Skip to main content
The search returned 22 results
Now showing 1 - 10 of 22
  • Some of the metrics are blocked by your 
    Item type:Publication,

    Volcanic cloud detection using Sentinel-3 satellite data by means of neural networks: the Raikoke 2019 eruption test case

    Accurate automatic volcanic cloud detection by means of satellite data is a challenging task and is of great concern for both the scientific community and aviation stakeholders due to well-known issues generated by strong eruption events in relation to aviation safety and health impacts. In this context, machine learning techniques applied to satellite data acquired from recent spaceborne sensors have shown promising results in the last few years. This work focuses on the application of a neural-network-based model to Sentinel-3 SLSTR (Sea and Land Surface Temperature Radiometer) daytime products in order to detect volcanic ash plumes generated by the 2019 Raikoke eruption. A classification of meteorological clouds and of other surfaces comprising the scene is also carried out. The neural network has been trained with MODIS (Moderate Resolution Imaging Spectroradiometer) daytime imagery collected during the 2010 Eyjafjallajökull eruption. The similar acquisition channels of SLSTR and MODIS sensors and the comparable latitudes of the eruptions permit an extension of the approach to SLSTR, thereby overcoming the lack in Sentinel-3 products collected in previous mid- to high-latitude eruptions. The results show that the neural network model is able to detect volcanic ash with good accuracy if compared to RGB visual inspection and BTD (brightness temperature difference) procedures. Moreover, the comparison between the ash cloud obtained by the neural network (NN) and a plume mask manually generated for the specific SLSTR images considered shows significant agreement, with an F-measure of around 0.7. Thus, the proposed approach allows for an automatic image classification during eruption events, and it is also considerably faster than time-consuming manual algorithms. Furthermore, the whole image classification indicates the overall reliability of the algorithm, particularly for recognition and discrimination between volcanic clouds and other objects.
      69  140
  • Some of the metrics are blocked by your 
    Item type:Publication, Access status: Open Access ,

    Volcanic Clouds Characterization of the 2020–2022 Sequence of Mt. Etna Lava Fountains Using MSG-SEVIRI and Products’ Cross-Comparison

    From December 2020 to February 2022, 66 lava fountains (LF) occurred at Etna volcano (Italy). Despite their short duration (an average of about two hours), they produced a strong impact on human life, environment, and air traffic. In this work, the measurements collected from the Spinning Enhanced Visible and InfraRed Imager (SEVIRI) instrument, on board Meteosat Second Generation (MSG) geostationary satellite, are processed every 15 min to characterize the volcanic clouds produced during the activities. In particular, a quantitative estimation of volcanic cloud top height (VCTH) and ash/ice/SO2 masses’ time series are obtained. VCTHs are computed by integrating three different retrieval approaches based on coldest pixel detection, plume tracking, and HYSPLIT models, while particles and gas retrievals are realized simultaneously by exploiting the Volcanic Plume Retrieval (VPR) real-time procedure. The discrimination between ashy and icy pixels is carried out by applying the Brightness Temperature Difference (BTD) method with thresholds obtained by making specific Radiative Transfer Model simulations. Results indicate a VCTH variation during the entire period between 4 and 13 km, while the SO2, ash, and ice total masses reach maximum values of about 50, 100, and 300 Gg, respectively. The cumulative ash, ice, and SO2 emitted from all the 2020–2022 LFs in the atmosphere are about 750, 2300, and 670 Gg, respectively. All the retrievals indicate that the overall activity can be grouped into 3 main periods in which it passes from high (December 2020 to March 2021), low (March to June 2021), and medium/high (June 2021 to February 2022). The different products have been validated by using TROPOspheric Monitoring Instrument (TROPOMI) polar satellite sensor, Volcano Observatory Notices for Aviation (VONA) bulletins, and by processing the SEVIRI data considering a different and more accurate retrieval approach. The products’ cross-comparison shows a generally good agreement, except for the SO2 total mass in case of high ash/ice content in the volcanic cloud.
      79  193
  • Some of the metrics are blocked by your 
    Item type:Publication, Access status: Open Access ,

    Applications of Ground-Based Infrared Cameras for Remote Sensing of Volcanic Plumes

    Ground-based infrared cameras can be used effectively and safely to provide quantitative information about small to moderate-sized volcanic eruptions. This study describes an infrared camera that has been used to measure emissions from the Mt. Etna and Stromboli (Sicily, Italy) volcanoes. The camera provides calibrated brightness temperature images in a broadband (8–14 µm) channel that is used to determine height, plume ascent rate and volcanic cloud/plume temperature and emissivity at temporal sampling rates of up to 1 Hz. The camera can be operated in the field using a portable battery and includes a microprocessor, data storage and WiFi. The processing and analyses of the data are described with examples from the field experiments. The updraft speeds of the small eruptions at Stromboli are found to decay with a timescale of ∼10 min and the volcanic plumes reach thermal equilibrium within ∼2 min. A strong eruption of Mt. Etna on 1 April 2021 was found to reach ∼9 km, with ascent speeds of 10–20 ms−1. The plume, mostly composed of the gases CO2, water vapour and SO2, became bent over by the prevailing winds at high levels, demonstrating the need for multiple cameras to accurately infer plume heights.
      34  137
  • Some of the metrics are blocked by your 
    Item type:Publication, Access status: Open Access ,

    Proximal Monitoring of the 2011–2015 Etna Lava Fountains Using MSG-SEVIRI Data

    From 2011 to 2015, 49 lava fountains occurred at Etna volcano. In this work, the measurements carried out from the Spinning Enhanced Visible and InfraRed Imager (SEVIRI) instrument, on board the Meteosat Second Generation (MSG) geostationary satellite, are processed to realize a proximal monitoring of the eruptive activity for each event. The SEVIRI measurements are managed to provide the time series of start and duration of eruption and fountains, Time Averaged Discharge Rate (TADR) and Volcanic Plume Top Height (VPTH). Due to its temperature responsivity, the eruptions start and duration, fountains start and duration and TADR are realized by exploiting the SEVIRI 3.9 m channel, while the VPTH is carried out by applying a simplified procedure based on the SEVIRI 10.8 m brightness temperature computation. For each event, the start, duration and TADR have been compared with ground-based observations. The VPTH time series is compared with the results obtained from a procedures-based on the volcanic cloud center of mass tracking in combination with the Hybrid Single-Particle Lagrangian Integrated Trajectory (HYSPLIT) back-trajectories. The results indicate that SEVIRI is generally able to detect the start of the lava emission few hours before the ground measurements. A good agreement is found for both the start and the duration of the fountains and the VPTH with mean differences of about 1 h, 50 min and 1 km respectively.
      673  137
  • Some of the metrics are blocked by your 
    Item type:Publication,

    Tropospheric Volcanic SO2 Mass and Flux Retrievals from Satellite. The Etna December 2018 Eruption

    The presence of volcanic clouds in the atmosphere affects air quality, the environment, climate, human health and aviation safety. The importance of the detection and retrieval of volcanic SO2 lies with risk mitigation as well as with the possibility of providing insights into the mechanisms that cause eruptions. Due to their intrinsic characteristics, satellite measurements have become an essential tool for volcanic monitoring. In recent years, several sensors, with different spectral, spatial and temporal resolutions, have been launched into orbit, significantly increasing the effectiveness of the estimation of the various parameters related to the state of volcanic activity. In this work, the SO2 total masses and fluxes were obtained from several satellite sounders—the geostationary (GEO) MSG-SEVIRI and the polar (LEO) Aqua/Terra-MODIS, NPP/NOAA20-VIIRS, Sentinel5p-TROPOMI, MetopA/MetopB-IASI and Aqua-AIRS—and compared to one another. As a test case, the Christmas 2018 Etna eruption was considered. The characteristics of the eruption (tropospheric with low ash content), the large amount of (simultaneously) available data and the different instrument types and SO2 columnar abundance retrieval strategies make this cross-comparison particularly relevant. Results show the higher sensitivity of TROPOMI and IASI and a general good agreement between the SO2 total masses and fluxes obtained from all the satellite instruments. The differences found are either related to inherent instrumental sensitivity or the assumed and/or calculated SO2 cloud height considered as input for the satellite retrievals. Results indicate also that, despite their low revisit time, the LEO sensors are able to provide information on SO2 flux over large time intervals. Finally, a complete error assessment on SO2 flux retrievals using SEVIRI data was realized by considering uncertainties in wind speed and SO2 abundance.
      131  132
  • Some of the metrics are blocked by your 
    Item type:Publication, Access status: Open Access ,

    Multi-Sensor Analysis of a Weak and Long-Lasting Volcanic Plume Emission

    Volcanic emissions are a well-known hazard that can have serious impacts on local populations and aviation operations. Whereas several remote sensing observations detect high-intensity explosive eruptions, few studies focus on low intensity and long-lasting volcanic emissions. In this work, we have managed to fully characterize those events by analyzing the volcanic plume produced on the last day of the 2018 Christmas eruption at Mt. Etna, in Italy. We combined data from a visible calibrated camera, a multi-wavelength elastic/Raman Lidar system, from SEVIRI (EUMETSAT-MSG) and MODIS (NASA-Terra/Aqua) satellites and, for the first time, data from an automatic sun-photometer of the aerosol robotic network (AERONET). Results show that the volcanic plume height, ranging between 4.5 and 6 km at the source, decreased by about 0.5 km after 25 km. Moreover, the volcanic plume was detectable by the satellites up to a distance of about 400 km and contained very fine particles with a mean e ective radius of about 7 m. In some time intervals, volcanic ash mass concentration values were around the aviation safety thresholds of 2 10􀀀3 g m􀀀3. Of note, Lidar observations show two main stratifications of about 0.25 km, which were not observed at the volcanic source. The presence of the double stratification could have important implications on satellite retrievals, which usually consider only one plume layer. This work gives new details on the main features of volcanic plumes produced during low intensity and long-lasting volcanic plume emissions.
      495  238
  • Some of the metrics are blocked by your 
    Item type:Publication, Access status: Open Access ,

    Fine Tuning Eruption Source Parameters to Improve Ash Dispersion Simulations: An Example From Eyjafjallajökull 2010

    (Hoboken, NJ : John Wiley & Sons, [2013]-, 2025-12-11) ; ; ; ;
    Volcanic ash dispersion simulations and remote sensing of ash clouds are conducted by volcano observatories and Volcanic Ash Advisory Centres to monitor and forecast the evolution of volcanic ash clouds in space and time in order to mitigate the risk posed by these events on civil aviation. Despite constant improvements in terms of technology and modern capabilities, both numerical simulations and monitoring are still affected by variable degrees of uncertainty. To initialize the rate of emission and position of the volcanic ash in the ash dispersion simulation computational domain of the numerical model used for forecasting the ash clouds, in particular, currently relies on the preliminary simulation of the volcanic plume. The source modeling is generally carried out using simplified plume models that depends on parameters that cannot be accurately measured in real time, for example, the wind entrainment coefficient and the plume centerline height in case of wind affected (bent-over) plumes. In this work, we test recently proposed correction factors for these parameters for two of the most widely used simplified plume models and compare with ash cloud satellite observations retrieved during the Eyjafjallajökull eruption. Specifically, we compare modeling results obtained with and without applying the corrections of the top plume height and wind entrainment coefficient. We show that, by applying the corrections, we significantly reduce the discrepancy between the simulated and satellite-retrieved ash cloud observations.
      9  20
  • Some of the metrics are blocked by your 
    Item type:Publication, Access status: Open Access ,

    A novel simplified ground-based thermal infrared (TIR) system for volcanic plume geometry, SO<sub>2</sub> columnar abundance, and flux retrievals

    (Göttingen: Copernicus Publications, 2025-10-14) ; ; ; ;
    In the last few decades, volcanic monitoring using remote sensing systems has become an essential tool to investigate the effects of volcanic activity on environment, climate, human health, and aviation, as well as to give insights into volcanic processes. Compared to satellite measurements, ground-based instruments offer continuous spatial and temporal coverage capable of providing highresolution and high-sensitivity data. This work presents a new simplified prototype of a thermal infrared (TIR) system (named “VIRSO2”). The instrument comprises three cameras, one working in the visible spectrum and two in the TIR (8–14 μm). In front of one of the two TIR cameras, an 8.7 μm filter is placed. The system is designed for the detection of volcanic emission, geometry estimation, determining the columnar content of SO2 and ash, and SO2 flux retrievals. The retrieval procedures developed are detailed starting from the geometric characterisation with wind direction correction, the calibration by considering the effects of filter multireflections and temperature, and the SO2 mass by exploiting MODTRAN radiative transfer model (RTM) simulations. The SO2 flux is then computed by applying the traverse method, with the plume speed obtained from the wind speed at the crater altitude. As test cases, the measurements collected at Etna Volcano (Italy) on 1 April 2021 during a lava fountain episode and 30 August 2024 during a quiescent phase have been considered. The results show that the system can provide reliable information on plume detection, altitude, and SO2 flux. Its simplicity, its low cost, and the possibility of carrying out measurements at a safe distance from the vent during both the day and the night make this system ideal for realtime monitoring of volcanic emissions, thus helping to provide information on the state of activity of the volcano and therefore to mitigate the effect that these natural phenomena have on humans and the environment.
      7  29
  • Some of the metrics are blocked by your 
    Item type:Publication, Access status: Open Access ,

    The Christmas 2018 Etna Eruption: Real Time Monitoring Using Geostationary and Polar Orbit Satellites Systems and Products Validation

    In this work data observed by the geostationary MSG-SEVIRI and the polar NASA-Terra/Aqua-MODIS orbiting satellite instruments, have been used for the proximal and distal monitoring of the 24-30 December 2018 Etna eruption. The combined use of the SEVIRI high repetition time and the MODIS high spatial resolution allows a reliable near real time volcanic characterization from the source to the atmosphere. For the proximal monitoring the parameters estimated are the eruption starts and duration and the volcanic plume top height, while the distal monitoring was inverted relying on the determination of the volcanic cloud altitude and the ash/SO 2 retrievals. Achieved products were validated by comparing these results with those observed remotely by ground based networks.Results obtained in this study show the ability of satellite-based systems to entirely follow eruptive events in near real time, offering a powerful tool to mitigate volcanic risk on both local population and airspace.
      48  135