Prestifilippo, Michele
Preferred name
Prestifilippo, Michele
Email
michele.prestifilippo@ingv.it
Other Emails
michele.prestifilippo@ingv.it
Staff
staff
ORCID
51 results
Filters
Settings
The search returned 51 results
Now showing 1 - 10 of 51
- Some of the metrics are blocked by yourconsent settings
Item type:Publication, Access status: Open Access , Etna_NETVIS: A dedicated tool for automatically pre-processing high frequency data useful to extract geometrical parameters and track the evolution of the lava field
(Geophysical Research Abstracts, 2016-04-17); ; ; ; In order to improve the observation capability in one of the most active volcanic areas in the world, Mt. Etna, we developed a processing method to use the surveillance cameras for a quasi real-time mapping of syn-eruptive processes. Following an evaluation of the current performance of the Etna permanent ground NEtwork of Thermal and Visible Sensors (Etna_NETVIS), its possible implementation and optimization was investigated to determine the locations of additional observation sites to be rapidly set up during emergencies. A tool was then devised to process time series of ground-acquired images and extract a coherent multi-temporal dataset of georeferenced map. The processed datasets can be used to extract 2D features such as evolution maps of active lava flows. The tool was validated on ad-hoc test fields and then adopted to map the evolution of two recent lava flows. The achievable accuracy (about three times the original pixel size) and the short processing time makes the tool suitable for rapidly assessing lava flow evolutions, especially in the case of recurrent eruptions, such as those of the 2011–2015 Etna activity. The tool can be used both in standard monitoring activities and during emergency phases (eventually improving the present network with additional mobile stations) when it is mandatory to carry out a quasi-real-time mapping to support civil protection actions. The developed tool could be integrated in the control room of the Osservatorio Etneo, thus enabling the Etna_NETVIS for mapping purposes and not only for video surveillance.107 201 - Some of the metrics are blocked by yourconsent settings
Item type:Publication, Access status: Open Access , 187 230 - Some of the metrics are blocked by yourconsent settings
Item type:Publication, Access status: Restricted , Probabilistic Reasoning Over Seismic Time Series: Volcano Monitoring by Hidden Markov Models at Mt. Etna
(2016-04-13); ; ; ; From January 2011 to December 2015, Mt. Etna was mainly characterized by a cyclic eruptive behavior with more than 40 lava fountains from New South-East Crater. Using the RMS (Root Mean Square) of the seismic signal recorded by stations close to the summit area, an automatic recognition of the different states of volcanic activity (QUIET, PRE-FOUNTAIN, FOUNTAIN, POSTFOUNTAIN) has been applied for monitoring purposes. Since values of the RMS time series calculated on the seismic signal are generated from a stochastic process, we can try to model the system generating its sampled values, assumed to be a Markov process, using Hidden Markov Models (HMMs). HMMs analysis seeks to recover the sequence of hidden states from the observations. In our framework, observations are characters generated by the Symbolic Aggregate approXimation (SAX) technique, which maps RMS time series values with symbols of a pre-defined alphabet. The main advantages of the proposed framework, based on HMMs and SAX, with respect to other automatic systems applied on seismic signals at Mt. Etna, are the use of multiple stations and static thresholds to well characterize the volcano states. Its application on a wide seismic dataset of Etna volcano shows the possibility to guess the volcano states. The experimental results show that, in most of the cases, we detected lava fountains in advance.918 17 - Some of the metrics are blocked by yourconsent settings
Item type:Publication, Access status: Open Access , 298 334 - Some of the metrics are blocked by yourconsent settings
Item type:Publication, Access status: Open Access , A Dynamic Bayesian Network for Mt. Etna Volcano State Assessment
(2015-04-17); ; ; ; Nowadays, the real-time monitoring of Mt. Etna volcano is mostly delegated to one or more human experts in volcanology, who interpret the data coming from different kind of monitoring networks. Among their duties, the evaluation of the volcano state is one of the most critical task for civil protection purposes. Unfortunately, the coupling of highly non-linear and complex volcanic dynamic processes leads to measurable effects that can show a large variety of different behaviors. Moreover, due to intrinsic uncertainties and possible failures in some recorded data the volcano state needs to be expressed in probabilistic terms, thus making the fast volcano state assessment sometimes impracticable for the personnel on duty at the 24h control room. With the aim of aiding the personnel on duty in volcano monitoring, here we present an expert system approach based on Bayesian networks to estimate automatically the ongoing volcano state from all the available different kind of measurements. A Bayesian network is a static probabilistic graphical model that represents a set of random variables and their conditional dependencies via a directed acyclic graph. We consider model variables both the measurements and the possible states of the volcano. In order to include the time in the model, we use a Dynamic Bayesian Network (DBN) which relates variables to each other over adjacent time steps. The model output consists of an estimation of the probability distribution of the feasible volcano states. We build the model by considering the long record of data from 2011 to 2014 and we cross-validate it by considering 3 years for parameter estimation and 1 year for testing in simulated real-time mode.239 183 - Some of the metrics are blocked by yourconsent settings
Item type:Publication, Access status: Open Access , Monitoring and forecasting Etna volcanic plumes
(2009-09-23); ; ; ; In this paper we describe the results of a project ongoing at the Istituto Nazionale di Geofisica e Vulcanologia (INGV). The objective is to develop and implement a system for monitoring and forecasting volcanic plumes of Etna. Monitoring is based at present by multispectral infrared measurements from the Spin Enhanced Visible and Infrared Imager on board the Meteosat Second Generation geosynchronous satellite, visual and thermal cameras, and three radar disdrometers able to detect ash dispersal and fallout. Forecasting is performed by using automatic procedures for: i) downloading weather forecast data from meteorological mesoscale models; ii) running models of tephra dispersal, iii) plotting hazard maps of volcanic ash dispersal and deposition for certain scenarios and, iv) publishing the results on a web-site dedicated to the Italian Civil Protection. Simulations are based on eruptive scenarios obtained by analysing field data collected after the end of recent Etna eruptions. Forecasting is, hence, supported by plume observations carried out by the monitoring system. The system was tested on some explosive events occurred during 2006 and 2007 successfully. The potentiality use of monitoring and forecasting Etna volcanic plumes, in a way to prevent threats to aviation from volcanic ash, is finally discussed.502 539 - Some of the metrics are blocked by yourconsent settings
Item type:Publication, Access status: Restricted , A Multi-Sensor Approach for Volcanic Ash Cloud Retrieval and Eruption Characterization: The 23 November 2013 Etna Lava Fountain
(2016); ; ; ; Volcanic activity is observed worldwide with a variety of ground and space-based remote sensing instruments, each with advantages and drawbacks. No single system can give a comprehensive description of eruptive activity, and so, a multi-sensor approach is required. This work integrates infrared and microwave volcanic ash retrievals obtained from the geostationary Meteosat Second Generation (MSG)-Spinning Enhanced Visible and Infrared Imager (SEVIRI), the polar-orbiting Aqua-MODIS and ground-based weather radar. The expected outcomes are improvements in satellite volcanic ash cloud retrieval (altitude, mass, aerosol optical depth and effective radius), the generation of new satellite products (ash concentration and particle number density in the thermal infrared) and better characterization of volcanic eruptions (plume altitude, total ash mass erupted and particle number density from thermal infrared to microwave). This approach is the core of the multi-platform volcanic ash cloud estimation procedure being developed within the European FP7-APhoRISM project. The Mt. Etna (Sicily, Italy) volcano lava fountaining event of 23 November 2013 was considered as a test case. The results of the integration show the presence of two volcanic cloud layers at different altitudes. The improvement of the volcanic ash cloud altitude leads to a mean difference between the SEVIRI ash mass estimations, before and after the integration, of about the 30%. Moreover, the percentage of the airborne “fine” ash retrieved from the satellite is estimated to be about 1%–2% of the total ash emitted during the eruption. Finally, all of the estimated parameters (volcanic ash cloud altitude, thickness and total mass) were also validated with ground-based visible camera measurements, HYSPLIT forward trajectories, Infrared Atmospheric Sounding Interferometer (IASI) satellite data and tephra deposits.376 8 - Some of the metrics are blocked by yourconsent settings
Item type:Publication, Access status: Open Access , Ristrutturazione e potenziamento delle stazioni Video di Stromboli
(2010-11-05); ; ; ; Pecora, E.; Istituto Nazionale di Geofisica e Vulcanologia, Sezione Catania, Catania, Italia113 138 - Some of the metrics are blocked by yourconsent settings
Item type:Publication, Access status: Restricted , A statistical approach to evaluate the tephra deposit and ash concentration from PUFF model forecasts
(2011-03-01); ; ; ; Scollo, S.; Istituto Nazionale di Geofisica e Vulcanologia, Sezione Catania, Catania, ItaliaIn this paper we present a new statistical approach which provides tephra deposit load and ash concentration using PUFF, a Lagrangian model widely used to forecast volcanic ash dispersal during volcanic crisis. We perform a parametric study in order to analyze the influence of each input parameter on model outputs. For this test, we simulate two eruptive scenarios similar to the 2001 (Scenario 1) and 1998 (Scenario 2) Etna eruptions using high resolution weather data and a domain of 170×170 km. Results show that for both scenarios, we are able to calculate the tephra deposit load and ash concentration but the use of millions of particles is required. Specifically, up to 33 and 220 millions of particles were necessary to accurately predict the tephra deposit and ash concentration in air, respectively. This is approximately two orders of magnitude larger than the values typically considered running PUFF. The parametric study shows that the horizontal diffusion coefficient, the time step of the simulations, the topography and the standard deviation of the particle distribution greatly affect the model outputs. We also validate the model by best-fit procedures. Results show a good comparison between field data of the 2001 Etna eruption and PUFF simulations, being inside 5 and 1/5 times the observed data, comparable with results of Eulerian models. This work will allow to reliably outline the areas of contaminated airspace using PUFF or any other Lagrangian model in order to define the No Fly Zone and ensure the safety aviation operations as required after the Eyjafjallajökull eruption229 21 - Some of the metrics are blocked by yourconsent settings
Item type:Publication, Access status: Open Access , Implementazione di una nuova procedura per caratterizzare la forma di particelle mediante misure al CAMSIZER e algoritmi di clustering
In this work we present the calibration phase of a new procedure for the characterization of the shape of pyroclastic particles. This research has been granted by INGV of Catania, with funds deriving from the “Progetto Giovani”, in collaboration with Retsch Technology in Haan. The innovation of this procedure arises from the use of CAMSIZER (an instrument developed by the German leader company). This instrument permits to obtain very important information both on size and shape parameters of a high number of particles (hundreds of thousands data). Moreover, we used clustering and classification algorithms in order to group particles according to their morphologic characteristics. This calibration phase has been tested only on standard materials with regular geometries such as cubes, spheres and cylinders. In the future we will apply this methodology to volcanic ash particles that, as well-known, are characterized by irregular morphologies.584 530
