service is freely available to all interested users, and access is possible upon registration.
      157  95
  • Some of the metrics are blocked by your 
    Item type:Publication, Access status: Restricted ,

    3D displacement maps of the 2009 L'Aquila earthquake (Italy) by applying the SISTEM method to GPS and DiNSAR data

    We present an application of the novel SISTEM approach, to obtain the dense 3D ground deformation pattern produced by the April 6, 2009, Mw 6.3 L’Aquila earthquake. This event, characterized by a SW-dipping normal fault with thousands of foreshocks and aftershocks located in the depth range 5–15 km, is the most destructive to have struck the Abruzzo region since the major 1703 seismic sequence. The surface deformation, revealed by the SISTEM through the integration of GPS with interferometric measurements from the ENVISAT and ALOS satellites, shows a deformed area extending towards SE along the Aterno valley, in agreement with seismological and other geodetic observations. We inverted the SISTEM results using an optimization algorithm based on the genetic algorithm, providing an accurate spatial characterization of ground deformation. Our results improve previous kinematic solutions for the Paganica fault and allow identification of additional faults that have contributed to the observed complex ground deformation pattern.
      219  24