Cornou, Cécile
Preferred name
Cornou, Cécile
ORCID
19 results
Filters
Settings
The search returned 19 results
Now showing 1 - 10 of 19
- Some of the metrics are blocked by yourconsent settings
Item type:Publication, Access status: Open Access , High-Resolution seismic arrays in Amatrice village for a better estimation of site effects
The August 24 , 2016 M 6.0 Amatrice earthquake is the beginning of the 2016-2018 central Italy seismic sequence. One of the first places to be highly damaged is the wide territory of Amatrice municipality. Seismic Microzonation studies (SM) started during the early stages of emergency with the installation of the 3A temporary seismic network (Cara et al. 2019) and continued with an intense campaign of multidisciplinary studies (Priolo et al. 2020). On the light of the information retrieved, this work shows the results of additional geophysical investigations carried out in specific sites of Amatrice village including the historical center, the most damaged area. We applied f-k and MSPAC analysis to data collected at 5 sites to obtain dispersion curves and invert them to retrieve the subsoil Vs profile. All results were therefore integrated with the already available geological and geophysical information to better detail the subsoil model.39 112 - Some of the metrics are blocked by yourconsent settings
Item type:Publication, Access status: Open Access , Indicators for site characterization at seismic station: recommendation from a dedicated survey
In recent years, the permanent seismic networks worldwide have largely increased, raising the amount of earthquake signals and the applications using seismic records. Although characterization of the soil properties at recording stations has a large impact on hazard estimates, it has not been implemented so far in a standardized way for reaching high-level metadata. To address this issue, we built an online questionnaire for the identification of the indicators useful for a reliable site characterization at a seismic station. We analysed the answers of a large number of experts in different fields, which allowed us to rank 24 different indicators and to identify the most relevant ones: fundamental frequency (f0), shear-wave velocity profile (VS), time-averaged Vs over 30 m (VS30), depth of seismological and engineering bedrock (Hseis_bed and Heng_bed), surface geology and soil class. Moreover, the questionnaire proposed two additional indices in terms of cost and difficulty to obtain a reliable value of each indicator, showing that the selection of the most relevant indicators results from a complex balance between physical relevancy, average cost and reliability. For each indicator we propose a summary report, provided as editable pdf, containing the background information of data acquisition and processing details, with the aim to homogenize site metadata information at European level and to define the quality of the site characterization (see companion paper Di Giulio et al. 2021). The selected indicators and the summary reports have been shared within European and worldwide scientific community and discussed in a dedicated international workshop. They represent a first attempt to reach a homogeneous set of high-level metadata for site characterization.193 335 - Some of the metrics are blocked by yourconsent settings
Item type:Publication, Access status: Open Access , Quality assessment for site characterization at seismic stations
Many applications related to ground-motion studies and engineering seismology benefit from the opportunity to easily download large dataset of earthquake recordings with different magnitudes. In such applications, it is important to have a reliable seismic characterization of the stations to introduce appropriate correction factors for including site amplification. Generally, seismic networks in Europe describe the site properties of a station through geophysical or geological reports, but often ad-hoc field surveys are missing and the characterization is done using indirect proxy. It is then necessary to evaluate the quality of a seismic characterization, accounting for the available site information, the measurements procedure and the reliability of the applied methods to obtain the site parameters.In this paper, we propose a strategy to evaluate the quality of site characterization, to be included in the station metadata. The idea is that a station with a good site characterization should have a larger ranking with respect to one with poor or incomplete information. The proposed quality metric includes the computation of three indices, which take into account the reliability of the available site indicators, their number and importance, together with their consistency defined through scatter plots for each single pair of indicators. For this purpose, we consider the seven indicators identified as most relevant in a companion paper (Cultrera et al. 2021): fundamental resonance frequency, shear-wave velocity profile, time-averaged shear-wave velocity over the first 30 m, depth of both seismological and engineering bedrock, surface geology and soil class.169 198 - Some of the metrics are blocked by yourconsent settings
Item type:Publication, Access status: Restricted , Geopsy: A User-Friendly Open-Source Tool Set for Ambient Vibration Processing
Ambient vibrations are nowadays considerably used worldwide for numerous types of engineering applications and scientific research. Geopsy and its companion tools are part of that landscape. Since the first release of the program package in 2005, as outcome of the European Union project Site Effects aSsessment from AMbient noisE, Geopsy has become a mature multiplatform open-source package (released under GNU Public License version 3) that has already been recognized as a reference tool for analyzing ambient vibration data in the context of site characterization studies. The community of users has grown from a core group of researchers up to thousands of seismologists and engineers on every career level and on all continents. The versatility of geopsy allows for the processing of all kinds of data needed in site characterization studies, that is, from single station single trace to three-component array recordings. In all of the aforementioned cases, the steps from field acquisition to the production of publication-ready figures are covered and supported by user-friendly graphical user interfaces or corresponding command-line tools for the automation of the complete processing chain. To avoid black-box usage, a number of lower-level tools guarantee maximum flexibility in accessing and controlling processing results at any stage of the analysis295 5 - Some of the metrics are blocked by yourconsent settings
Item type:Publication, Access status: Open Access , Best practice and quality assessment procedures for site characterization at seismic station: an European initiative
Seismic site characterization of rock and soil properties has a large impact on earthquake ground motions and engineering seismology, especially for evaluation of local site amplification, calibration of strong-motion records and realistic shaking estimates at seismic stations, site-specific hazard assessment, estimation of ground motion models and soil classification for building code applications. However, there is not yet a common way to exchange site characterization information, whereas setting-up standard practices and quality assessment are becoming very important to reach high-level metadata. Within the framework of the SERA “Seismology and Earthquake Engineering Research Infrastructure Alliance for Europe” Horizon 2020 Project, a networking activity is leading to the definition of a European strategy and standards for site characterization of seismic stations in Europe. Based on the results of an online questionnaire, we first defined a list of indicators considered as mandatory for a reliable site characterization: fundamental resonance frequency, shear-wave velocity profile (Vs), time-averaged Vs over the first 30 m, depth of seismological and engineering bedrock, surface geology, soil class. We then proposed a summary report for each indicator, containing the most significant background information of data acquisition and processing details, and a quality metrics scheme. This requires the evaluation of both (i) reliability of the site characterization indicators provided by different methods, and (ii) consistency among the indicators according to the current knowledge and experience of the scientific community. The quality metrics application to some Italian accelerometric sites, characterized within the Italian Civil Protection Department-INGV agreement (2016 to 2021), highlights the capabilities of capturing the characterization quality. These guidelines have been shared within European and worldwide scientific community and validated through focus groups during a dedicated workshop (https://sites.google.com/view/site-characterization-workshop/). They represent a first attempt to reach high-level metadata for site characterization, being aware that they can be improved and modified after a few years of experience and feedback from users.93 114 - Some of the metrics are blocked by yourconsent settings
Item type:Product, Access status: Open Access , 62 117 - Some of the metrics are blocked by yourconsent settings
Item type:Publication, Access status: Open Access , SITE AND SEISMIC STATION CHARACTERIZATION: AN EUROPEAN INITIATIVE
Site characterization is a key input in seismic hazard and risk assessment (e.g. Ground Motion Prediction Equation, microzonation studies, damage scenarios) and seismic design (building codes, critical facilities). Although the number of strong-motion stations in free-field and engineering structures has largely increased over the world in the last twenty years, only a limited number of sites includes detailed site condition indicators: mostly geology and EC8 soil class, more rarely shear-wave velocity (Vs) information (e.g. Vs30 and Vs profiles), without proper documentation and quality assessment in most cases. This lack of information is a critical issue, e.g. for deriving reference rock/soil velocity profiles for region-specific GMPEs, site-specific hazard assessment, vs-kappa adjustments, seismic response of engineering infrastructures, risk modeling at urban or regional scale. Within the framework of the SERA “Seismology and Earthquake Engineering Research Infrastructure Alliance for Europe” Horizon 2020 Project, a networking activity has been set up to propose a comprehensive European strategy and standards fostering site characterization of seismic stations in Europe. We will present the status of this networking activity that focuses on several issues. The first target is to evaluate the most relevant site characterization scalar, depth and frequencydependant indicators (e.g. Vs30, resonance period, velocity profiles, kappa, amplification factors and functions, etc.) for seismic hazard purposes and, thereafter, to propose best practice for site characterization together with standards for overall quality metrics on site characterization. The second target focuses on disseminating, within the broader seismological and engineering community, site characterization metadata developed within the EU NERA and EPOS-IP projects in order to validate and/or further develop metadata format schemes for wide use. Based on available site characterization information in Europe and considering the research and engineering needs, the third target proposes to set up a road map to prioritize strong motion site characterization in Europe for the next decade. Finally, a task is dedicated to investigate relevance of new site condition and amplification proxies (for example combining resonance frequency, local slope and other parameters, proxy for non-linear effects, wavelength-scaled curvature and topographic position index position as proxies for topographic effects, aggravation factor for basin effects, etc.) and their implementation at the European scale and into site characterization metadata.73 146 - Some of the metrics are blocked by yourconsent settings
Item type:Publication, Access status: Open Access , COMMON BEST PRACTICE PROCEDURES FOR SITE-EFFECTS CHARACTERIZATION: RESULTS FROM AN INTERNATIONAL QUESTIONNAIRE
Setting-up standard practices, together with a clear evaluation of their quality, are becoming very important to reach high-level sitecharacterization metadata, useful for site effects studies, seismic microzonation, seismic hazard assessment and many other research fields. In the last years, several efforts have been done at national and international level to define standards and guidelines for seismic site characterization (e.g., Foti et al., Bull Earthquake Eng, 2017, doi:10.1007/s10518-017-0206-7; Geological Survey of Canada, Open File 7078, 2012, doi:10.4095/291753; Consortium of Organizations for Strong Motion Observation Systems, http://www.cosmos-eq.org; WP12- Deliverable D23.12, SESAME European research project, 2004). Within the 2017-2020 activities of the “Networking databases of site and station characterization” (WP7-NA5 of the SERA “Seismology and Earthquake Engineering Research Infrastructure Alliance for Europe” Horizon 2020 Project), European teams are working on the best practice for site characterization and related quality assessment target to network operators and seismological and engineering communities. More specifically, the goals of this task are: (i) to evaluate the most relevant site effects indicators; (ii) to write practical guidelines for site effects characterization and related site condition parameters at rock sites (including topography effects) and soft soils (including non-linear and basin effects); (iii) to propose a quality metrics on the site characterization parameters. As a first step, we have prepared a Questionnaire for collecting existing bibliography and best practice schemes to compute indicators for site effects characterization. We sent the Questionnaire to selected research groups of different countries, both partners of the SERA project (ISTERRE-CNRS, France; ETH, Switzerland; INGV, Italy; AUTH, Greece) and several external groups involved in site characterization (Caltech-USGS, USA; AFAD, Turkey; Virginia Tech USA; GFZ, Germany; ITSAK, Greece; University of Potsdam, Germany; UoTUniversity of Texas, USA; INGV, Italy), and collected back the answers. Each team provided the list of site effects indicators, their importance for site effects assessment (based on expert judgment) and their preferred methods of analysis for retrieving the indicators. In the Questionnaire, the site-effect indicators were grouped into (i) Scalar (e.g. resonance frequency), (ii) Depthdependent (e.g. shear-wave Vs profile), (iii) Frequency-dependent (e.g. spectral ratio), (iv) Geological/Morphological (e.g. Surface geology/lithology unit) and (v) Advanced siteeffects (e.g. numerical 2D or 3D modeling) parameters. Each indicator is described through several fields, summarized into five main subsets: Importance - in-depth index related to the amount of knowledge on site-effects characterization supplied by each indicator, and it can assume three values (basic, intermediate and top), depending on the expert judgment; Feasibility - level of difficulty to measure the target indicator (easy, average and difficult); Data - type of data used to measure the proposed indicator; Analysis - method of analysis and suggested code to derive the indicator, including the value’s selection and uncertainty estimation; Bibliography - references and guidelines related to the best practice of measurement and analysis. A preliminary analysis of the Questionnaires reveals a consensus on several basic indicators, such as the resonance frequency, Vs30 or the 1D Vs profile, even if the teams use different data acquisition, analysis methods and metrics. Fewer teams indicated more advanced parameters, such as 2D-3D site goals of this task are: (i) to evaluate the most relevant site effects indicators; (ii) to write practical guidelines for site effects characterization and related site condition parameters at rock sites (including topography effects) and soft soils (including non-linear and basin effects); (iii) to propose a quality metrics on the site characterization parameters. As a first step, we have prepared a Questionnaire for collecting existing bibliography and best practice schemes to compute indicators for site effects characterization. We sent the Questionnaire to selected research groups of different countries, both partners of the SERA project (ISTERRE-CNRS, France; ETH, Switzerland; INGV, Italy; AUTH, Greece) and several external groups involved in site characterization (Caltech-USGS, USA; AFAD, Turkey; Virginia Tech USA; GFZ, Germany; ITSAK, Greece; University of Potsdam, Germany; UoTUniversity of Texas, USA; INGV, Italy), and collected back the answers. Each team provided the list of site effects indicators, their importance for site effects assessment (based on expert judgment) and their preferred methods of analysis for retrieving the indicators. In the Questionnaire, the site-effect indicators were grouped into (i) Scalar (e.g. resonance frequency), (ii) Depthdependent (e.g. shear-wave Vs profile), (iii) Frequency-dependent (e.g. spectral ratio), (iv) Geological/Morphological (e.g. Surface geology/lithology unit) and (v) Advanced siteeffects (e.g. numerical 2D or 3D modeling) parameters. Each indicator is described through several fields, summarized into five main subsets: Importance - in-depth index related to the amount of knowledge on site-effects characterization supplied by each indicator, and it can assume three values (basic, intermediate and top), depending on the expert judgment; Feasibility - level of difficulty to measure the target indicator (easy, average and difficult); Data - type of data used to measure the proposed indicator; Analysis - method of analysis and suggested code to derive the indicator, including the value’s selection and uncertainty estimation; Bibliography - references and guidelines related to the best practice of measurement and analysis. A preliminary analysis of the Questionnaires reveals a consensus on several basic indicators, such as the resonance frequency, Vs30 or the 1D Vs profile, even if the teams use different data acquisition, analysis methods and metrics. Fewer teams indicated more advanced parameters, such as 2D-3D site95 106 - Some of the metrics are blocked by yourconsent settings
Item type:Publication, Access status: Restricted , Basin effects on ground motion: the case of a high-resolution experiment in Cephalonia (Greece)
In this study data and results of a high-resolution experiment in Cephalonia (Greece) regarding empirical basin effects are presented. A total of 59 velocimeters and 17 accelerometers were deployed in the basin of Argostoli Cephalonia (Greece), for a period of 7 months (September 2011–April 2012). Due to high seismicity of the western Greece and surrounding area this array recorded thousands of local, regional and global events. Data used in this work come from a selection of 162 regional and local earthquakes, 3 km ≤ R ≤ 600 km, with magnitude range, 1.0 ≤ M ≤ 5.2. Based on high signal-to-noise ratio recordings and two selected reference stations, variation of several intensity measures (PGA, PGV, Arias Intensity, Cumulative Absolute Velocity), significant duration, HVSR and SSR of ground motion recordings on soil sites within the basin is carefully examined for a range of frequencies of engineering interest. Comparison of results with a detailed 2D geologic model shows a good consistency both in amplification and frequency domain. Influence of “reference” site on ground motion variation of soil sites is also discussed in light of our results. Finally, it is suggested that 2D or/and 3D theoretical modeling should be performed given the availability of geological and geophysical parameters to define a realistic model of the basin. Results of this study can undoubtedly serve in model validation and improvement of ground motion simulation tools.253 14 - Some of the metrics are blocked by yourconsent settings
Item type:Publication, Access status: Restricted , Guidelines for the good practice of surface wave analysis: a product of the InterPACIFIC project
Surface wave methods gained in the past decades a primary role in many seismic projects. Specifically, they are often used to retrieve a 1D shear wave velocity model or to estimate the VS,30 at a site. The complexity of the interpretation process and the variety of possible approaches to surface wave analysis make it very hard to set a fixed standard to assure quality and reliability of the results. The present guidelines provide practical information on the acquisition and analysis of surface wave data by giving some basic principles and specific suggestions related to the most common situations. They are primarily targeted to non-expert users approaching surface wave testing, but can be useful to specialists in the field as a general reference. The guidelines are based on the experience gained within the InterPACIFIC project and on the expertise of the participants in acquisition and analysis of surface wave data.203 5
