Skip to main content
The search returned 18 results
Now showing 1 - 10 of 18
  • Some of the metrics are blocked by your 
    Item type:Publication, Access status: Open Access ,

    Fault Pattern and Seismotectonic Style of the Campania – Lucania 1980 Earthquake (Mw 6.9, Southern Italy): New Multidisciplinary Constraints

    New fault trace mapping and structural survey of the active faults outcropping within the epicentral area of the Campania-Lucania 1980 normal fault earthquake (Mw 6.9) are integrated with a revision of pre-existing earthquake data and with an updated interpretation of the CROP-04 near-vertical seismic profile to reconstruct the surface and depth geometry, the kinematics and stress tensor of the seismogenic fault pattern. Three main fault alignments, organized in high-angle en-echelon segments of several kilometers in length, are identified and characterized. The inner and intermediate ones, i.e. Inner Irpinia (InIF) and Irpinia Faults (IF), dip eastward; the outer Antithetic Fault (AFA) dips westward. Both the InIF and the IF strike NW-SE along the northern and central segments and rotate to W-E along the southern segments for at least 16 km. We provide evidence of surface coseismic faulting (up to 1 m) not recognized before along the E-W segments and document coseismic ruptures with maximum vertical displacement up to ∼1 m where already surveyed from other investigators 40 years ago. Fault/slip data from surface data and a new compilation of focal mechanisms (1980 – 2018) were used for strain and stress analyses to show a coherent NNE-directed least principal stress over time and at different crustal depths, with a crustal-scale deviation from the classic SW-NE tensional direction across the Apennines of Italy. The continuation at depth of the outcropping faults is analyzed along the trace of the CROP-04 profile and with available hypocentral distributions. Integrating all information, a 3D seismotectonic model, extrapolated to the base of the seismogenic layer, is built. It outlines a graben-like structure with a southern E-W bend developed at depth shallower than 10–12 km, at the hanging wall of an extensional NE- to E-dipping extensional basal detachment. In our interpretation, such a configuration implies a control in the stress transfer during the 1980 earthquake ruptures and provides a new interpretation of the second sub-event, occurred at 20 s. Our reconstruction suggests that the latter ruptured a hanging wall NNE-dipping splay of the E-W striking main fault segment and possibly also an antithetic SSW-dipping splay, in two in-sequence episodes.
      151  130
  • Some of the metrics are blocked by your 
    Item type:Publication, Access status: Open Access ,

    Surface ruptures following the 30 October 2016 Mw 6.5 Norcia earthquake, central Italy

    We present a 1:25,000 scale map of the coseismic surface ruptures following the 30 October 2016 M-w 6.5 Norcia normal-faulting earthquake, central Italy. Detailed rupture mapping is based on almost 11,000 oblique photographs taken from helicopter flights, that has been verified and integrated with field data (>7000 measurements). Thanks to the common efforts of the Open EMERGEO Working Group (130 people, 25 research institutions and universities from Europe), we were able to document a complex surface faulting pattern with a dominant strike of N135 degrees-160 degrees (SW-dipping) and a subordinate strike of N320 degrees-345 degrees (NE-dipping) along about 28km of the active Mt. Vettore-Mt. Bove fault system. Geometric and kinematic characteristics of the rupture were observed and recorded along closely spaced, parallel or subparallel, overlapping or step-like synthetic and antithetic fault splays of the activated fault systems, comprising a total surface rupture length of approximately 46km when all ruptures were considered.
      6034  219
  • Some of the metrics are blocked by your 
    Item type:Publication, Access status: Open Access ,

    A database of the coseismic effects following the 30 October 2016 Norcia earthquake in Central Italy

    We provide a database of the coseismic geological surface effects following the Mw 6.5 Norcia earthquake that hit central Italy on 30 October 2016. This was one of the strongest seismic events to occur in Europe in the past thirty years, causing complex surface ruptures over an area of >400 km2. The database originated from the collaboration of several European teams (Open EMERGEO Working Group; about 130 researchers) coordinated by the Istituto Nazionale di Geofisica e Vulcanologia. The observations were collected by performing detailed field surveys in the epicentral region in order to describe the geometry and kinematics of surface faulting, and subsequently of landslides and other secondary coseismic effects. The resulting database consists of homogeneous georeferenced records identifying 7323 observation points, each of which contains 18 numeric and string fields of relevant information. This database will impact future earthquake studies focused on modelling of the seismic processes in active extensional settings, updating probabilistic estimates of slip distribution, and assessing the hazard of surface faulting.
      6104  92
  • Some of the metrics are blocked by your 
    Item type:Publication, Access status: Restricted ,

    Morphotectonic analysis of the Lunigiana and Garfagnana grabens (northern Apennines, Italy): Implications for active normal faulting

    This work integrates existing structural geology data with new detailed geomorphic analyses of the fluvial network to characterize active and potentially seismogenic faults bordering the Lunigiana and Garfagnana basins in the northern Apennines of Italy. These two basins are NW–SE-oriented asymmetric grabens, bordered by several normal faults with a poorly known, but probable recent slip history. Several strong earthquakes (M 5.0–6.5) have occurred in the area in the last millennium, demonstrating that this is one of the most seismically active areas of the northern Apennines. However, the lack of reliable instrumental data for strong earthquakes, generally low deformation rates, and poor exposures of faulted Quaternary sediments render the characterization of active, seismogenic faults problematic. Here, we quantify the relationships between faults and watershed-scale geomorphology using 10-m digital topography to extract channel and basin metrics, such as steepness, concavity, and stream length-gradient indices of modeled river longitudinal profiles. In particular, convex segments of longitudinal profiles (knickpoints) are investigated in the spatial context of suspected active faults. Several knickpoints arise locally from juxtaposed rock types of different erodibility; however, many others mapped along major normal faults have a clear tectonic origin. In fact, the height of the footwall knickpoints (the closest to the fault trace) varies along-strike the fault, increasing toward the fault center and tapering off toward the fault tips, mimicking the expected displacement profile of a fault. In these cases, we consider the knickpoint height as a proxy of the fault throw accumulated by the youngest fault activity, probably during the late Quaternary. The along-strike distribution of knickpoint heights helps in defining the likely segmentation pattern of the fault system. The identified active normal fault segments have lengths ranging from 9.5 to 28.5 km. The inferred late Quaternary throw rate ranges from 0.3 to 0.8 mm/a; however, the absence of any offset datable material limits our ability to assign precise numeric ages and rates of offset to the faulting.
      227  39
  • Some of the metrics are blocked by your 
    Item type:Publication, Access status: Restricted ,

    Crustal structure and seismotectonics of central Sicily (southern Italy): new constraints from instrumental seismicity

    (2012-06) ; ; ;
    Sgroi, T.; Istituto Nazionale di Geofisica e Vulcanologia, Sezione Roma2, Roma, Italia
    ;
    de Nardis, R.; Dipartimento della Protezione Civile, Via Vitorchiano, Rome, Italy
    In this paper, we propose a new model of the crustal structure and seismotectonics for central Sicily (southern Italy) through the analysis of the depth distribution and kinematics of the instrumental seismicity, occurring during the period from 1983 to 2010, and its comparison with individual geological structures that may be active in the area. The analysed data set consists of 392 earthquakes with local magnitudes ranging from 1.0 to 4.7. We defined a new, detailed 1-D velocity model to relocate the earthquakes that occurred in central Sicily, and we calculated a Moho depth of 37 km and a mean VP/VS ratio of 1.73. The relocated seismic events are clustered mainly in the area north of Caltanissetta (e.g. Mainland Sicily) and in the northeastern sector (Madonie Mountains) of the study area; only minor and greatly dispersed seismicity is located in the western sector, near Belice, and along the southern coast, between Gela and Sciacca. The relocated hypocentral distribution depicts a bimodal pattern: 50 per cent of the events occur within the upper crust at depths less than ~16 km, 40 per cent of the events occur within the middle and depth crust, at depths between 16 and 32 km, and the remaining 10 per cent occur at subcrustal depths. The energy release pattern shows a similar depth distribution. On the basis of the kinematic analysis of 38 newly computed focal plane solutions, two major geographically distinct seismotectonic domains are distinguished: the Madonie Mountain domain, with prevalent extensional and extensional-oblique kinematics associated with upper crust Late Pliocene–Quaternary faulting, and the Mainland Sicily domain, with prevalent compressional and compressional-oblique kinematics associated with thrust faulting, at mid to deep crust depth, along the north-dipping Sicilian Basal Thrust (SBT). The stress inversion of the Mainland Sicily focal solutions integrated with neighbouring mechanisms available in the literature highlights a regional homogeneous compressional tensor, with a subhorizontal NNW–SSE-striking σ1 axis. In addition, on the basis of geodetic data, the Mainland Sicily domain may be attributed to the SSE-ward thrusting of the Mainland Sicily block along the SBT plane. Seismogenic shearing along the SBT at mid-crustal depths was responsible for the unexpected Belice 1968 earthquake (Mw 6.1), with evident implications in terms of hazard assessment.
      537  50
  • Some of the metrics are blocked by your 
    Item type:Publication, Access status: Restricted ,

    The April 2009 Aquila (central Italy) seismic sequence (Mw6.3): A preliminary seismotectonic picture,

    (Nova Science Publishers, New York, 2011) ; ; ; ;
    On April 6, 2009, an Mw 6.3 earthquake struck the town of L’Aquila in the Abruzzo region in central Italy. It was followed by a long seismic crisis with other four events with Mw between 5.1 and 5.6. Seismological and geological data point out an upper crust extensional stress field with an average WSW-ENE tensional axis. In the course of the seismic sequence, two distinct en échelon fault sources were activated: first, the SW-dipping Paganica normal fault, which is associated with the Mw 6.3 event; and, subsequently, the southern part of the WSW-dipping Gorzano normal fault.Co-seismic ground deformation (open fissures, en échelon cracks and shear planes with centimetric downthrows) was surveyed for ~ 13 km along the Paganica fault. The integration of the information from this last Italian earthquake with the previous seismotectonic background has allowed us to further detail the 3-D shape and the size of some of the individual seismogenic sources of the Apennine active extensional belt.
      260  54
  • Some of the metrics are blocked by your 
    Item type:Publication, Access status: Restricted ,

    Coseismic ground deformation of the 6 April 2009 L’Aquila earthquake (central Italy, Mw6.3)

    We provide field data of coseismic ground deformation related to the 6 April Mw 6.3 L’Aquila normal faulting earthquake. Three narrow fracture zones were mapped: Paganica‐Colle Enzano (P‐E), Mt. Castellano‐Mt. Stabiata (C‐S) and San Gregorio (SG). These zones define 13 km of surface ruptures that strike at 130–140°. We mapped four main types of ground deformation (free faces on bedrock fault scarps, faulting along synthetic splays and fissures with or without slip) that are probably due to the near‐surface lithology of the fault walls and the amount of slip that approached the surface coseismically. The P‐E and C‐S zones are characterized by downthrow to the SW (up to 10 cm) and opening (up to 12 cm), while the SG zone is characterized only by opening. Afterslip throw rates of 0.5–0.6 mm/day were measured along the Paganica fault, where paleoseismic evidence reveals recurring paleo‐earthquakes and post‐24.8 kyr slip‐rate ≥ 0.24 mm/yr.
      236  47
  • Some of the metrics are blocked by your 
    Item type:Publication, Access status: Restricted ,

    Analysis of the 9 September 1998 Mw 5.6 Mercure earthquake sequence (Southern Apennines, Italy): A multidisciplinary approach

    The Mercure earthquake (Mw 5.6) of September 9, 1998 and the associated aftershocks occurred in a small Pleistocene–Holocene continental basin of the Southern Apennines, in a region of low instrumental and moderate historical seismicity. Seismological, photogeological and field survey data were analyzed and integrated in order to identify the likely seismogenic structure, to depict its 3-D geometry and kinematics and to provide further constraints to the seismogenic potential of the rupture processes in the study area. The mainshock occurred at the NW edge of the seismic sequence (40.03°N and 15.95°) at a depth of 10.5± 1.5 km. The aftershocks volume was determined from the relocation of about 200 events (1.1=Ml=3.9) registered by local networks from September 10 to October 12, 1998. The relocation procedure was based on choosing P and S waves for all the events and the definition of ten 9-layers velocity models appropriate for the different stations. The kinematics of the seismogenic deformation was defined through the computation of 36 well-constrained focal mechanisms. The seismological and geological stress tensors were determined through inversion of focal mechanisms and fault slip data. Both of them resulted in the tensional type, with ENE–WSW and NE–SW trending σ3 axis, respectively. The map and the section distribution of the aftershocks sequence depicts an average NW–SE striking and 60° SW-dipping seismogenic volume. Most of the events (80%) were located at depths between 3 and 8 km in the footwall of the Mercure basin (MBB) boundary fault but along the possible down-dip continuation of a previously unidentified, N120°E striking and WSW-dipping, Holocene normal fault alignment, which extends from Castello Seluci to Piana Perretti and Timpa della Manca (CPST fault). A small percentage of events (10%) were located at depths between 10 and 12 km where the CPST seismogenic fault may detach. The reconstructed rupture area (RA) of the Mercure 1998 earthquake has an along-strike length (L) of about 9 km and a down-dip width (W) of about 9 km, yielding a total area of approximately 81 km2 . On the other hand, the L and W dimension of the entire individual seismogenic structure identified as responsible for the earthquake, e.g. the CPST fault, are about 19 and 12 km, respectively, with a consequent RA of about 230 km2 . This may imply a maximum magnitude (Mw) equal to 6.3 which lead us to compare the Mercure area, in terms of seismogenic hazard, to the adjacent Pollino-Castrovillari area where strong paleoseismological events are documented.
      172  38
  • Some of the metrics are blocked by your 
    Item type:Publication, Access status: Restricted ,

    Rates of active compressional deformation in central Italy and Sicily: evaluation of the seismic budget

    (2009) ; ; ;
    Visini, F.
    ;
    De Nardis, R.
    Historical and recent seismicity records and available source mechanisms in eastern-central Italy (Marche–Adriatic region), in mainland-southern Sicily and in the Tyrrhenian offshore of northern Sicily show com- parable deformation patterns. Seismotectonic consider- ations indicate that each of the three areas represents a broad seismogenic province of relatively homogeneous deformation. On the basis of the historical earthquake catalogue, the parameters of the Gutenberg–Richter dis- tribution have been calculated by means of a Monte Carlo simulation method. The average moment tensors have been computed from focal mechanism data and the strain rate and velocity tensors evaluated by means of Kostrov’s (in Izv Acad Sci USSR Phys Solid Earth 1:23–44, 1974) relation, which also considers the shape and size of the seismogenic volume. The uncertainties have been system- atically incorporated. The results show that the three seis- motectonic provinces are all undergoing shortening at seismic rates (*0.3 mm/year in the WSW–ENE direction in the eastern Marche–Adriatic region, *0.1 mm/year in the N–S direction in mainland-southern Sicily and *0.2 mm/year in the NW–SE direction in the Southern Tyrrhenian zone). The motion pattern in the Marche– Adriatic and in the Sicilian provinces suggests that these areas undergo active crust-scale deformation along reverse shear zones, in agreement with recent horizontal GPS motion model and other independent evidence.
      175  76
  • Some of the metrics are blocked by your 
    Item type:Publication, Access status: Restricted ,

    From regional seismic hazard to “scenario earthquakes” for seismic microzoning: A new methodological tool for the Celano Project

    We present the results of a probabilistic seismic hazard assessment and disaggregation analysis aimed to understand the dominant magnitudes and source-to-site distances of earthquakes that control the hazard at the Celano site in the Abruzzo region of central Italy. Firstly, we calculated a peak ground acceleration map for the central Apennines area, by using a model of seismogenic sources defined on geological-structural basis. The source model definition and the probabilistic seismic hazard evaluation at the regional scale (central Apennines) were obtained using three different seismicity models (Gutenberg–Richter model; characteristic earthquake model; hybrid model), consistent with the available seismological information. Moreover, a simplified time-dependent hypothesis has been introduced, computing the conditional probability of earthquakes occurrence by Brownian passage time distributions. Subsequently, we carried out the disaggregation analysis, with a modified version of the SEISRISK III code, in order to separate the contribution of each source to the total hazard. The results show the percentage contribution to the Celano hazard of the various seismogenic sources, for different expected peak ground acceleration classes. The analysis was differentiated for close (distance from Celano o20 km) and distant (distance from Celano 420 km) seismogenic sources. We propose three different ‘‘scenario earthquakes’’, useful for the site condition studies and for the seismic microzoning study: (1) large (M 1⁄4 6.6) local (Celano-epicentre distance 􏰀16 km) earthquake, with mean recurrence time of 􏰀590 years; (2) moderate (M 1⁄4 5.5) local (Celano-epicentre distance 􏰀7.5 km) earthquake, with mean recurrence time of 􏰀500 years; and (3) large (M 1⁄4 6.6) distant (Celano-epicentre distance 􏰀24 km) earthquake, with mean recurrence time of 􏰀980 years. The probabilistic and time-dependent approach to the definition of the ‘‘scenario earthquakes’’ changes clearly the results in comparison to traditional deterministic analysis, with effects in terms of engineering design and seismic risk reduction. r 2007 Elsevier Ltd. All rights reserved.
      243  40