Theodoulidis, Nikos
Preferred name
Theodoulidis, Nikos
Main Affiliation
19 results
Filters
Settings
The search returned 19 results
Now showing 1 - 10 of 19
- Some of the metrics are blocked by yourconsent settings
Item type:Publication, Access status: Restricted , Toward a ground-motion logic tree for probabilistic seismic hazard assessment in Europe
(2012-02-22); ; ; ; The Seismic Hazard Harmonization in Europe (SHARE) project, which began in June 2009, aims at establishing new standards for probabilistic seismic hazard assessment in the Euro-Mediterranean region. In this context, a logic tree for ground-motion prediction in Europe has been constructed. Ground-motion prediction equations (GMPEs) and weights have been determined so that the logic tree captures epistemic uncertainty in ground-motion prediction for six different tectonic regimes in Europe. Here we present the strategy that we adopted to build such a logic tree. This strategy has the particularity of combining two complementary and independent approaches: expert judgment and data testing. A set of six experts was asked to weight pre-selected GMPEs while the ability of these GMPEs to predict available data was evaluated with the method of Scherbaum et al. (Bull Seismol Soc Am 99:3234–3247, 2009). Results of both approaches were taken into account to commonly select the smallest set of GMPEs to capture the uncertainty in ground-motion prediction in Europe. For stable continental regions, two models, both from eastern North America, have been selected for shields, and three GMPEs from active shallow crustal regions have been added for continental crust. For subduction zones, four models, all non-European, have been chosen. Finally, for active shallow crustal regions, we selected four models, each of them from a different host region but only two of them were kept for long periods. In most cases, a common agreement has been also reached for the weights. In case of divergence, a sensitivity analysis of the weights on the seismic hazard has been conducted, showing that once the GMPEs have been selected, the associated set of weights has a smaller influence on the hazard.249 20 - Some of the metrics are blocked by yourconsent settings
Item type:Publication, Access status: Open Access , NERA project - Deliverable D11.4: Array measurements
The aim of this Task is to present the seismological data and some preliminary empirical results related to two deployed specific arrays; (a) the Argostoli seismological array and (b) the Fucino seismological array. Both experiment arrays provided high quality data that along with corresponding geological and geophysical measurements may serve to critical evaluation of site effects and basin effects. In addition, work on modelling of basin effects may be significantly benefited by the observed acquired in both sites. Given that the analyses of the data obtained during the aforementioned experimental arrays will be performed in close link with activity of NERA-JRA3, the following goals are set: To investigate the link between ground motion spatial variability, strains, seismic wavefield and subsurface properties To compare numerical estimates of ground strain with actual measurements To investigate the capability of estimating ground strains from noise correlation studies. In order to organize and accomplish the work according to the initial schedule, several meetings (actual or/and Skype) among the participants took place during the 2nd year of the NERA-JRA1 project. Minutes of these meetings are given in Appendices 1, 2, 3 and 4.143 245 - Some of the metrics are blocked by yourconsent settings
Item type:Publication, Access status: Open Access , Site effect estimation through site characterization from ambient noise recordings,
(2010-09); ; ; ; Site effect assessment is an important step in seismic risk mitigation. There is therefore a drastic need for co proxies to site effects estimates. In that context, a new promising approach was proposed, using the time-avera over the top z meters with z varying form 5, 10, 20 and 30 meters (Vsz) and the fundamental resonance frequen two-parameters characterization of a site. Then to assess site effect, a Site Amplification Prediction Equat completely defined by these two parameters was build-up based on Japanese data from the KiK-Net network. Thu to be validated using other dataset. For that aim the EUROSEIS-test data is a suitable one. The EUROSE sedimentary basin in northern-Greece that has been thoroughly investigated through grants from the European C mainly to study site effects. Fourteen accelerometric stations have been installed since 1995, that to date recorded 100 events. After a review of the main available information over the EUROSEIS-test, we end up with a poor Vs for some of the accelerometric stations. Thus eight accelerometric stations were selected for noise array me surveys to provide more details information about Vsz and f0 parameters. The noise array technique has been pro decades ago but its development is still in progress, particularly regarding the inversion step. Different approaches el al. 2009, Renalier et al. 2009) were tested in this study to provide Vsz. These two inversion strategies provide Vsz for z equals to 10, 20 and 30 meters. With the resulting Vsz and f0 from noise analysis, a validation-test of th SAPE was realized. The results of such a comparison are encouraging and indicate as well limitations of the SAP It is a promising tool for engineering and seismic risk management.136 221 - Some of the metrics are blocked by yourconsent settings
Item type:Publication, Access status: Restricted , Statistical correlation of earthquake and ambient noise spectral ratios
(2014); ; ; ; The Horizontal-to-Vertical Spectral Ratio from earthquake (HVSR) and from ambient noise (HVN) recordings realistically indicate the fundamental frequency of soil response but, for the majority of the worldwide examined sites, they do not provide reliable amplification curves as calculated by the earthquake standard Spectral Ratio (SSR). Given the fact that HVSR and especially HVN can be easily obtained, it is challenging to search for a meaningful correlation with SSR amplification functions for the entire frequency band and to use the results for the SSR estimate at a further site where only noise measurements are available. To this aim we used recordings from 75 sites worldwide and we applied a multivariate statistical approach (canonical correlation analysis) to investigate and quantify any correlation among spectral ratios. The canonical correlation between SSR and HVN is then used to estimate the expected SSR at each site by a weighted average of the SSR values measured at the other sites; the weights are properly set to account more for sites with similar behaviour in terms of the canonical correlation results between HVN and SSR. This procedure, repeated for all sites in turn, constitutes the basis of a cross validation. The comparison between the inferred and the original SSR highlights the improvements of site response estimation with respect to the use of ambient noise techniques. The goodness and limitations of the reconstruction procedure are explained by specific geological settings.382 56 - Some of the metrics are blocked by yourconsent settings
Item type:Publication, Access status: Restricted , Correlation between damage distribution and ambient noise H/V spectral ratio: the SESAME project results
(2008); ; ; ; In the framework of the SESAME project one of the taskswas the compilation of all available ambient noise measurements within urban environments affected by historical or/and recent strong earthquakes in Europe. The aim of such a task was to give an answer to the question; “How does horizontal-to-vertical ambient noise spectral ratio compare with damage in modern cities?”. For this purpose five European urban areas, namely, Angra do Heroismo (Portugal), Fabriano and Palermo (Italy), Thessaloniki and Kalamata (Greece) were selected for which spatial damage information was available either in terms of modified Mercalli intensity or in EMS98 damage grades. The geological setting of the examined sites as well as the causative earthquakes are satisfactorily known. Ambient noise recordings compiled for all examined sites have been homogeneously processed by a technique developed and agreed upon SESAME project. Using a standard multivariate statistical analysis, namely, factor analysis and canonical correlation, the horizontal-to-vertical ambient noise spectral ratio (HVNSR) is correlated with damage pattern observed within examined urban areas. Results show that, in some cases (Thessaloniki, Palermo), the HVNSR seems to be able to differentiate between areas previously shown to be associated with higher damage. In other cases however (Angra do Heroismo, Fabriano, Kalamata), the correlation is not statistically significant indicating thus the complex character of the parameters involved, implying that currently there is no a straightforward way that a value of HVNSR can correctly predict the extent to which a given region will be associated with increased damage.235 34 - Some of the metrics are blocked by yourconsent settings
Item type:Publication, Access status: Restricted , Near-source high-rate GPS, strong motion and InSAR observations to image the 2015 Lefkada (Greece) Earthquake rupture history
The 2015/11/17 Lefkada (Greece) earthquake ruptured a segment of the Cephalonia Transform Fault (CTF) where probably the penultimate major event was in 1948. Using near-source strong motion and high sampling rate GPS data and Sentinel-1A SAR images on two tracks, we performed the inversion for the geometry, slip distribution and rupture history of the causative fault with a three-step self-consistent procedure, in which every step provided input parameters for the next one. Our preferred model results in a ~70° ESE-dipping and ~13° N-striking fault plane, with a strike-slip mechanism (rake ~169°) in agreement with the CTF tectonic regime. This model shows a bilateral propagation spanning ~9 s with the activation of three main slip patches, characterized by rise time and peak slip velocity in the ranges 2.5-3.5 s and 1.4-2.4 m/s, respectively, corresponding to 1.2-1.8 m of slip which is mainly concentrated in the shallower (<10 km) southern half of the causative fault. The inferred slip distribution and the resulting seismic moment (M0 = 1.05 × 1019N m) suggest a magnitude of Mw6.6. Our best solution suggests that the occurrence of large (Mw > 6) earthquakes to the northern and to the southern boundaries of the 2015 causative fault cannot be excluded.531 5 - Some of the metrics are blocked by yourconsent settings
Item type:Publication, Access status: Open Access , Inversion of surface wave dispersion at european strong motion sites using a multi-model parameterization and an information-theoretic approach
Within the scope of the EC-projects NERIES and ITSAK-GR we have applied a procedure able to combine a multi-model space parameterization and an information theoretic approach in analysis of dispersion curve inversion. In detail we considered the dispersion curve assessed at 14 strong motion European sites. At each site we investigated the model space through four different parameterization groups within the wavelength range estimated by actual dispersion curves. In order to explore the influence of model space we increased progressively the number of layers for each parameterization. We therefore addressed the model evaluation among a set of competing models obtained by inversion following the corrected Akaike’s Information Criterion(AICc). By using such information-theoretic approach, we found an acceptable agreement between the inverted shear-velocity profiles of the best models and the available borehole results.176 756 - Some of the metrics are blocked by yourconsent settings
Item type:Publication, Access status: Restricted , Basin effects on ground motion: the case of a high-resolution experiment in Cephalonia (Greece)
In this study data and results of a high-resolution experiment in Cephalonia (Greece) regarding empirical basin effects are presented. A total of 59 velocimeters and 17 accelerometers were deployed in the basin of Argostoli Cephalonia (Greece), for a period of 7 months (September 2011–April 2012). Due to high seismicity of the western Greece and surrounding area this array recorded thousands of local, regional and global events. Data used in this work come from a selection of 162 regional and local earthquakes, 3 km ≤ R ≤ 600 km, with magnitude range, 1.0 ≤ M ≤ 5.2. Based on high signal-to-noise ratio recordings and two selected reference stations, variation of several intensity measures (PGA, PGV, Arias Intensity, Cumulative Absolute Velocity), significant duration, HVSR and SSR of ground motion recordings on soil sites within the basin is carefully examined for a range of frequencies of engineering interest. Comparison of results with a detailed 2D geologic model shows a good consistency both in amplification and frequency domain. Influence of “reference” site on ground motion variation of soil sites is also discussed in light of our results. Finally, it is suggested that 2D or/and 3D theoretical modeling should be performed given the availability of geological and geophysical parameters to define a realistic model of the basin. Results of this study can undoubtedly serve in model validation and improvement of ground motion simulation tools.253 14 - Some of the metrics are blocked by yourconsent settings
Item type:Publication, Access status: Restricted , Ground structure imaging by inversions of Rayleigh wave ellipticity: sensitivity analysis and application to European strong-motion sites
(2013-01); ; ; ; The knowledge of the local soil structure is important for the assessment of seismic hazards. A widespread, but time-consuming technique to retrieve the parameters of the local underground is the drilling of boreholes. Another way to obtain the shear wave velocity profile at a given location is the inversion of surface wave dispersion curves. To ensure a good resolution for both superficial and deeper layers, the used dispersion curves need to cover a wide frequency range. This wide frequency range can be obtained using several arrays of seismic sensors or a single array comprising a large number of sensors. Consequently, these measurements are time-consuming. A simpler alternative is provided by the use of the ellipticity of Rayleigh waves. The frequency dependence of the ellipticity is tightly linked to the shear wave velocity profile. Furthermore, it can be measured using a single seismic sensor. As soil structures obtained by scaling of a given model exhibit the same ellipticity curve, any inversion of the ellipticity curve alone will be ambiguous. Therefore, additional measurements which fix the absolute value of the shear wave velocity profile at some points have to be included in the inversion process. Small-scale spatial autocorrelation measurements or MASW measurements can provide the needed data. Using a theoretical soil structure, we show which parts of the ellipticity curve have to be included in the inversion process to get a reliable result and which parts can be omitted. Furthermore, the use of autocorrelation or high-frequency dispersion curves will be highlighted. The resulting guidelines for inversions including ellipticity data are then applied to real data measurements collected at 14 different sites during the European NERIES project. It is found that the results are in good agreement with dispersion curve measurements. Furthermore, the method can help in identifying the mode of Rayleigh waves in dispersion curve measurements.298 63 - Some of the metrics are blocked by yourconsent settings
Item type:Publication, Access status: Restricted , Statistical investigation of site effects using earthquake and ambient noise recordings (part 2): reconstruction of earthquake spectral ratio from noise
Standard spectral ratio from earthquake recordings (SSR) is considered the reference empirical method for assessing site effects as a function of frequency. However, other estimates can be easily obtained from noise measurements (i.e., Horizontal-to-Vertical Spectral Ratio, HVN), even though their reliability in terms of amplitude is controversial. In the framework of the ToK ITSAK-GR (2006-2010) and NERA (2007-2013) EC projects. Recordings from 64 sites from very different geographical areas where analyzed in the companion paper Cultrera et al. (2012); The authors evidenced statistically significant correlations between SSR and HVN through an appropriate linear combination of spectral ratio amplitudes using the canonical correlation technique. In the present paper we go one step further and show how to estimate the SSR spectral ratio of specific sites when only single station noise measurements are available, using the results of the canonical correlation analysis between SSR and HVN recorded at several sites and pertaining to the same area. A sistematic SSR evaluation has been conducted and tested by a cross validation procedure: the expected SSR at each validation site are in turn estimated by a weighted average of the SSR values measured at the other sites; the weights are properly set to account more for the sites with similar behavior in terms of the canonical correlation results between HVN and SSR. To evaluate the goodness of the estimation, we compared all the inferred and the original SSR, and we performed a critical analysis on the spectral characteristics of earthquake site response as recovered from noise measurements.279 51
