Valkaniotis, Sotiris
Preferred name
Valkaniotis, Sotiris
Main Affiliation
ORCID
8 results
The search returned 8 results
Now showing 1 - 8 of 8
- Some of the metrics are blocked by yourconsent settings
Item type:Publication, Access status: Open Access , The 2 December 2020 MW 4.6, Kallithea (Viotia), central Greece earthquake: a very shallow damaging rupture detected by InSAR and its role in strain accommodation by neotectonic normal faults
On 2 December 2020 10:54 UTC a shallow earthquake of MW (NOA) = 4.6 occurred near the village of Kallithea (to the east of Thiva), central Greece, which, despite its modest size, was locally damaging. Using InSAR and GNSS data, we mapped a permanent change on the ground surface, i.e., a subsidence of 7 cm. Our geodetic inversion modelling indicates that the rupture occurred on a WNW–ESE striking, SSW-dipping normal fault, with a dip-angle of ~ 54°. The maximum slip value was 0.35 m, which was reached at a depth of about 1100 m. The analysis of broadband seismological data also provided kinematic source parameters such as moment magnitude MW = 4.6 (± 0.1), rupture area 6.3 km2 and mean slip 0.16 m, which agree with the values obtained from the geodetic model. The effects of the earthquake were disproportionate to its moderate magnitude, probably due to its unusually shallow depth (slip centroid at 1.1 km) and the high efficiency of the earthquake (radiation efficiency = 0.62). The geodetic data inversion also indicates that within the uncertainty limits of the technique, three scenarios are possible (a) the earthquake responsible for the mapped surface deformation may have occurred on a ~ 2-km long, blind normal fault different from the well-known active Kallithea normal fault or (b) could have occurred along a secondary fault that branches off the Kallithea fault or (c) it may have occurred along the Kallithea fault itself, but with its geometrical configuration could not be modelled with available data. We have also concluded that with a high dip-angle Kallithea Fault forward model it is not possible to fit the geodetic data. The rupture initiated at a very shallow depth (1.1 km) and it could not propagate deeper possibly because of a structural barrier down-dip. The 2020 event near Kallithea highlighted the structural complexity in this region of the Asopos Rift valley as the reactivation of the WNW–ESE structures indicates their significant role in strain accommodation and that they still represent a seismic hazard for this region.46 110 - Some of the metrics are blocked by yourconsent settings
Item type:Publication, Access status: Open Access , 28th September 2018 Mw 7.5 Sulawesi Supershear Earthquake, Indonesia: Ground effects and macroseismic intensity estimation using ESI-2007 scale
The 28th September 2018 Sulawesi Supershear earthquake (MW 7.5) was one of the deadliest earthquakes in the recent history of Indonesia causing ∼4000 causalities. The earthquake caused a ∼ 177 km long surface rupture along the Palu-Karo fault. Apart from surface rupture, the earthquake caused extensive earthquake environmental effects (EEEs) around the Palu-Donggala area of Central Sulawesi, Indonesia, which includes tsunami, coastal landslide, liquefaction, ground cracks and more than 7300 landslides in hilly areas. Initial post-event analysis and reports assigned a Modified Mercalli Intensity (MMI) of VII to VIII in Palu City and the surrounding area. Building damage and ground effects caused by the earthquake suggested that seismic intensity was understated. Here we applied the EEEs information from field survey data, published reports, and remote sensing tools to determine macroseismic intensity using the Environmental Seismic Intensity (ESI-07) Scale. The ESI-07 intensity derived from the ground effects suggests the maximum intensity of X-XI, which is 3–4° higher than the traditional intensity estimated by the United States Geological Survey (USGS) and the Indonesian Agency for Meteorology, Climatology, and Geophysics (BMKG). ShakeMaps were generated considering the ESI-07 values. The ShakeMap was compared with the instrumentally derived ShakeMap for the Palu earthquake, which proves that the ShakeMap prepared from the instrumental data or structural damage data is underrated. We argue that proper documentation of the EEEs is necessary for such damaging earthquakes for future earthquake hazard mapping and planning in the study area and other earthquakes in Indonesia. In addition, this will help in defining the on-fault and off-fault damage zone towards reducing the seismic risk of the Palu Donggala area.64 242 - Some of the metrics are blocked by yourconsent settings
Item type:Publication, Access status: Open Access , Environmental effects and seismogenic source characterization of the December 2020 earthquake sequence near Petrinja, Croatia
(2022-03-26); ; ; ; On 29 December 2020, a shallow earthquake of magnitude Mw 6.4 struck northern Croatia, near the town of Petrinja, more than 24 hours after a strong foreshock (Ml 5). We formed a reconnaissance team of European geologists and engineers, from Croatia, Slovenia, France, Italy and Greece, rapidly deployed in the field to map the evidence of coseismic environmental effects. In the epicentral area, we recognized surface deformation, such as tectonic breaks along the earthquake source at the surface, liquefaction features (scattered in the fluvial plains of Kupa, Glina and Sava rivers), and slope failures, both caused by strong motion. Thanks to this concerted, collective and meticulous work, we were able to document and map a clear and unambiguous coseismic surface rupture associated with the main shock. The surface rupture appears discontinuous, consisting of multi-kilometer en échelon right stepping sections, along a NW-SE striking fault that we call the Petrinja-Pokupsko Fault (PPKF). The observed deformation features, in terms of kinematics and trace alignments, are consistent with slip on a right lateral fault, in agreement with the focal solution of the main shock. We found mole tracks, displacement on faults affecting natural features (e. g. drainage channels), scarplets, and more frequently breaks of anthropogenic markers (roads, fences). The surface rupture is observed over a length of ∼13 km from end-to-end, with a maximum displacement of 38 cm, and an average displacement of ∼10 cm. Moreover, the liquefaction extends over an area of nearly 600 km² around the epicenter. Typology of liquefaction features include sand blows, lateral spreading phenomenon along the road and river embankments, as well as sand ejecta of different grain size and matrix. Development of large and long fissures along the fluvial landforms, current or ancient, with massive ejections of sediments is pervasive. These features are sometimes accompanied by small horizontal displacements. Finally, the environmental effects of the earthquake appear to be reasonably consistent with the usual scaling relationships, in particular the surface faulting. This rupture of the ground occurred on or near traces of a fault that shows clear evidence of Quaternary activity. Further and detailed studies will be carried out to characterize this source and related faults in terms of future large earthquakes potential, for their integration into seismic hazard models.566 422 - Some of the metrics are blocked by yourconsent settings
Item type:Publication, Access status: Open Access , Surface faulting during the 29 December 2020 Mw 6.4 Petrinja earthquake (Croatia)
(2021-04-19); ; ; ; The 29 December 2020, Mw 6.4 Petrinja earthquake nucleated at a depth of ~10 km in the Sisak-Moslavina County in northern Croatia, ~6 km WSW of the Petrinja town. Focal mechanisms, aftershocks distribution, and preliminary Sentinel-1 InSAR interferogram suggest that the NW-SE right-lateral strike-slip Pokupsko-Petrinja fault was the source of this event. The Croatian Geological Survey, joined by a European team of earthquake geologists from France, Slovenia and Italy, performed a prompt systematic survey of the area to map the surface effects of the earthquake. The field survey was guided by geological maps, preliminary morphotectonic mapping based on 1:5,000 topographical maps and InSAR interferogram. Locally, field mapping was aided by drone survey. We mapped unambiguous evidence of surface faulting at several sites between Župić to the NW and Hrastovica to the SE, in the central part of the Pokupsko-Petrinja fault, for a total length of ~6.5 km. This is probably a minimum length since several portions of the fault have not been explored yet, and in part crossing forbidden uncleared minefields. Surface faulting was observed on anthropic features (roads, walls) and on Quaternary sediments (soft colluvium and alluvium) and Miocene bedrock (calcarenites). The observed ruptures strike mostly NW-SE, with evidences of strike-slip right-lateral displacement and zones of extension (opening) or contraction (small pressure ridges, moletracks) at local bends of the rupture trace. Those ruptures are interpreted as evidences of coseismic surface faulting (primary effects) as they affect the morphology independently from the slope direction. Ground failures due to gravitational sliding and liquefaction occurrences were also observed, mapped and interpreted as secondary effects (see Amoroso et al., and Vukovski et al., this session). SE of Križ, the rupture broke a water pipeline with a right-lateral offset of several centimetres. Measured right-lateral net displacement varies from a few centimetres up to ~35 cm. A portion of the maximum measured displacement could be due to afterlisp, as it was mapped several days after the main shock. Hybrid surface ruptures (shear plus opening and liquefaction), striking SW-NE, with cm-size left-lateral strike-slip offsets were mapped on the northern side of the Petrinja town, ~3 km NE of the main fault. Overall, the rupture zone appears discontinuous. Several factors might be inferred to explain this pattern such as incomplete mapping of the rupture, inherited structural discontinuities within the Pokupsko-Petrinja fault system, or specific mechanical properties of the Neogene-Quaternary strata72 102 - Some of the metrics are blocked by yourconsent settings
Item type:Publication, Access status: Open Access , 181 150 - Some of the metrics are blocked by yourconsent settings
Item type:Publication, Access status: Open Access , Ground Deformation and Seismic Fault Model of the M6.4 Durres (Albania) Nov. 26, 2019 Earthquake, based on GNSS/INSAR Observations
We identify the source of the Mw = 6.4 earthquake that rocked north-central Albania on November 26, 2019 02:54 UTC. We use synthetic aperture radar interferograms tied to the time series of coordinates of two permanent Global Navigation Satellite System (GNSS) stations (DUR2 and TIR2). We model the source by inverting the displacement data. Assuming in our model a half-space elastic medium and uniform slip along a rectangular fault surface, we invert the 104 picked measurements on a couple of ascending and descending interferograms to calculate the parameters of the fault. All inversions made with di erent input parameters converge towards a stable and robust solution with root mean square (r.m.s.) residual of 5.4 mm, thus ~1/5 of a fringe. They reveal that the earthquake occurred deep in the crust on a low-angle fault (23 ) dipping towards east with a centroid at 16.5 km depth. The best-fitting length and width of the fault are 22 and 13 km, and the reverse slip, 0.55 m. The seismic moment deduced from our model agrees with those of the published seismic moment tensors. This geometry is compatible with a blind thrust fault that may root on the main basal thrust, i.e., along the thrust front that separates Adria–Apulia from Eurasia. It is notable that there is a 123 ns yr-1 active shortening of the crust between the GNSS stations DUR2-TIR2 (equivalent to a shortening rate of 3.6 mm yr-1), and roughly in the east–west direction. Given this amount of strain the recurrence time of M6+ earthquakes along this fault should be of the order of 150 years.188 122 - Some of the metrics are blocked by yourconsent settings
Item type:Publication, Access status: Open Access , Coincident locations of rupture nucleation during the 2019 Le Teil earthquake, France and maximum stress change from local cement quarrying
Earthquake occurrence is ultimately controlled by tectonic stress load. Nevertheless, the 2019, Mw = 4.9, Le Teil earthquake in southern France occurred in an area where strain rates are relatively low. Human operations can produce increases in stress load and degradation of strength on nearby active faults, which raises the potential for failure. Here we present estimates of the rupture geometry and source directivity of the Le Teil earthquake based on differential synthetic aperture radar interferometry and seismic data. We find that almost two centuries of mass removal at a nearby cement quarry likely provided the required stress change to either induce the Le Teil earthquake, or hasten its occurrence by more than 100,000 years. We suggest that further mass removal in the area might lead to even stronger earthquakes, by activating deeper sectors of the same fault plane.225 231 - Some of the metrics are blocked by yourconsent settings
Item type:Publication, Access status: Restricted , Coseismic deformation, field observations and seismic fault of the 17 November 2015M=6.5, Lefkada Island, Greece earthquake
On November 17, 2015 07:10:07 UTC a strong, shallow Mw6.5 earthquake, occurred on the island of Lefkada along a strike-slip fault with right-lateral sense of slip. The event triggered widespread environmental effects at the south and western part of the island while, the intensity and severity of these earthquake-induced deformations is substantially decreased towards the eastern part of the island. Relocation of seismicity and inversion of geophysical (GPS, InSAR) data indicate that the seismic fault runs parallel to the west coast of Lefkada, along the Aegean – Apulia plate boundary. The fault plane strikes N20 ± 5°E and dips to east with an angle of about 70 ± 5°. Coseismic deformation was measured in the order of tens of centimeters of horizontal motion by continuous GPS stations of NOANET (the NOA GPS network) and by InSAR (Sentinel 1 A image pairs). A coseismic uniform-slip model was produced from inversion of InSAR data and permanent GPS stations. The earthquake measured Mw = 6.5 using both the geodetic moment produced by the slip model, as well as the PGD relation of Melgar et al. (2015, GRL). In the field we observed no significant vertical motion of the shoreline or surface expression of faulting, this is consistent with the predictions of the model. The interferograms show a large decorrelation area that extends almost along all the western coast of Lefkada. This area correlates well with the mapped landslides. The 2003–2015 pattern of seismicity in the Ionian Sea region indicates the existence of a 15-km seismic gap offshore NW Cephalonia.277 3
