Capello, Marco
Preferred name
Capello, Marco
Email
marco.capello@ingv.it
Staff
staff
ORCID
55 results
Filters
Settings
The search returned 55 results
Now showing 1 - 10 of 55
- Some of the metrics are blocked by yourconsent settings
Item type:Publication, Access status: Open Access , The seismic network of Ischia island from 1993 to 2021
(Geological Society of London, 2024); ; ; ; The volcanic island of Ischia has shown to have an important seismogenic potential, being the location of several destructive earthquakes, e.g. 1881, 1883 and 2017. The damage caused by these earthquakes was more connected to the proximity of the source to the surface than to their magnitude (Mw < 5.2). The need to monitor and model this seismicity required the installation of a dense and modern seismic network. The first modern seismic station on the island was installed in 1993, and the network was successively increased with time. A meaningful improvement to the network was made after the earthquake that occurred on the 21 of August 2017. The network currently has 11 sites with velocimeters and some of them with accelerometers installed too. We analysed the seismic network configuration in comparison with the seismicity that characterizes the area to mark a starting point for future seismological analysis. The network is currently able to locate shallow earthquakes with duration magnitude greater or equal to 0 in the whole island.53 87 - Some of the metrics are blocked by yourconsent settings
Item type:Publication, Access status: Open Access , Progettazione e realizzazione di infrastrutture a basso costo per stazioni sismiche semi-permanenti
(2023-02-14); ; ; ; This report describes the state of the art of the installation techniques for seismic stations developed by the Seismology Group and the Seismology Laboratory at the INGV branch in Pisa, with examples of applications taken from long‐duration field experiments carried out in different areas of Tuscany, such as Monte Amiata and the Mugello basin. Our goal was to develop a low‐cost infrastructure, portable and easily adaptable to different terrains, suitable for hosting a variety of real‐time seismic stations. In addition to improving the structural resistance of the deployment, we also developed applications for the remote monitoring of the state of health of the seismic stations, which allowed a more efficient maintenance of the instrumentation. The proposed type of installation has proved to be sufficiently robust and suitable for installations with a temporal duration of a few years, and in agreement with the expected targets, as proved by the analyses carried out during and at the end of the experiments in which they were used.582 384 - Some of the metrics are blocked by yourconsent settings
Item type:Publication, Access status: Open Access , A temporary network for monitoring seismicity in the Mugello basin (Northern Apennines, Italy)
Within the geodynamic context of the Northern Apennines (Italy), one of the most relevant seismogenic areas is the Mugello basin (NorthEastern Tuscany). The area has a welldocumented record of seismicity; the two major historical earthquakes occurred in 1542 (Mw=6.0) and in 1919 (Mw=6.4). The proximity of the Mugello Basin to densely urbanized areas and the potential impact of strong earthquakes on the cultural heritage in the nearby (~30km) city of Florence makes a better knowledge of the seismicity in that area an important target. Following this argument, by mid2019 we deployed 9 temporary stations within and around the Mugello basin, complementing the permanent monitoring networks currently operating in the area. This report describes the details of the temporary network deployment and shows sample recordings and locations from a Mw=4.5 earthquake which struck the NW margin of the basin on Dec. 9, 2019.464 111 - Some of the metrics are blocked by yourconsent settings
Item type:Publication, Access status: Open Access , Shear wave splitting in the Alpine region
(2021-12); ; ; ; To constrain seismic anisotropy under and around the Alps in Europe, we study SKS shear wave splitting from the region densely covered by the AlpArray seismic network. We apply a technique based on measuring the splitting intensity, constraining well both the fast orientation and the splitting delay. Four years of teleseismic earthquake data were processed, from 723 temporary and permanent broad-band stations of the AlpArray deployment including ocean-bottom seismometers, providing a spatial coverage that is unprecedented. The technique is applied automatically (without human intervention), and it thus provides a reproducible image of anisotropic structure in and around the Alpine region. As in earlier studies, we observe a coherent rotation of fast axes in the western part of the Alpine chain, and a region of homogeneous fast orientation in the Central Alps. The spatial variation of splitting delay times is particularly interesting though. On one hand, there is a clear positive correlation with Alpine topography, suggesting that part of the seismic anisotropy (deformation) is caused by the Alpine orogeny. On the other hand, anisotropic strength around the mountain chain shows a distinct contrast between the Western and Eastern Alps. This difference is best explained by the more active mantle flow around the Western Alps. The new observational constraints, especially the splitting delay, provide new information on Alpine geodynamics. © 2021 The Author(s) 2021. Published by Oxford University Press on behalf of The Royal Astronomical Society.1638 209 - Some of the metrics are blocked by yourconsent settings
Item type:Publication, Access status: Open Access , Studiare i terremoti con un sismografo didattico
(2021-02-02); ; ; ; Il progetto di ASL “Studiare i terremoti con un sismografo didattico” ha come obiettivo la sensibilizzazione degli studenti sui temi della pericolosità e del rischio sismico tramite un coinvolgimento attivo nello studio dei terremoti. I temi che riguardano la prevenzione del rischio sismico sono infatti solitamente trattati nelle scuole attraverso i canali tradizionali della divulgazione scientifica, ovvero tramite seminari e conferenze in cui gli studenti svolgono esclusivamente un ruolo passivo. Tuttavia numerosi studi sulla didattica delle materie scientifiche [Struyf et al., 2019; Anderson, 2007; Brush & Sye, 2000] evidenziano il contributo positivo delle attività pratiche nell’apprendimento delle 74 discipline STEM (Science Technology Engineering and Mathematics). Lo scopo principale di questo progetto è rendere gli studenti protagonisti di un processo cognitivo caratterizzato dall’esperienza diretta che rappresenta un modo efficace per consolidare l’apprendimento nel medio e lungo termine [Liu et al., 2011]. Il progetto si divide in due task principali: la costruzione di un sismometro orizzontale (garden gate) e la formazione di competenze informatiche e sismologiche per acquisire ed elaborare i segnali sismici. È stato concepito come progetto pilota di uno piú ampio e ambizioso per realizzare una rete sismometrica scolastica. Il progetto del sismometro, basato sull’utilizzo di piattaforme hardware e software open source, potrebbe infatti essere replicato con costi contenuti e installato in altre scuole del territorio regionale o nazionale. Il successo della sismologia in ambito scolastico è testimoniata dal diffondersi di esperienze analoghe che, negli ultimi anni, sono state condotte principalmente all’estero: ad esempio i progetti PEPP Princeton Earth Physics Project (USA) [Steinberg and Phinney, 2000], EduSeis The Educational Seismograph Project (Francia, Italia) [Cantore et al., 2005], O3E Observation de l’Environnement à but Éducatif pour l’École (Francia) [Aufeuvre et al., 2009], SAE Sismos à l’Ecole (Francia) [Courboulex et al., 2012], Seismology at School (Regno Unito) [Denton, 2008] e più recentemente AuSIS The Australian Seismometers in Schools (Australia) [Balfour et al., 2014]. Queste iniziative hanno evidenziato estremo entusiasmo da parte di docenti e studenti verso il monitoraggio sismico a carattere didattico anche in territori in cui l’attività sismica è molto sporadica. La scuola che ha aderito alla proposta è il Polo Scientifico Tecnico Professionale E. Fermi – G. Giorgi di Lucca che comprende sia Liceo Scientifico che Istituti Tecnici con indirizzi di meccanica, elettronica e informatica. Questa pluralità di indirizzi ha consentito di individuare studenti con le competenze necessarie alla realizzazione del progetto. Un gruppo ristretto di alunni selezionati tra le classi V degli Istituti tecnici ha curato la messa in opera del sismometro mentre gli studenti di una intera classe IV del Liceo scientifico hanno seguito lezioni per acquisire competenze sull’analisi del segnale sismico. Il progetto ha avuto un successo parziale. Il sismometro è stato progettato e realizzato in tutte le sue componenti e la scuola ha finanziato la costruzione di due copie del prototipo. Gli strumenti sono stati presentati in occasione della Notte Europea dei Ricercatori a Lucca nel Settembre 2019. Tuttavia l’installazione dei sismometri all’interno del plesso scolastico non è stata ancora completata. Il lavoro svolto con la classe del Liceo Scientifico è stato meno produttivo. Le principali motivazioni che hanno impedito di conseguire i risultati attesi sono: la scarsa motivazione degli studenti, le difficoltà tecniche incontrate per effettuare le lezioni di informatica per l’analisi dei segnali sismici, un numero insufficiente di ore per acquisire le competenze base di programmazione. Teniamo a precisare inoltre che, nel pieno dello spirito dei progetti “Alternanza Scuola Lavoro” e come coronamento del progetto, uno degli studenti che hanno preso parte alla progettazione del sismometro è risultato vincitore di un bando di selezione e quindi assunto come collaboratore tecnico a tempo determinato presso la Sezione di Pisa dell’INGV.151 80 - Some of the metrics are blocked by yourconsent settings
Item type:Publication, Access status: Open Access , Characterization of the Sos Enattos site for the Einstein Telescope
In this work we report the ongoing characterization of the Sos Enattos former mine (Sardinia, Italy), one of the two candidate sites for the Einstein Telescope (ET), the European third-generation underground interferometric detector of Gravitational Waves. The Sos Enattos site lies on a crystalline basement, made of rocks with good geomechanical properties, characterized by negligible groundwater. In addition, the site has a very low seismic background noise due to the absence of active tectonics involving Sardinia. Finally, the area has a low population density, resulting in a reduced anthropic noise even at the ground level. This location was already studied in 2012-2014 as a promising site for an underground detector. More recently, in March 2019, we deployed a new network of surface and underground seismometers at the site, that is currently monitoring the local seismic noise. Most of the energy carried by the seismic waves is due to the microseisms below 1 Hz, showing a significant correlation with the waves of the west Mediterranean sea. Above 1 Hz the seismic noise in the underground levels of the mine approaches the Peterson's low noise model. Exploiting mine blasting works into the former mine, we were also able to perform active seismic measurements to evaluate the seismic waves propagation across the area. In conclusion we also give a first assessment about the acoustic and magnetic noise in this underground site.936 165 - Some of the metrics are blocked by yourconsent settings
Item type:Publication, Access status: Restricted , Arrival angles of teleseismic fundamental mode Rayleigh waves across the the AlpArray
The dense AlpArray network allows studying seismic wave propagation with high spatial resolution. Here we introduce an array approach to measure arrival angles of teleseismic Rayleigh waves. The approach combines the advantages of phase correlation as in the two-station method with array beamforming to obtain the phase-velocity vector. 20 earthquakes from the first two years of the AlpArray project are selected, and spatial patterns of arrival-angle deviations across the AlpArray are shown in maps, depending on period and earthquake location. The cause of these intriguing spatial patterns is discussed. A simple wave-propagation modelling example using an isolated anomaly and a Gaussian beam solution suggests that much of the complexity can be explained as a result of wave interference after passing a structural anomaly along the wave paths. This indicates that arrival-angle information constitutes useful additional information on the Earth structure, beyond what is currently used in inversions.3356 7 - Some of the metrics are blocked by yourconsent settings
Item type:Publication, Access status: Open Access , AlpArray-Italy: Site description and noise characterization
(2017-03-13); ; ; ; Within the framework of the European collaborative research initiative AlpArray (http://www.alparray.ethz. ch), the Istituto Nazionale di Geofisica e Vulcanolgia (INGV) deployed overall 20 broad-band seismic stations in Northern Italy and on two islands in the Tyrrhenian Sea (Capraia and Montecristo) during Fall-Winter 2015. The temporary deployment (16 stations) will run for two to three years and 4 INGV National Seismic Network accelerometric sites are now equipped with additional per- manent broad-band sensors. The 16 temporary stations are equipped with REF TEK 130 digitizers and Nanometrics Trillium Compact 120 s sensors, a couple have Nanometrics Trillium 120P sensors and one a Streckeisen STS2. For each site we describe the settings and discuss the noise levels, the site effects and the preliminary sensitivity analysis.2636 97 - Some of the metrics are blocked by yourconsent settings
Item type:Publication, Access status: Open Access , Emergenza sismica nel centro Italia 2016-2017. Secondo rapporto del gruppo operativo SISMIKO. Sviluppo e mantenimento della rete sismica mobile a seguito del terremoto di Amatrice Mw 6.0 (24 agosto 2016, Italia centrale)
(2017-01-15); ; ; ; La rete sismica temporanea installata dal gruppo operativo INGV SISMIKO a seguito del terremoto del 24 agosto 2016 tra i Monti della Laga e la Valnerina, è stata ampliata nel settore settentrionale a seguito dei forti terremoti avvenuti alla fine del mese di ottobre 2016. Successivamente alle due scosse di Mw 5.4 e 5.9 che il 26 ottobre hanno interessato l’area al confine Marche-Umbria tra i Comuni di Castelsantangelo sul Nera (MC), Norcia (PG) e Arquata del Tronto (AP), la geometria della rete è stata estesa di circa 25 km verso nord con l’attivazione di ulteriori tre stazioni temporanee di cui una, da subito, disposta per la trasmissione dei dati in tempo reale e per l’inserimento nel sistema di sorveglianza sismica dell’Istituto Nazionale di Geofisica e Vulcanologia (INGV). Un’ultima stazione è stata inoltre installata nei pressi di Campello del Clitunno in provincia di Perugia ad ovest della sequenza, a seguito del terremoto Mw 6.5 che la mattina del 30 ottobre ha interessato l’intera area già fortemente provata dalla sequenza in corso; questo è stato il più forte terremoto registrato negli ultimi 30 in Italia. A circa 5 mesi dall’inizio dell’emergenza sismica, la rete temporanea conta quindi 23 stazioni che da metà dicembre sono tutte trasmesse in tempo reale ai diversi centri di acquisizione INGV, ovvero Milano, Ancona e Grottaminarda ma soprattutto Roma dove i dati vengono contestualmente archiviati nell’European Integrated Data Archive (EIDA) e integrati nel sistema di monitoraggio e sorveglianza sismica dell’INGV; per la sorveglianza sono incluse solo parte delle stazioni. Nelle ultime settimane, le attività di campagna del gruppo operativo SISMIKO sono state costantemente focalizzate alla cura e alla manutenzione della strumentazione per garantire la continuità della trasmissione e dell’acquisizione dei dati, a volte compromesse da malfunzionamenti legati al maltempo. Alla data di aggiornamento del presente report, non è ancora stata decretata una dismissione o una rimodulazione della geometria della rete sismica temporanea, anche in considerazione della attività sismica in corso a tutt’oggi molto sostenuta. Tutti i dati acquisiti dalle stazioni temporanee SISMIKO, sono distribuiti senza alcun vincolo, al pari dei dati della Rete Sismica Nazionale (RSN, codice di rete IV), ed utilizzati per prodotti scientifici in tempo reale (localizzazioni di sala, calcolo dei Time Domain Moment Tensor -TDMT delle ShakeMaps, ecc) e per l’aggiornamento dei database dell’INGV come l’Italian Seismological Instrumental and Parametric Database (ISIDe) con la revisione del Bollettino Sismico Italiano (BSI), dell’INGV Strong Motion Data (ISMD) e dell’ITalian ACcelerometric Archive (ITACA), dell’European-Mediterranean Regional Centroid Moment Tensors (RCMT) e nei lavori scientifici che utilizzano forme d’onda velocimetriche ed accelerometriche (ri- localizzazioni, studi della sorgente sismica ecc.).452 400 - Some of the metrics are blocked by yourconsent settings
Item type:Publication, Access status: Open Access , SISMIKO: emergency network deployment and data sharing for the 2016 central Italy seismic sequence
At 01:36 UTC (03:36 local time) on August 24th 2016, an earthquake Mw 6.0 struck an extensive sector of the central Apennines (coordinates: latitude 42.70° N, longitude 13.23° E, 8.0 km depth). The earthquake caused about 300 casualties and severe damage to the historical buildings and economic activity in an area located near the borders of the Umbria, Lazio, Abruzzo and Marche regions. The Istituto Nazionale di Geofisica e Vulcanologia (INGV) located in few minutes the hypocenter near Accumoli, a small town in the province of Rieti. In the hours after the quake, dozens of events were recorded by the National Seismic Network (Rete Sismica Nazionale, RSN) of the INGV, many of which had a ML > 3.0. The density and coverage of the RSN in the epicentral area meant the epicenter and magnitude of the main event and subsequent shocks that followed it in the early hours of the seismic sequence were well constrained. However, in order to better constrain the localizations of the aftershock hypocenters, especially the depths, a denser seismic monitoring network was needed. Just after the mainshock, SISMIKO, the coordinating body of the emergency seismic network at INGV, was activated in order to install a temporary seismic network integrated with the existing permanent network in the epicentral area. From August the 24th to the 30th, SISMIKO deployed eighteen seismic stations, generally six components (equipped with both velocimeter and accelerometer), with thirteen of the seismic station transmitting in real-time to the INGV seismic monitoring room in Rome. The design and geometry of the temporary network was decided in consolation with other groups who were deploying seismic stations in the region, namely EMERSITO (a group studying site-effects), and the emergency Italian strong motion network (RAN) managed by the National Civil Protection Department (DPC). Further 25 BB temporary seismic stations were deployed by colleagues of the British Geological Survey (BGS) and the School of Geosciences, University of Edinburgh in collaboration with INGV. All data acquired from SISMIKO stations, are quickly available at the European Integrated Data Archive (EIDA). The data acquired by the SISMIKO stations were included in the preliminary analysis that was performed by the Bollettino Sismico Italiano (BSI), the Centro Nazionale Terremoti (CNT) staff working in Ancona, and the INGV-MI, described below.5995 175
