Neri, Giancarlo
Preferred name
Neri, Giancarlo
Main Affiliation
23 results
The search returned 23 results
Now showing 1 - 10 of 23
- Some of the metrics are blocked by yourconsent settings
Item type:Publication, Access status: Open Access , New Insights into Long-Term Aseismic Deformation and Regional Strain Rates from GNSS Data Inversion: The Case of the Pollino and Castrovillari Faults
We present a novel inverse method for discriminating regional deformation and long-term fault creep by inversion of GNSS velocities observed at the spatial scale of intraplate faults by exploiting the different spatial signatures of these two mechanisms. In doing so our method provides a refined estimate of the upper bound of the strain accumulation process. As case study, we apply this method to a six year GNSS campaign (2003–2008) set up in the southern portion of the Pollino Range over the Castrovillari and Pollino faults. We show that regional deformation alone cannot explain the observed deformation pattern and implies high geodetic strain rate, with a WSW-ENE extension of 86±41×10−9/yr. Allowing for the possibility of fault creep, the modelling of GNSS velocities is consistent with their uncertainties and they are mainly explained by a shallow creep over the Pollino fault, with a normal/strike-slip mechanism up to 5 mm/yr. The regional strain rate decrease by about 70 percent and is characterized by WNW-ESE extension of 24±28×10−9/yr. The large uncertainties affecting our estimate of regional strain rate do not allow infering whether the tectonic regime of the area is extensional or strike-slip, although the latter is slightly more likely208 39 - Some of the metrics are blocked by yourconsent settings
Item type:Publication, Access status: Restricted , Present-day kinematics and deformation processes in the southern Tyrrhenian region: new insights on the northern Sicily extensional belt
We performed a new analysis of updated and accurate sets of seismic and GNSS data relative to the southern Tyrrhenian region. Detailed velocity field and crustal strain distribution coming from integration of episodic and continuous measurements at more than 160 geodetic sites (spanning the 1994-2015 period) have been evaluated together with the spatial distribution of recent seismicity and an updated catalogue of waveform inversion fault-plane solutions relative to the period 1976-2014. In agreement with previous investigations, we have found that the kinematics of the study area is quite homogeneous except for the north-eastern corner of Sicily which moves almost coherently with southern Calabria in response to the SE-ward rollback of the Ionian slab. The rest of the study region shows a NNW-trending velocity field in agreement with the direction of the Nubia-Eurasia convergence and it is mainly interested by a major compressive domain. NNW-oriented compression is particularly highlighted by seismic data along the E-W trending seismic belt located in the southern Tyrrhenian Sea. In the framework of such compressive regime, the E-W trending extensional domain of northern Sicily is also clearly depicted both by seismic and geodetic data. The cause of this extensional domain framed inside a mainly compressive one represents an open question in the recent scientific debate. Comparisons between our results and literature information on regional geology and crustal structure led us to investigate whether the extension could occur as local response to the thrusting dynamics of the southern Tyrrhenian belt, favoured by the presence of pre-existing weakness zones. We then propose a first attempt to evaluate such a possible causal relationship by means of Finite Element Method (FEM) and Coulomb Stress Change (CSC) modelling. In particular, we adopted a FEM approach to investigate the deformation pattern produced by thrust faulting of southern Tyrrhenian belt, along a 2D profile crossing both the compressive belt and the extensional one in northern Sicily. We also estimated the CSC due to the thrust faulting on normal receiving faults fairly reproducing pre-existing structures of northern Sicily. Modelling results indicate that the thrust faulting activity along the Southern Tyrrhenian compressive margin could be effective in promoting extensional processes in northern Sicily. We have so shown that the local response to thrust faulting activity may concur, even in combination with other processes, to generate the crustal stretching of northern Sicily.140 9 - Some of the metrics are blocked by yourconsent settings
Item type:Publication, Access status: Restricted , Active upper crust deformation pattern along the southern edge of the Tyrrhenian subduction zone (NE Sicily): Insights from a multidisciplinary approach
(2015-07-17); ; ; ; Using a multidisciplinary dataset based on gravimetric, seismic, geodetic and geological observations,we provide an improved picture of the shallow structure and dynamics of the southern edge of the Tyrrhenian subduction zone.With a local earthquake tomographywe clearly identify twomain crustal domains in the upper 15 kmcharacterized by different P-wave velocity values: a high-velocity domain comprising southeasternmost Tyrrhenian Sea, NE Sicily and Messina Straits, and a low-velocity domain comprising Mt. Etna and eastern Sicily. The transition between the two domains shows a good spatial correspondence with a wider set of faults including the Taormina Fault System (TFS) and the Aeolian–Tindari–Letojanni Fault System (ATLFS), two nearly SE-striking fault systems crossing northeastern Sicily and ending on the Ionian shoreline of Sicily according to many investigators. Within this set of faults, most of the deformation/seismicity occurs along the northern and central segments of ATLFS, compared to lowactivity along TFS. A lack of seismicity (both recent and historical) is observed in the southern sector of ATLFS where, however, geodetic data reveal significant deformation. Ourmultidisciplinary dataset including offshore observations suggests the southeastward continuation of the ATLFS into the Ionian Sea until joiningwith the faults cutting the Ionian accretionarywedge described in the recent literature. Our findings imply the existence of a highly segmented crustal shear zone extending from the Aeolian Islands to the Ionian Abyssal plain, that we believe plays the role of accommodating differential motion between the Southern Tyrrhenian unit and the western compressional domain of Sicily. The ATLFS, which is a main part of the inferred shear zone, behaves similarly to what often observed at the edges of retreating subduction346 81 - Some of the metrics are blocked by yourconsent settings
Item type:Publication, Access status: Restricted , The Ongoing Seismic Sequence at the Pollino Mountains, Italy
(2013-11); ; ; ; A sequence of thousands of small to moderate earthquakes has been occurring since spring 2010 in the Pollino Mountains area, southern Italy, where a seismic gap was previously hypothesized by paleoseismological evidence associated with the lack of major earthquakes in historical catalogs.245 30 - Some of the metrics are blocked by yourconsent settings
Item type:Publication, Access status: Open Access , Seismicity and Focal Mechanisms at the Calabro-Lucanian boundary along the Apennine chain (southern Italy)
(2012); ; ; ; The Calabro-Lucanian boundary is a complex geological zone marking the transition between the highly seismogenic tectonic domains of Southern Apennines and the Calabrian Arc. Historical catalogues include earthquakes with macroseismic effects up to VII-VIII MCS (CPTI WORKING GROUP, 2004) and paleoseismological investigations suggested that earthquakes of magnitude between 6.5 and 7 may have occurred in this area, between the 6th and the 15th century (MICHETTI et alii, 2000). More recently, on 9 September 1998, an earthquake of moment magnitude M5.6 occurred at the north-western margin of the Pollino massif (GUERRA et alii, 2005; ARRIGO et alii, 2006) and since the second half of 2010 the same region was interested by a noteworthy seismic activity characterized by several swarms with thousands of events with a maximum magnitude of 3.6.208 394 - Some of the metrics are blocked by yourconsent settings
Item type:Publication, Access status: Restricted , Seismological contribution to STEP fault detection in the Calabian subduction zone, south Italy
(2012); ; ; ; The Calabrian Arc system (southern Italy) is characterized by the presence of the southeast-ward retreating Ionian slab subducting beneath the southern Tyrrhenian region. Recent intermediate tomographies indicated that the Ionian slab is continuous in depth beneath the central part of the Arc (central Calabria-Messina Straits), while detachment of the deep portion of the subducting structure may have already taken place beneath the edges of the Arc itself (southern Apennines and Sicilian Maghrebides). Geophysical investigations, including seismic tomography, gravity analyses, earthquake and geologic data, led us to better identify the transitional zones between different subduction modes in correspondence of the NWtrending seismogenic faults of Tindari and Crotone Basin, respectively. According to the model introduced by GOVERS & WORTEL (2005) and adopted also by other investigators for describing the dynamics at the borders of retreating subduction slabs, we suggested that these seismogenic faults may work as Subduction-Transform Edge Propagator (STEP) faults in the Calabrian subduction system. In order to investigate these STEP fault zones, we have applied in the present study the waveform inversion method known as Cut And Paste (ZHAO & HELMBERGER, 1994; ZHU & HELMBERGER, 1996) for computation of seismic moment, depth and focal mechanism of earthquakes with magnitude greater or equal to 3 occurred in the Calabrian Arc region between 2004 and 2011.203 30 - Some of the metrics are blocked by yourconsent settings
Item type:Publication, Access status: Restricted , How lithospheric subduction changes along the Calabrian Arc in southern Italy: geophysical evidences
Recent tomographic investigations performed down to ~300 km depth in the Calabrian Arc region gave insight in favor of the hypothesis that the Ionian subducting slab is continuous in depth beneath the central part of the Arc, while detachment of the deep portion of the subducting structure may have already taken place beneath the edges of the Arc itself. In the present study, we perform new geophysical analyses to further explore the structure of the subduction system and the structure and kinematics of the crustal units in the study area for a more comprehensive view of the local geodynamic scenario. Local earthquake tomography that we address to the exploration of the upper 40 km in the whole region of southern Italy furnishes P-wave velocity domains, suggesting southeast-ward long-term drifting of the southern Tyrrhenian unit with an advancement front matching well with the segment of Calabrian Arc where the subducting slab was found continuous and trench retreat can be presumed to have been active in the most recent times. This scenario of retreating subduction trench inducing drifting of the lithospheric unit overriding the subducting slab is further supported by the analysis of gravity anomalies, allowing us to better constrain the transitional zones between different subduction modes (continuous vs. detached slab) along the Arc. Also, the relocation of recent crustal seismicity, associated with geostructural data taken from the literature, provides evidence for NW-trending seismogenic structures in northeastern Sicily and northern Calabria that we interpret as Subduction-Transform Edge Propagator (STEP) faults guiding the southeast-ward drifting process of the southern Tyrrhenian unit. Crustal earthquake relocations show also seismolineaments in southern Calabria corresponding to the NE-trending longitudinal structures of the Arc where the great shallow earthquakes of 28 December 1908, and 5 and 7 February 1783 occurred. Seismicity and the extensional stress regime detected in these structures find also reasonable location in the proposed scenario, being interpretable in terms of shallow response of the central segment of the Arc to slab rollback and trench retreat.73 3 - Some of the metrics are blocked by yourconsent settings
Item type:Publication, Access status: Open Access , Recent tectonic reorganization of the Nubia-Eurasia convergent 2 boundary heading for the closure of the western Mediterranean
(2011-01); ; ; ; : In the western Mediterranean area, after a long period (late Paleogene-Neogene) of Nubian northward subduction beneath Eurasia, subduction is almost ceased as well as convergence accommodation in the subduction zone. With the progression of Nubia-Eurasia convergence, a tectonic reorganization is therefore necessary to accommodate future contraction. Previously-published tectonic, seismological, geodetic, tomographic, and seismic reflection data (integrated by some new GPS velocity data) are reviewed to understand the reorganization of the convergent boundary in the western Mediterranean. Between northern Morocco, to the west, and northern Sicily, to the east, contractional deformation has shifted from the former subduction zone to the margins of the two backarc oceanic basins (Algerian-Liguro-Provençal and Tyrrhenian basins) and it is now active in the south-Tyrrhenian (northern Sicily), northern Liguro-Provençal, Algerian, and Alboran (partly) margins. Compression and basin inversion has propagated in a scissor-like manner from the Alboran (c. 8 Ma) to the Tyrrhenian (younger than c. 2 Ma) basins following a similar propagation of the subduction cessation and slab breakoff, i.e., older to the west and younger to the east. It follows that basin inversion is rather advanced in the Algerian margin, where a new southward subduction seems to be in its very infant stage, while it has still to properly start in the Tyrrhenian margin, where contraction has resumed at the rear of the fold-thrust belt and may soon invert the Marsili oceanic basin. GPS-derived strain rates higher in the Tyrrhenian margin than in the Algerian boundary suggest that this latter manner of contraction accommodation (contraction resumption at the rear of the orogenic wedge) is more efficient than subduction inception and basin inversion along newly-generated reverse faults (Algeria), but the differential strain rates may also be explained with the heterogeneous distribution of GPS stations. Part of the contractional deformation may have shifted toward the north in the Liguro-Provençal basin possibly because of its weak rheological properties compared with the area between Tunisia and Sardinia, where no oceanic crust occurs and seismic deformation is absent or limited compared with the adjacent strands of the Nubia-Eurasia boundary. The tectonic reorganization of the Nubia-Eurasia boundary in the study area is still strongly controlled by the inherited tectonic fabric and rheological attributes, which are both discontinuous and non-cylindrical along the boundary. These features prevent, at present, the development of long and continuous thrust faults. In an extreme and approximate synthesis, the evolution of the western Mediterranean is inferred as being similar to a Wilson Cycle in the following main steps: (1) northward Nubian subduction with Mediterranean backarc extension (since ~35 Ma); (2) progressive cessation, from west to east, of Nubian main subduction (since ~15 Ma); (3) progressive compression, from west to east, in the former backarc domain and consequent basin inversion (since ~8-10 Ma); (4) possible future subduction of former backarc basins.562 1558 - Some of the metrics are blocked by yourconsent settings
Item type:Publication, Access status: Open Access , Testing the stability of moment tensor solutions for small earthquakes in the Calabro-Peloritan Arc region (southern Italy)
(2011); ; ; ; The aim of this study is to test the stability of moment tensor solutions for crustal earthquakes in the Calabro-Peloritan area (southern Italy). We used waveforms recorded by the Italian National Seismic Network managed by the Istituto Nazionale di Geofisica e Vulcanologia and the CAT-SCAN (Calabria Apennine Tyrrhenian - Subduction Collision Accretion Network) project. We computed the moment tensor solutions using the Cut And Paste (CAP) method. The technique allows the determination of the source depth, moment magnitude and focal mechanisms using a grid search technique. For the earthquakes investigated, we tried different station distributions and different velocity models. Results were also checked by computing the moment tensor solutions using the SLUMT grid-search method. Both methods (CAP and SLUMT) allow time shifts between synthetic and observed data in order to reduce the dependence of the solution on the assumed velocity model and on earthquake location errors. Comparisons have been made with the available published solutions. The final focal mechanisms were robustly determined. We show that the application of the CAP and SLUMT methods can provide good-quality solutions in a magnitude range not properly represented in the Italian national earthquake catalogues, and where the solutions estimated from Ponset polarities are often poorly constrained.345 882 - Some of the metrics are blocked by yourconsent settings
Item type:Publication, Access status: Restricted , Imaging the velocity structure of the Calabrian Arc region (southern Italy) through the integration of different seismological data
(2011); ; ; ; We present a new 3D, P-wave velocity model of the crust and upper lithosphere for the Calabrian Arc region. The model results from integration of different types of seismic velocity data available in the literature, following a method conceptually similar to one that has been successfully applied in the Alpine region. The model obtained, clearly shows the first-order structural features of the area, in agreement with the complex puzzle of lithospheric units. It also has the advantage of representing the simplest velocity structure that is consistent with all published data. We then employed this “apriori” velocity model as starting model for a local earthquake tomography. The velocity pattern obtained furnishes new information on the relationships between deep dynamics related to the Ionian subduction system and processes occurring at crustal depths. In addition, also the low RMS values coming from hypocenter locations indicate an improvement with respect to 3D models already available and to tomographic results obtained by testing different starting velocity models.145 28
