Barberi, Graziella
Preferred name
Barberi, Graziella
Email
graziella.barberi@ingv.it
Staff
staff
ORCID
78 results
Filters
Settings
The search returned 78 results
Now showing 1 - 10 of 78
- Some of the metrics are blocked by yourconsent settings
Item type:Publication, Access status: Open Access , Seismic and volcanic activity during 2014 in the region involved by TOMO-ETNA seismic active experiment
(2016); ; ; ; This paper presents an overview of the seismic and volcanic activity occurred during 2014 in the region involved by the TOMO-ETNA seismic active experiment (Mt. Etna, Aeolian Islands and Peloritani-Messina Strait areas). To better characterize the seismicity over the year, threedimensional hypocenter locations and focal mechanism solutions of a dataset of 678 selected small-to-moderate magnitude earthquakes (0.5≤ML≤4.3) were analyzed. In the framework of the TOMO-ETNA experiment, a temporary seismic network was installed on-land from June to November 2014, both to acquire seismic signals produced by shots and to record the local seismicity. Data collected by the temporary network were used to integrate those deriving from the permanent seismic network operated by the Istituto Nazionale di Geofisica e Vulcanologia (INGV)- Osservatorio Etneo, thus obtaining a numerically more robust dataset. In agreement with previous analysis and studies, the distribution of the hypocentral locations is well representative of the seismicity that typically characterizes this area. The selected well-constrained 42 fault plane solutions evidence two domains characterized by different motions and style of deformation. In particular, an extensional domain in the northeastern Sicily and a strike-slip regime in the northernmost part of the studied region have been observed.1323 366 - Some of the metrics are blocked by yourconsent settings
Item type:Publication, Access status: Open Access , Earthquake Rupture Forecasts for the MPS19 Seismic Hazard Model of Italy
In recent years, new approaches for developing earthquake rupture forecasts (ERFs) have been proposed to be used as an input for probabilistic seismic hazard assessment (PSHA). Zone- based approaches with seismicity rates derived from earthquake catalogs are commonly used in many countries as the standard for national seismic hazard models. In Italy, a single zone- based ERF is currently the basis for the official seismic hazard model. In this contribution, we present eleven new ERFs, including five zone-based, two smoothed seismicity-based, two fault- based, and two geodetic-based, used for a new PSH model in Italy. The ERFs were tested against observed seismicity and were subject to an elicitation procedure by a panel of PSHA experts to verify the scientific robustness and consistency of the forecasts with respect to the observations. Tests and elicitation were finalized to weight the ERFs. The results show a good response to the new inputs to observed seismicity in the last few centuries. The entire approach was a first attempt to build a community-based set of ERFs for an Italian PSHA model. The project involved a large number of seismic hazard practitioners, with their knowledge and experience, and the development of different models to capture and explore a large range of epistemic uncertainties in building ERFs, and represents an important step forward for the new national seismic hazard model.3092 170 - Some of the metrics are blocked by yourconsent settings
Item type:Publication, Access status: Open Access , The new earthquake locations and focal mechanisms catalogues for the western Ionian Sea, Italy
(Springer Nature London: Nature Publishing Group, 2026-03-05); ; ; ; The Ionian Sea hosts the last remnant of Tethyan oceanic lithosphere subducting beneath Calabria, where active deformation generates significant seismicity, including earthquakes exceeding magnitude 7. The main tectonic structures - the Ionian Fault system, the Alfeo–Etna Fault system, and the Malta Escarpment - accommodate African–Eurasian plate convergence and margin segmentation under a transtensional regime. Here we present two new datasets of 3D earthquake locations and focal mechanism solutions to constrain fault kinematics in the Ionian region. The first dataset includes 5,240 relocated small-magnitude earthquakes (0.7 ≤ ML ≤ 4.7) recorded between 1990 and 2019. Hypocentral locations were determined integrating travel-times data from land-based and seafloor seismic stations to improve spatial resolution. The second dataset comprises 421 new focal mechanism solutions (1.5 ≤ ML ≤ 4.7) for earthquakes occurring in the Ionian Sea and adjacent areas.25 75 - Some of the metrics are blocked by yourconsent settings
Item type:Publication, Access status: Open Access , Earthquake frequency-magnitude distribution at Mount Etna sheds light on magma ascent in the volcano’s plumbing system
(Washington, DC : American Association for the Advancement of Science, 2015-, 2025-10-10); ; ; ; Active volcanoes in densely populated areas are generally monitored through geological observations, geophysical, and geochemical data, which provide information on magma movement in the uppermost crust, allowing only short-term predictions of volcanic activity. However, deep magma recharge processes remain poorly understood. Here, we show that temporal variations in the slope of earthquake frequency-magnitude distribution (b value) at Mount Etna, a proxy for crustal stress changes, can track magma movements from deep to shallow crustal levels. Analyzing two decades of seismicity (2005–2024) across three crustal sectors, we distinguished magma recharge from the mantle, its transfer and storage at intermediate depths, and final ascent to the surface. Moreover, we found that b value time variations can precede geochemical anomalies from magma ascent and its eruption by a few months. Our results suggest that b value monitoring could have anticipated volcanic crises, supporting its integration into multiparametric surveillance systems for medium and long-term volcano monitoring.10 33 - Some of the metrics are blocked by yourconsent settings
Item type:Publication, Access status: Open Access , Geophysical multidisciplinary investigation of the structure of an unstable flank: the NE sector of Mt. Etna.
Mount Etna is characterized by a complex regional tectonics with a N-S compression related to the Africa – Europe convergence that interacts with a WNW-ESE extension associated to the Malta Escarpment. A general eastward motion is present in the eastern flank. Although the existence of these phenomena is overt, the geometry of the sliding sector is still debated. The non-uniqueness of the geophysical inverse models and the different limitations in resolution and sensitivity of each technique spurred us to undertake, in the frame of the MEDiterranean Supersites Volcanoes (MED-SUV) project, a joint interpretation of independent data in order to better constrain the results. Seismic data come from the network run by the Istituto Nazionale di Geofisica e Vulcanologia (INGV) – Osservatorio Etneo, Sezione di Catania. The relocated seismicity defines two main seismogenic volumes in the NE sector of the volcano: the first cluster is related to the known Pernicana Fault system, while the second one is located southwards, beneath the northern wall of the Valle del Bove. The resistivity models come from a MT survey carried out on the eastern flank of the volcano and consisting of thirty broad-band soundings along N-S and NW-SE oriented profiles. The resistivity modeling of MT profiles reveal three major layers in a resistive-conductive-resistive sequence. A low resistivity volume is clearly identified on the NE flank of the volcano, between The Pernicana fault and the northern wall of the Valle del Bove. Ground deformation studies (GPS and InSAR) revealed the segmentation of the unstable flank and define the NE sector as the most mobile one; this sector is perfectly bounded by the two seismic clusters and corresponds to the low resistivity volume. The sliding surface modeled by ground deformation data inversions well matches in depth with a resistivity transition and with two seismogenic layers.250 181 - Some of the metrics are blocked by yourconsent settings
Item type:Publication, Access status: Open Access , Seismic strain and seismogenic stress regimes in the crust of the southern Tyrrhenian region
(2003-08-01); ; ; ; Neri, G.; Dipartimento di Scienze della Terra, Università di Messina, ItalyAn investigation has been performed to identify and characterize the seismic deformation zones active over the last decades in the region of Italy that has experienced the strongest seismicity during the last centuries. The study is based on the estimate of hypocenter locations, fault plane solutions, seismogenic stress and seismic strain tensor orientations carried out using the entire dataset of the national and local seismic networks, and the recently improved three-dimensional (3D) crustal velocity model of the study area. A series of simulation tests have been performed to evaluate the significance of the earthquake space distribution obtained and whether it was influenced by network geometry problems related to the sea and the lack of ocean bottom seismometers. In the sectors where hypocentral location was synthetically proved to be reliable, space distributions of earthquakes located with epicenter and focal depth errors less than 3 and 4 km, respectively, have been compared with local geology in order to identify seismogenic faults. The dataset of 32 fault plane solutions estimated with fault parameter errors less than 20° has been used to investigate space variations of seismogenic stress and seismic strain orientations over the study area. Stress was found to be uniform in the Messina Strait and southern Calabria where inversion of the available set of 11 fault plane solutions showed clear evidence of an extensional regime. The different orientations of the minimum compressive stress and strain found in this sector, together with the information available on local geology and tectonics, lead us to propose that the seismicity occurring over the last decades in the Messina Strait and southern Calabria was not in general produced at the main faults, but at minor faults activated by the main tectonic stress field acting in the area. To the west, in the sector including western Etna, the Nebrodi chain and the western Aeolian Islands, analysis of the available set of 16 fault plane solutions revealed a certain degree of stress heterogeneity with an apparent prevalence of north–south compression. This east to west change of stress–strain regimes is evaluated in the light of current hypotheses regarding the geodynamics of the study region.208 481 - Some of the metrics are blocked by yourconsent settings
Item type:Publication, Access status: Open Access , Evidences of overlapping strain fields beneath the eastern flank of Mt. Etna volcano (Sicily, Italy) from seismic and geodetic data during 2003-2004
(2009-11-16); ; ; ; We carried out a study of the seismicity and ground deformation occurred on Mount Etna volcano after the end of 2002-2003 eruption and before the onset of 2004-2005 eruption, and recorded by the permanent local seismic network run by Istituto Nazionale di Geofisica e Vulcanologia - Sezione di Catania and by the geodetic surveys carried out in July 2003 and July 2004 on the GPS network. We provided a description of seismicity rate and main seismic swarms which occurred during the investigated period. Mostly of the earthquakes are clustered in two main clusters located on the north-eastern and south-eastern sectors of the volcano. In order to better understand the kinematic processes of the volcano, the 3D relocation were used to compute fault plane solutions and a selected dataset was inverted to determine stress and strain tensors. The focal solutions on the north-eastern sector show clear left-lateral kinematics along an E-W fault plane, in good agreement with the Pernicana fault kinematics. The focal solutions on the south-eastern sector show a main right-lateral kinematics along a NE-SW fault plane evidencing a roughly E-W oriented compression coupled with a N-S extension. Surface ground deformation affecting Mt Etna and measured by GPS surveys highlights a marked inflation during the same period, mainly visible on the western and upper sectors of the volcano; on the contrary, its eastern side shows an exceptionally strong seawards and downwards motion with displacements ranging from 5 up to 10 cm along the coastline. The 2D geodetic strain tensor distribution was calculated on a 1.5 km spaced grid, in order to detail the strain axes orientation above the entire GPS network. The results of the 2D geodetic strain calculation evidenced the very strong extension (mainly along an - ENE-WSW axis) of the summit area that was already considered as the cause of the 2004-2005 eruption; this main ENE-WSW extension continues throughout the eastern flank, but here coupled with a WNW-ESE contraction, meaning a right-lateral shear along a NW-SE oriented fault plane. The opposite deformation of the eastern sector of the volcano, as measured by seismicity and ground deformation has to be interpreted by considering the different depths of the two signals. Seismic activity along the south-eastern sector is, in fact, located between 3 and 8 km b.s.l. and it is then affected by the very strong additional E-W compression induced by the inflating source located by inverting GPS data just westwards and at the same depth. Ground deformation measured by GPS at the surface, on the contrary, is mainly affected by the shallower dynamics of the eastern flank, fastly moving towards East that produces an opposite (extension) E-W strain. It is also meaningful, confirming the decoupling between the surface and deep strain, that all the seismicity of the south-eastern sector lies beneath the sliding plane already modeled by geodetic data for the same time interval and for the 2004-2006 period and also beneath the deeper one previously modeled during the 1993-1998 period when the eastern flank velocity was much slower.142 98 - Some of the metrics are blocked by yourconsent settings
Item type:Publication, Access status: Open Access , Observing Etna volcano dynamics through seismic and deformation patterns
Geophysical data provide the chance to investigate a volcano's dynamics; considerable information can especially be gleaned on the stress and strain patterns accompanying the internal processes and the effect of magma ascent on the main structures triggering earthquakes. Here, we analysed in detail the seismicity recorded over the last two decades on Etna volcano (southern Italy), focusing on earthquakes distribution and focal mechanism clustering; the ground deformation pattern affecting the volcanic edifice with the inflation and deflation phases was also examined. Analysed data were compared in order to shed light on possible relationships with the volcanic activity and to better understand the internal dynamics of the volcano over time. Significant steps during or shortly before major eruptions in the seismic strain release and ground deformation temporal series highlight a straightforward relationship between seismicity occurring at shallow level, inflation/deflation and volcanism. Furthermore, at depths greater than 5-7 km, down to about 20 km, the orientation of the P- and T-axes clearly indicate the existence of a pressure source in the central part of the volcano. All the results underline that the stress field related to the volcano plumbing system interferes with the regional field, partly overriding it.73 50 - Some of the metrics are blocked by yourconsent settings
Item type:Publication, Access status: Open Access , Advances in VT earthquake locations at Mt Etna using new 3D velocity and attenuation models
(2009); ; ; ; In the last decade, several seismological studies of Mt Etna’s structure have been carried out using different tomographic techniques. The overall findings have provided valuable insights into the behavior of the volcano, as well as providing important information to model its dynamics during eruptions. In this paper we discuss the state of the art in recent studies, together with addressing their assumptions and limitations. Herein, we present new velocity and attenuation models by analyzing the seismicity preceding, and accompanying, the 2002-2003 flank eruption. The improvement in structural resolution from the increased number of seismic stations and quality of data are highlighted. Moreover, VP, VP/VS and QP are interpreted, thereby providing valuable constraints to the plumbing system of the volcano. Finally, we provide an improved description of the spatial distribution of the seismicity through accurate hypocentral locations obtained by applying the NonLinLoc probabilistic approach (Lomax et al., 2000) and the new 3D velocity model. All the studies carried out in the framework of the present project have led to important results and providing valuable and innovative tools for the future forecasting of Mt Etna volcanic activity and the mitigation of volcanic risk.192 274 - Some of the metrics are blocked by yourconsent settings
Item type:Publication, Access status: Open Access , Tomographic images and analysis of stress and strain tensors at Mt. Etna: the magmatic unrest leading to the 2008 Etna eruption
(2009-11-16); ; ; ; We analysed the seismic activity preceding and accompanying the onset of the 2008 Mt. Etna eruption. Since January 2008, a clear seismic evidence of a magmatic unrest of the volcano was observed. Seismicity was firstly located in the southwestern sector of the volcano, at depth ranging between 10 and 20 km, along two tectonic structures (NE-SW and NNW-SSE) usually associated with deeper magmatic recharge mechanisms (Figs. 1, 2). Afterwards, the seismicity was located along the shallower portions of the main structures of the northeastern and southern flanks of the volcano (Figs. 1, 2). On May 13, 2008 an intense seismic swarm (about 230 events in 7 hours) announced the beginning of the eruption (Fig. 1, white circles). In order to provide seismological constraints to the magmatic unrest of the volcano, 336 earthquakes recorded from January 2007 to May 2008 (magnitude greater than 1.0) were selected for stress and strain tensors computation and 3D velocity and attenuation structure determination. This in order to individuate possible stress variations caused by the activation of magmatic sources which can be well evidenced by 3D tomographic images.135 669
