Skip to main content
The search returned 5 results
Now showing 1 - 5 of 5
  • Some of the metrics are blocked by your 
    Item type:Publication, Access status: Open Access ,

    An ordered probit model for seismic intensity data

    Seismic intensity, measured through the Mercalli–Cancani–Sieberg (MCS) scale, provides an assessment of ground shaking level deduced from building damages, any natural environment changes and from any observed effects or feelings. Generally, moving away from the earthquake epicentre, the effects are lower but intensities may vary in space, as there could be areas that amplify or reduce the shaking depending on the earthquake source geometry, geological features and local factors. Currently, the Istituto Nazionale di Geofisica e Vulcanologia analyzes, for each seismic event, intensity data collected through the online macroseismic questionnaire available at the web-page www.haisentitoilterremoto.it. Questionnaire responses are aggregated at the municipality level and analyzed to obtain an intensity defined on an ordinal categorical scale. The main aim of this work is to model macroseismic attenuation and obtain an intensity prediction equation which describes the decay of macroseismic intensity as a function of the magnitude and distance from the hypocentre. To do this we employ an ordered probit model, assuming that the intensity response variable is related through the link probit function to some predictors. Differently from what it is commonly done in the macroseismic literature, this approach takes properly into account the qualitative and ordinal nature of the macroseismic intensity as defined on the MCS scale. Using Markov chain Monte Carlo methods, we estimate the posterior probability of the intensity at each site. Moreover, by comparing observed and estimated intensities we are able to detect anomalous areas in terms of residuals. This kind of information can be useful for a better assessment of seismic risk and for promoting effective policies to reduce major damages.
      219  103
  • Some of the metrics are blocked by your 
    Item type:Publication, Access status: Open Access ,

    Macroseismic Intensity Assessment Method for Web Questionnaires

    (2015) ; ; ; ;
    Tosi, P.; Istituto Nazionale di Geofisica e Vulcanologia, Sezione Roma1, Roma, Italia
    Macroseismic investigation with data collected through web- based questionnaires is today routinely applied by most impor- tant seismological institutions, such as the U.S. Geological Survey (http://earthquake.usgs.gov/earthquakes/dyfi/; last accessed December 2014), British Geological Survey (http://www. earthquakes.bgs.ac.uk/questionnaire/EqQuestIntro.html; last accessed December 2014), European-Mediterranean Seismological Centre (http://www.emsc-csem.org/Earthquake/Contribute/ choose_earthquake.php?lang=en; last accessed December 2014), Schweizerische Erdbebendienst (http://www.seismo.ethz. ch/eq/detected/eq_form/index_EN; last accessed December 2014), Bureau Central Sismologique Français (http://www .seisme.prd.fr/english.php; last accessed December 2014), and the New Zealand GeoNet project (http://www.geonet.org.nz/ quakes/; last accessed December 2014). The wide diffusion of Internet and the citizen collaboration (crowdsourcing) allow documentation of information on seismic effects and production of a macroseismic field with low costs and almost in real time. Transformation from qualitative information (as given by ques- tionnaires) to numerical quantification is a crucial issue. In the traditional evaluation of intensity, experts used to work through a complex comparison of effects basically driven by personal expe- rience. The major problem with this approach concerns the dif- ficulty in verifing and reproducing the evaluation process due to the lack of a detailed explanation of the employed workflow and to the large variability of possible cases. On the other hand, an automatic method for the estimation of macroseismic intensities needs to be completely well defined and specified in order to be reproducible and verifiable. For these reasons, this paper presents a comprehensive explanation of our intensity assessment method. A useful automatic method for intensity assessment should be computationally fast and strictly follow the macroseismic scales. To meet these requirements in 2010, we proposed a method that firstly quantified the effects using additive scores associated with each answer of the questionnaire item and then determined an intensity estimate for each questionnaire (Sbarra et al., 2010). After a trial period and having collected more than 500,000 questionnaires, we were able to thoroughly test the method. As a result of this testing, we describe here a new improved method that takes into account further factors, such as the situation and the location of the observer (Sbarra et al., 2012, 2014), to obtain a more accurate estimate of the macroseismic intensity degree at the municipality level. In this paper, we show some applications of our method with reference to the Mercalli–Cancani–Sieberg (MCS) scale, because this scale has long been used with Italian earthquakes and allows easy comparison between these intensities and other traditional ones.
      343  146
  • Some of the metrics are blocked by your 
    Item type:Publication, Access status: Restricted ,

    On deformation sources in volcanic areas: Modeling the Campi Flegrei (Italy) 1982–84 unrest

    Deformation sources in volcanic areas are generally modeled in terms of pressurized tri-axial ellipsoids or pressurized cracks with simple geometrical shapes, embedded in a homogeneous half-space. However, the assumption of a particular source mechanism and the neglect of medium heterogeneities bias significantly the estimate of source parameters. A more general approach describes the deformation source in terms of a suitable moment tensor. Ratios between moment tensor eigenvalues are shown to provide a strong diagnostic tool for the physical interpretation of the deformation source and medium heterogeneities may be accounted for through 3D finite element computations. Leveling and EDM data, collected during the 1982–84 unrest episode at Campi Flegrei (Italy), are employed to retrieve the complete moment tensor according to a Bayesian inversion procedure, considering the heterogeneous elastic structure of the volcanic area. Best fitting moment tensors are found to be incompatible with any pressurized ellipsoid or crack. Taking into account the deflation of a deeper magma reservoir, which accompanies the inflation of a shallower source, data fit improves considerably but the retrieved moment tensor of the shallow source is found to be incompatible with pressurized ellipsoids, still. Looking for alternative physical models of the dislocation source, we find that the best fit moment tensor can be best interpreted in terms of a mixed mode (shear and tensile) dislocation at 5.5 km depth, striking EW and dipping by ~25°–30° to the North. Gravity changes are found to be compatible with the intrusion of ~60–70·10^6 m^3 of volatile rich magma with density ~2400 kg/m^3.
      705  22
  • Some of the metrics are blocked by your 
    Item type:Publication, Access status: Open Access ,

    Web based macroseismic survey of 2009 L’Aquila earthquakes sequence

    (2009-12) ; ; ; ;
    Sbarra, P.; Istituto Nazionale di Geofisica e Vulcanologia, Sezione Roma1, Roma, Italia
    A new method of macroseismic surveys, based on voluntary collaboration through the Internet, has been running at the Istituto Nazionale di Geofisica e Vulcanologia (INGV) since July 2007. The macroseismic questionnaire is addressed to a single non-specialist; reported effects are statistically analysed to extrapolate a probabilistic estimate of Mercalli Cancani Sieberg and European Macroseismic Scale intensities for that observer. Maps of macroseismic intensity are displayed online in almost real time and are continuously updated when new data are made available. For densely inhabited zones, we have received reports of felt effects for even very small events (M=2). Six earthquakes are presented here, showing the ability of the method to give fast and interesting results. The effects reported in questionnaires coming from three towns are carefully analysed and assigned intensities are compared with those derived from traditional macroseismic surveys, showing the reliability of our web-based method
      688  476
  • Some of the metrics are blocked by your 
    Item type:Publication, Access status: Restricted ,

    On the preparatory processes of the M6.6 earthquake of June 17th, 2000, in Iceland

    A model is proposed to explain the spatial distribution of foreshocks of the June 17th 2000, M s 6.6 earthquake in the South Iceland Seismic Zone (SISZ) and the high stress drop of the mainshock. Fluids of magmatic origin, ascending at near-lithostatic pressure through a low permeability layer perturb the regional stress field, inhibiting fluid flow laterally, where a high strength asperity is left. The asperity is modeled as elastic, embedded within a medium with low effective rigidity. Regional stresses due to tectonic motions are perturbed by the presence of the asperity, enhancing the production of hydrofractures and foreshocks in the NW and SE quadrants and increasing considerably the shear stress within the asperity, leading to the NS striking mainshock.
      135  3