Skip to main content
The search returned 36 results
Now showing 1 - 10 of 36
  • Some of the metrics are blocked by your 
    Item type:Publication, Access status: Restricted ,

    The AlpArray Seismic Network: A Large-Scale European Experiment to Image the Alpine Orogen

    The AlpArray programme is a multinational, European consortium to advance our understanding of orogenesis and its relationship to mantle dynamics, plate reorganizations, surface processes and seismic hazard in the Alps–Apennines–Carpathians–Dinarides orogenic system. The AlpArray Seismic Network has been deployed with contributions from 36 institutions from 11 countries to map physical properties of the lithosphere and asthenosphere in 3D and thus to obtain new, high-resolution geophysical images of structures from the surface down to the base of the mantle transition zone. With over 600 broadband stations operated for 2 years, this seismic experiment is one of the largest simultaneously operated seismological networks in the academic domain, employing hexagonal coverage with station spacing at less than 52 km. This dense and regularly spaced experiment is made possible by the coordinated coeval deployment of temporary stations from numerous national pools, including ocean-bottom seismometers, which were funded by different national agencies. They combine with permanent networks, which also required the cooperation of many different operators. Together these stations ultimately fill coverage gaps. Following a short overview of previous large-scale seismological experiments in the Alpine region, we here present the goals, construction, deployment, characteristics and data management of the AlpArray Seismic Network, which will provide data that is expected to be unprecedented in quality to image the complex Alpine mountains at depth.
      1243  4
  • Some of the metrics are blocked by your 
    Item type:Publication, Access status: Open Access ,

    Aseismic transient driving the swarm-like seismic sequence in the Pollino range, Southern Italy

    ectonic earthquake swarms challenge our understanding of earthquake processes since it is difficult to link observations to the underlying physical mechanisms and to assess the hazard they pose. Transient forcing is thought to initiate and drive the spatio-temporal release of energy during swarms. The nature of the transient forcing may vary across sequences and range from aseismic creeping or transient slip to diffusion of pore pressure pulses to fluid redistribution and migration within the seismogenic crust. Distinguishing between such forcing mechanisms may be critical to reduce epistemic uncertainties in the assessment of hazard due to seismic swarms, because it can provide information on the frequency–magnitude distribution of the earthquakes (often deviating from the assumed Gutenberg–Richter relation) and on the expected source parameters influencing the ground motion (for example the stress drop). Here we study the ongoing Pollino range (Southern Italy) seismic swarm, a long-lasting seismic sequence with more than five thousand events recorded and located since October 2010. The two largest shocks (magnitude M w = 4.2 and M w = 5.1) are among the largest earthquakes ever recorded in an area which represents a seismic gap in the Italian historical earthquake catalogue. We investigate the geometrical, mechanical and statistical characteristics of the largest earthquakes and of the entire swarm. We calculate the focal mechanisms of the M l > 3 events in the sequence and the transfer of Coulomb stress on nearby known faults and analyse the statistics of the earthquake catalogue. We find that only 25 per cent of the earthquakes in the sequence can be explained as aftershocks, and the remaining 75 per cent may be attributed to a transient forcing. The b-values change in time throughout the sequence, with low b-values correlated with the period of highest rate of activity and with the occurrence of the largest shock. In the light of recent studies on the palaeoseismic and historical activity in the Pollino area, we identify two scenarios consistent with the observations and our analysis: This and past seismic swarms may have been ‘passive’ features, with small fault patches failing on largely locked faults, or may have been accompanied by an ‘active’, largely aseismic, release of a large portion of the accumulated tectonic strain. Those scenarios have very different implications for the seismic hazard of the area.
      271  125
  • Some of the metrics are blocked by your 
    Item type:Publication, Access status: Open Access ,

    Testing the "PRESTo" Early Warning Algorithm in North-Eastern Italy, Austria and Slovenia: update analysis

    Since 2002 OGS (Istituto Nazionale di Oceanografia e di Geofisica Sperimentale) in Udine (Italy), the Agencija Republike Slovenije za Okolje (ARSO) in Ljubljana (Slovenia) and the Zentralanstalt für Meteorologie und Geodynamik (ZAMG) in Vienna (Austria), are collecting, analyzing, archiving and exchanging seismic data in real time. The data exchange has proved to be effective and very useful in case of seismic events at the borders between Italy, Austria and Slovenia, where the poor coverage of individual national seismic networks precluded a precise earthquake location, while the usage of common data from the integrated networks improves significantly the overall capability of real time event detection and rapid characterization in this area. In order to extend the seismic monitoring in North-eastern Italy, Slovenia and Southern Austria, towards earthquake early warning applications, at the end of 2013 OGS, ARSO and ZAMG teamed with the RISSCLab group (http://www.rissclab.unina.it) of the Department of Physics at the University of Naples Federico II in Italy. The collaboration focuses on massive testing on OGS, ARSO and ZAMG data of the EW platform PRESTo (Probabilistic and Evolutionary early warning SysTem) developed by RISSC-Lab (http://www.prestoews.org).
      342  354
  • Some of the metrics are blocked by your 
    Item type:Publication, Access status: Restricted ,

    Microzonation of Potenza (Southern Italy) in terms of spectral intensity ratio using joint analysis of earthquakes and ambient noise.

    A temporary seismic network composed of 11 stations was installed in the city of Potenza (Southern Italy) to record local and regional seismicity within the context of a national project funded by the Italian Department of Civil Protection (DPC). Some stations were moved after a certain time in order to increase the number of measurement points, leading to a total of 14 sites within the city by the end of the experiment. Recordings from 26 local earthquakes (Ml 2.2−3.8 ) were analyzed to compute the site responses at the 14 sites by applying both reference and non-reference site techniques. Furthermore, the Spectral Intensity (SI) for each local earthquake, as well as their ratios with respect to the values obtained at a reference site, were also calculated. In addition, a field survey of 233 single station noise measurements within the city was carried out to increase the information available at localities different from the 14 monitoring sites. By using the results of the correlation analysis between the horizontal-to-vertical spectral ratios computed from noise recordings (NHV) at the 14 selected sites and those derived by the single station noise measurements within the town as a proxy, the spectral intensity correction factors for site amplification obtained from earthquake analysis were extended to the entire city area. This procedure allowed us to provide a microzonation map of the urban area that can be directly used when calculating risk scenarios for civil defence purposes. The amplification factors estimated following this approach show values increasing along the main valley toward east where the detrital and alluvial complexes reach their maximum thickness.
      276  23
  • Some of the metrics are blocked by your 
    Item type:Publication, Access status: Restricted ,

    Site effect in Messina and Reggio Calabria Area using HVSR tecnique

    The Messina Strait is one of the most seismically active areas of the Southern Italy; in fact, since 1783, 7 earthquakes with M ranging between 6.0 and 7.2, are reported with extensive damages and induced coseismic environmental effects well described. The most remarkable phenomena were massive landslides (with consequent obstruction of the valleys), small lakes formation, watercourses deviation, slumps, soil fracturing and liquefaction; in the urban area many of the coesismic effects were without doubt due to the settlement of loose sediments and artificial filling (e.g., Messina and Reggio Calabria dock areas). The aim of this work is to understand whether the site effect (generated by resonance phenomena in the upper sediments layers) could affect, at least partially, the distribution of urban damage after the 1908 earthquake. In fact the existence of detailed damage information for this earthquake, collected by one of the most relevant seismologist of that time (BARATTA, 1910), provides the opportunity of making a comparison between observed damage and the natural frequency of the foundation soil. For this purpose a geophysical survey was carried out in the two main cities of the Straits, and the HVSR method was adopted to identify areas subject to amplification effects and delineate the geometry of sedimentary bodies. The microtremor HVSR method (originally proposed by NOGOSHI AND IGARASHI (1970) and later diffused by NAKAMURA (1989) widely used for site effect study provides a direct estimate of the resonance frequencies of sedimentary cover, which tend to amplify soil motion in the case of earthquake.
      224  48
  • Some of the metrics are blocked by your 
    Item type:Publication, Access status: Restricted ,

    Building damage scenarios based on exploitation of Housner intensity derived from finite faults ground motion simulations

    In this paper earthquake damage scenarios for residential buildings (about 4200 units) in Potenza (Southern Italy) have been estimated adopting a novel probabilistic approach that involves complex source models, site effects, building vulnerability assessment and damage estimation through Damage Probability Matrices. Several causative faults of single seismic events, with magnitude up to 7, are known to be close to the town. A seismic hazard approach based on finite faults ground motion simulation techniques has been used to identify the sources producing the maximum expected ground motion at Potenza and to generate a set of ground motion time histories to be adopted for building damage scenarios. Additionally, site effects, evaluated in a previouswork through amplification factors of Housner intensity, have been combined with the bedrock values provided by hazard assessment. Furthermore, a new relationship between Housner and EMS-98 macroseismic intensity has been developed. This relationship has been used to convert the probability mass functions of Housner intensity obtained from synthetic seismograms amplified by the site effects coefficients into probability mass function of EMS-98 intensity. Finally, the Damage Probability Matrices have been applied to estimate the damage levels of the residential buildings located in the urban area of Potenza. The proposed methodology returns the full probabilistic distribution of expected damage, thus avoiding average damage index or uncertainties expressed in term of dispersion indexes.
      245  23
  • Some of the metrics are blocked by your 
    Item type:Publication, Access status: Restricted ,

    Separation of source and site effects by Generalized Inversion Technique using the aftershock recordings of the 2009 L'Aquila earthquake

    We exploit S-wave spectral amplitudes from 112 aftershocks (3.0 ≤ ML ≤ 5.3) of the L’Aquila 2009 seismic sequence recorded at 23 temporary stations in the epicentral area to estimate the source parameters of these events, the seismic attenuation characteristics and the site amplification effects at the recording sites. The spectral attenuation curves exhibit a very fast decay in the first few kilometers that could be attributed to the large attenuation of waves traveling trough the highly heterogeneous and fractured crust in the fault zone of the L’Aquila mainshock. The S-waves total attenuation in the first 30 km can be parameterized by a quality factor QS(f) = 23f^0.58 obtained by fixing the geometrical spreading to 1/R. The source spectra can be satisfactorily modeled using the omega-square model that provides stress drops between 0.3 and 60 MPa with a mean value of 3.3±2.8 MPa. The site responses show a large variability over the study area and significant amplification peaks are visible in the frequency range from 1 to more than 10 Hz. Finally, the vertical component of the motion is amplified at a number of sites where, as a consequence, the horizontal-to-vertical spectral ratios (HVSR) method fails in detecting the amplitude levels and in few cases the resonance frequencies.
      156  23
  • Some of the metrics are blocked by your 
    Item type:Publication, Access status: Open Access ,

    Frequency variation in site response as observed from strong motion data of the L’Aquila (2009) seismic sequence

    Previous works based mainly on strong-motion recordings of large Japanese earthquakes showed that site amplification and soil fundamental frequency could vary over long and short time scales. These phenomena were attributed to non-linear soil behaviour: the starting fundamental frequency and amplification were both instantaneously decreasing and then recovering for a time varying from few seconds to several months. The recent April 6, 2009 earthquake (M W 6.3), occurred in the L’Aquila district (central Italy), gave us the possibility to test hypotheses on time variation of amplification function and soil fundamental frequency, thanks to the recordings provided by a pre-existing strong-motion array and by a large number of temporary stations. We investigated the intra- and inter-event soil frequency variations through different spectral analyses, including time-frequency spectral ratios and S-Transform (Stockwell et al. in IEEE Trans Signal Process 44:998–1001, 1996). Finally, analyses on noise recordings were performed, in order to study the soil behaviour in linear conditions. The results provided puzzling evidences. Concerning the long time scale, little variation was observed at the permanent stations of the Aterno Valley array. As for the short time-scale variation, the evidence was often contrasting, with some station showing a time-varying behavior, while others did not change their frequency with respect to the one evaluated from noise measurements. Even when a time-varying fundamental frequency was observed, it was difficult to attribute it to a classical, softening non-linear behaviour. Even for the strongest recorded shocks, with peak ground acceleration reaching 0.7 g, variations in frequency and amplitude seems not relevant from building design standpoint. The only exception seems to be the site named AQV, where the analyses evidence a fundamental frequency of the soil shifting from 3 Hz to about 1.5 Hz during the mainshock.
      178  1074
  • Some of the metrics are blocked by your 
    Item type:Publication, Access status: Open Access ,

    Rapid response seismic networks in Europe: the lesson learned from L’Aquila earthquake emergency.

    The largest dataset ever recorded during a normal fault seismic sequence was acquired during the 2009 seismic emergency triggered by the damaging earthquake in L'Aquila (Italy). This was possible through the coordination of different rapid-response seismic networks in Italy, France and Germany. A seismic network of more than 60 stations recorded up to 70,000 earthquakes. Here, we describe the different open-data archives where it is possible to find this unique set of data for studies related to hazard, seismotectonics and earthquake physics. Moreover, we briefly describe some immediate and direct applications of emergency seismic networks. At the same time, we note the absence of communication platforms between the different European networks. Rapid-response networks need to agree on common strategies for network operations. Hopefully, over the next few years, the European Rapid-Response Seismic Network will became a reality.
      1026  250
  • Some of the metrics are blocked by your 
    Item type:Publication, Access status: Open Access ,

    Evaluation of site effects in the Aterno river valley (Central Italy) from aftershocks of the 2009 L'Aquila earthquake

    A temporary network of 33 seismic stations was deployed in the area struck by the 6th April 2009, Mw 6.3, L’Aquila earthquake (central Italy), with the aim to investigate the site amplification within the Aterno river Valley. The seismograms of 18 earthquakes recorded by 14 of the 33 stations were used to evaluate the average horizontal to vertical spectral ratio (HVSR) for each site and the standard horizontal spectral ratio (SSR) between a site and a reference station. The obtained results have been compared to the geological and geophysical information in order to explain the resonance frequencies and the amplification levels with respect to surface geology of the valley. The result indicate that there is no uniform pattern of amplification, due to the complex geologic setting, as the thickness and degree of cementation of the deposits is highly variable. As consequence, a large number of the local site response is observed, therefore it is very difficult to elaborate a unique model that can explain such a variability of the amplification.
      1260  1051