Briole, Pierre
Preferred name
Briole, Pierre
Main Affiliation
36 results
Filters
Settings
The search returned 36 results
Now showing 1 - 10 of 36
- Some of the metrics are blocked by yourconsent settings
Item type:Publication, Access status: Open Access , The GNSS velocity field of central Greece and the Peloponnese
(-UK: John Wiley & Sons, Inc. -[Oxford]: Blackwell Science., 2026-06-12); ; ; ; We present a comprehensive dataset of 920 coordinates and 509 velocities for geodetic points in central Greece and the Peloponnese, an area characterised by intense tectonic deformation. The points, with observation periods within the 1990–2024 range, are organised into three categories: permanent stations, triangulation pillars, and markers. The latter two categories are subdivided according to whether or not they feature self-centring. Most of the triangulation pillars belong to the Greek national network originally surveyed in the 1960s–70s. The GNSS data were processed using the GIPSY 6.4 software. To assess the secular velocities, we corrected for co-seismic and post-seismic displacements using earthquake parameters constrained by the time series of the permanent stations. Self-centring systems improve precision, reducing the average horizontal coordinate residual variability from 6.15 to 4.45 mm. The velocity uncertainties stabilise below 0.15 mm yr−1 when the time series exceed twenty years. Points with self-centring achieve 0.2 mm yr−1 accuracy after twelve years of data, compared to twenty years for those without self-centring. After twenty-five years, campaign points observed eight to ten times match the precision of permanent stations. The velocities at the campaign points further validate the HELVEL model previously developed using permanent stations only. We calculate a seven-parameter transformation from the original coordinates of 424 triangulation pillars to their GNSS-based ITRF2020 coordinates at epoch 2020.0. The lowest mean scatter after the transformation is 0.134 m when 1965 is used as the mean epoch for the triangulation data. We then apply this transformation to all 9,729 pillars of the study area. At the 424 resurveyed pillars, the GNSS ellipsoidal heights agree with the sum of the levelled heights and the official HG2023 geoid heights to within 0.184 m root-mean-square. Our dataset is entirely referenced to ITRF2020 at epoch 2020.0, which enables interoperability with previous and future geodetic studies. Dense campaign point arrays are critical for resolving the strain distribution at the scale of individual active faults, beyond the reach of arrays of permanent stations alone.2 13 - Some of the metrics are blocked by yourconsent settings
Item type:Publication, Access status: Open Access , The 2 December 2020 MW 4.6, Kallithea (Viotia), central Greece earthquake: a very shallow damaging rupture detected by InSAR and its role in strain accommodation by neotectonic normal faults
On 2 December 2020 10:54 UTC a shallow earthquake of MW (NOA) = 4.6 occurred near the village of Kallithea (to the east of Thiva), central Greece, which, despite its modest size, was locally damaging. Using InSAR and GNSS data, we mapped a permanent change on the ground surface, i.e., a subsidence of 7 cm. Our geodetic inversion modelling indicates that the rupture occurred on a WNW–ESE striking, SSW-dipping normal fault, with a dip-angle of ~ 54°. The maximum slip value was 0.35 m, which was reached at a depth of about 1100 m. The analysis of broadband seismological data also provided kinematic source parameters such as moment magnitude MW = 4.6 (± 0.1), rupture area 6.3 km2 and mean slip 0.16 m, which agree with the values obtained from the geodetic model. The effects of the earthquake were disproportionate to its moderate magnitude, probably due to its unusually shallow depth (slip centroid at 1.1 km) and the high efficiency of the earthquake (radiation efficiency = 0.62). The geodetic data inversion also indicates that within the uncertainty limits of the technique, three scenarios are possible (a) the earthquake responsible for the mapped surface deformation may have occurred on a ~ 2-km long, blind normal fault different from the well-known active Kallithea normal fault or (b) could have occurred along a secondary fault that branches off the Kallithea fault or (c) it may have occurred along the Kallithea fault itself, but with its geometrical configuration could not be modelled with available data. We have also concluded that with a high dip-angle Kallithea Fault forward model it is not possible to fit the geodetic data. The rupture initiated at a very shallow depth (1.1 km) and it could not propagate deeper possibly because of a structural barrier down-dip. The 2020 event near Kallithea highlighted the structural complexity in this region of the Asopos Rift valley as the reactivation of the WNW–ESE structures indicates their significant role in strain accommodation and that they still represent a seismic hazard for this region.46 110 - Some of the metrics are blocked by yourconsent settings
Item type:Publication, Access status: Open Access , The ground deformation of the south-eastern flank of Mount Etna monitored by GNSS and SAR interferometry from 2016 to 2019
The south-eastern sector of the Mount Etna, Italy, is characterized by numerous active faults, in particular the Belpasso–Ognina lineament, the Tremestieri–San Gregorio–Acitrezza fault, the Trecastagni fault and the Fiandaca–Nizzeti fault including the Timpe Fault System. Their activity is the result of both volcanism and tectonics. Here, we analyse the ground deformation occurred from 2016 to 2019 across those active faults by using the GNSS data acquired at 22 permanent stations and 35 campaign points observed by the Etna Observatory (INGV) and by the University of Catania. We also use the time-series of line of sight displacement of permanent scatterers SENTINEL-1 A-DInSAR obtained by using the P-SBAS tool of the ESA GEP-TEP (Geohazards Thematic Exploitation Platform) service. We discriminate the contributions of the regional tectonic strain, the inflations, the deflations of the volcano and the gravitational sliding in order to analyse the deformation along the faults of the south-eastern flank of Etna. The shallow and destructive Mw = 4.9 earthquake of 2018 December 26 occurred within the studied area two days after a dyke intrusion, that propagated beneath the centre of the volcano accompanied by a short eruption. Both GNSS and InSAR time-series document well those events and allow to investigate the post-seismic sliding across the faults of south-eastern flank. We analyse the slow slip events (SSE) that are observed in the GNSS and InSAR time-series in the vicinity of the Acitrezza fault. We quantify and discuss the tectonic origin of the Belpasso–Ognina lineament that we interpreted as a tear fault.126 297 - Some of the metrics are blocked by yourconsent settings
Item type:Publication, Access status: Open Access , Water Vapor Tomography of the Lower Atmosphere from Multiparametric Inversion: the Mt. Etna Volcano Test Case
Space techniques based on GPS and SAR interferometry allow measuringmillimetric ground deformations. Achieving such accuracy means removing atmospheric anomalies that frequently affect volcanic areas by modeling the tropospheric delays. Due to the prominent orography and the high spatial and temporal variability of weather conditions, the active volcano Mt. Etna (Italy) is particularly suitableto carry out research aimed at estimating and filtering atmospheric effects on GPS and DInSAR grounddeformation measurements. The aim of this work is to improve the accuracy of the ground deformation measurements by modeling the tropospheric delays at Mt. Etna volcano. To this end, data from the monitoring network of 29 GPS permanent stations and MODIS multispectral satellite data series are used to reproduce the tropospheric delays affecting interferograms. A tomography algorithm has been developed to reproduce the wet refractivityfield over Mt. Etna in 3D, starting from the slant tropospheric delays calculated by GPS in all the stations of the network. The developed algorithm has been tested on a synthetic atmospheric anomaly. The test confirms the capability of the software to faithfully reconstruct the simulated anomaly. With the aim of applying this algorithm to real cases, we introduce the water vapor contentmeasured by the MODIS instrument on board Terra and Aqua satellites. The use of such data,although limited by cloud cover, provides a two-fold benefit: it improves the tomographic resolution and adds feedback for the GPS wet delay measurements. A cross-comparison between GPS and MODIS water vapor measurements for thefirst time shows a fair agreement between those indirect measurements on an entire year of data (2015). The tomography algorithm was applied on selected real cases to correct the Sentinel-1 DInSAR interferograms acquired over Mt. Etna during 2015. Indeed, the corrected interferograms show that the differential path delay reaches 0.1 m (i.e. 3 C-band fringes) in ground deformation, demonstrating how the atmospheric anomaly affects precision and reliability of DInSAR space-based techniques. The real cases show that the tomography is often able to capturethe atmospheric effect at the large scale and correct interferograms, although in limited areas. Furthermore, the introduction of MODIS data significantly improves by ∼80% voxel resolution at the critical layer (1,000 m). Further improvements will be suitable for monitoring active volcanoes worldwide.307 148 - Some of the metrics are blocked by yourconsent settings
Item type:Publication, Access status: Restricted , Using kinematic GNSS data to assess the accuracy and precision of the TanDEM-X DEM resampled at 1 m resolution over the western Corinth Gulf, Greece
We assess the accuracy and the precision of the TanDEM-X digital elevation model (DEM) of the western Gulf of Corinth, Greece. We use for that a dense set of accurate ground coordinates obtained by kinematic GNSS observations. Between 2001 and 2019, 148 surveys were made, at 1 s sampling rate, along highways, roads and tracks, with a total traveled distance of ~25,000 km. The data are processed with the on-line Canadian Spatial Reference System precise point positioning software. From the output files, we select 885,252 coordinates from epochs with theoretical uncertainty below 0.1 m in horizontal and 0.2 m in vertical. Using specific calibration surveys we estimate the mean vertical accuracy of the GNSS coordinates at 0.2 m. Resampling the DEM by a factor of ten allows to compare it with the GNSS in pixels of metric size, thus smaller than the width of the roads, even the small trails. The best fit is obtained by shifting the DEM by 0.47 ± 0.03 m upward, 0.10 ± 0.1 m westward, and 0.36 ± 0.1 m southward. Those values are twenty times below the nominal resolution of the DEM. Once the shift is corrected, the root mean square deviation between TanDEM-X DEM and GNSS elevations is 1.125 m. In forest and urban areas, the shift between the DEM and the GNSS increases by ~0.5 m. The metric accuracy of the TanDEM-X DEM paves the way for new applications for long-term deformation monitoring of this area.165 44 - Some of the metrics are blocked by yourconsent settings
Item type:Publication, Access status: Open Access , Small-scale volcanic aerosols variability, processes and direct radiative impact at Mount Etna during the EPL-RADIO campaigns
The aerosol properties of Mount Etna's passive degassing plume and its short-term processes and radiative impact were studied in detail during the EPL-RADIO campaigns (summer 2016-2017), using a synergistic combination of observations and radiative transfer modelling. Summit observations show extremely high particulate matter concentrations. Using portable photometers, the first mapping of small-scale (within [Formula: see text] from the degassing craters) spatial variability of the average size and coarse-to-fine burden proportion of volcanic aerosols is obtained. A substantial variability of the plume properties is found at these spatial scales, revealing that processes (e.g. new particle formation and/or coarse aerosols sedimentation) are at play, which are not represented with current regional scale modelling and satellite observations. Statistically significant progressively smaller particles and decreasing coarse-to-fine particles burden proportion are found along plume dispersion. Vertical structures of typical passive degassing plumes are also obtained using observations from a fixed LiDAR station constrained with quasi-simultaneous photometric observations. These observations are used as input to radiative transfer calculations, to obtain the shortwave top of the atmosphere (TOA) and surface radiative effect of the plume. For a plume with an ultraviolet aerosol optical depth of 0.12-0.14, daily average radiative forcings of [Formula: see text] and [Formula: see text], at TOA and surface, are found at a fixed location [Formula: see text] downwind the degassing craters. This is the first available estimation in the literature of the local radiative impact of a passive degassing volcanic plume.631 141 - Some of the metrics are blocked by yourconsent settings
Item type:Publication, Access status: Open Access , Ground Deformation and Seismic Fault Model of the M6.4 Durres (Albania) Nov. 26, 2019 Earthquake, based on GNSS/INSAR Observations
We identify the source of the Mw = 6.4 earthquake that rocked north-central Albania on November 26, 2019 02:54 UTC. We use synthetic aperture radar interferograms tied to the time series of coordinates of two permanent Global Navigation Satellite System (GNSS) stations (DUR2 and TIR2). We model the source by inverting the displacement data. Assuming in our model a half-space elastic medium and uniform slip along a rectangular fault surface, we invert the 104 picked measurements on a couple of ascending and descending interferograms to calculate the parameters of the fault. All inversions made with di erent input parameters converge towards a stable and robust solution with root mean square (r.m.s.) residual of 5.4 mm, thus ~1/5 of a fringe. They reveal that the earthquake occurred deep in the crust on a low-angle fault (23 ) dipping towards east with a centroid at 16.5 km depth. The best-fitting length and width of the fault are 22 and 13 km, and the reverse slip, 0.55 m. The seismic moment deduced from our model agrees with those of the published seismic moment tensors. This geometry is compatible with a blind thrust fault that may root on the main basal thrust, i.e., along the thrust front that separates Adria–Apulia from Eurasia. It is notable that there is a 123 ns yr-1 active shortening of the crust between the GNSS stations DUR2-TIR2 (equivalent to a shortening rate of 3.6 mm yr-1), and roughly in the east–west direction. Given this amount of strain the recurrence time of M6+ earthquakes along this fault should be of the order of 150 years.188 122 - Some of the metrics are blocked by yourconsent settings
Item type:Publication, Access status: Open Access , The 2018 Mw 6.8 zakynthos (Ionian Sea, Greece) Earthquake: Seismic source and local tsunami characterization
We investigated the kinematic rupture model of the 2018 Mw 6.8 Zakynthos, Ionian Sea (Greece), earthquake by using a non-linear joint inversion of strong motion data, high-rate GPS time series, and static co-seismic GPS displacements. We also tested inversion results against tide-gauge recordings of the small tsunami generated in the Ionian Sea. In order to constrain the fault geometry, we performed several preliminary kinematic inversions by assuming the parameter values resulting from different published moment tensor solutions. The lowest cost function values were obtained by using the geometry derived from the United States Geological Survey (USGS) focal solution. Between the two conjugate USGS planes, the rupture model which better fits the data is the one with the N9° E-striking 39°-ESE-dipping plane. The rupture history of this model is characterized by a bi-lateral propagation, featuring two asperities; a main slip patch extending between 14 and 28 km in depth, 9 km northeast from the nucleation and a slightly shallower small patch located 27 km southwest from the nucleation. The maximum energy release occurs between 8 s and 12 s, when both patches are breaking simultaneously. The maximum slip is 1.8 m and the total seismic moment is 2.4 × 1019 Nm, corresponding to a Mw value of 6.8. The slip angle shows a dominant right-lateral strike-slip mechanism, with a minor reverse component that increases on the deeper region of the fault. This result, in addition to the observed possibility of similar mechanisms for previous earthquakes occurred in 1959 and 1997, suggests that the tectonic deformation between the Cephalonia Transform Fault Zone and the northern tip of the Hellenic Arc Subduction zone may be accommodated by prevailing right lateral low-dipping faults, occurring on re-activated structures previously experiencing (until Pliocene) compressional regime. Comparison of predicted and observed tsunami data suggests the need of a better characterisation of local harbour response for this type of relatively short-wavelength events, which is important in the context of tsunami early warning. However, the suggested dominantly strike-slip character would in turn imply a reduced tsunami hazard as compared to a dominant thrust faulting regime from this source region.652 264 - Some of the metrics are blocked by yourconsent settings
Item type:Publication, Access status: Open Access , A New Degassing Model to Infer Magma Dynamics from Radioactive Disequilibria in Volcanic Plumes
Mount Etna volcano (Sicily, Italy) is the place where short-lived radioactive disequilibrium measurements in volcanic gases were initiated more than 40 years ago. Almost two decades after the last measurements in Mount Etna plume, we carried out in 2015 a new survey of 210Pb-210Bi-210Po radioactive disequilibria in gaseous emanations from the volcano. These new results [(210Po/210Pb) = 42 and (210Bi/210Pb) = 7.5] are in fair agreement with those previously reported. Previously published degassing models fail to explain satisfactorily measured activity ratios. We present here a new degassing model, which accounts for 222Rn enrichment in volcanic gases and its subsequent decay into 210Pb within gas bubbles en route to the surface. Theoretical short-lived radioactive disequilibria in volcanic gases predicted by this new model differ from those produced by the former models and better match the values we measured in the plume during the 2015 campaign. A Monte Carlo-like simulation based on variable parameters characterising the degassing process (magma residence time in the degassing reservoir, gas transfer time, Rn-Pb-Bi-Po volatilities, magma volatile content) suggests that short-lived disequilibria in volcanic gases may be of use to infer both magma dynamics and degassing kinetics beneath Mount Etna, and in general at basaltic volcanoes. However, this simulation emphasizes the need for accurately determined input parameters in order to produce unambiguous results, allowing sharp characterisation of degassing processes.430 83 - Some of the metrics are blocked by yourconsent settings
Item type:Publication, Access status: Restricted , Near-source high-rate GPS, strong motion and InSAR observations to image the 2015 Lefkada (Greece) Earthquake rupture history
The 2015/11/17 Lefkada (Greece) earthquake ruptured a segment of the Cephalonia Transform Fault (CTF) where probably the penultimate major event was in 1948. Using near-source strong motion and high sampling rate GPS data and Sentinel-1A SAR images on two tracks, we performed the inversion for the geometry, slip distribution and rupture history of the causative fault with a three-step self-consistent procedure, in which every step provided input parameters for the next one. Our preferred model results in a ~70° ESE-dipping and ~13° N-striking fault plane, with a strike-slip mechanism (rake ~169°) in agreement with the CTF tectonic regime. This model shows a bilateral propagation spanning ~9 s with the activation of three main slip patches, characterized by rise time and peak slip velocity in the ranges 2.5-3.5 s and 1.4-2.4 m/s, respectively, corresponding to 1.2-1.8 m of slip which is mainly concentrated in the shallower (<10 km) southern half of the causative fault. The inferred slip distribution and the resulting seismic moment (M0 = 1.05 × 1019N m) suggest a magnitude of Mw6.6. Our best solution suggests that the occurrence of large (Mw > 6) earthquakes to the northern and to the southern boundaries of the 2015 causative fault cannot be excluded.531 5
