Merucci, Luca
Preferred name
Merucci, Luca
Email
luca.merucci@ingv.it
Staff
staff
ORCID
Scopus Author ID
6508390183
69 results
Filters
Settings
The search returned 69 results
Now showing 1 - 10 of 69
- Some of the metrics are blocked by yourconsent settings
Item type:Publication, Access status: Open Access , Leveraging machine learning techniques and SEVIRI data to detect volcanic clouds composed of ash, ice, and SO2
(Göttingen: Copernicus Publications, 2026-06-30) ;Naranjo, Camilo; ; ; 10 27 - Some of the metrics are blocked by yourconsent settings
Item type:Publication, Access status: Open Access , A cross-comparison of thermal infrared versus ultraviolet ground-based retrievals of SO2 masses during Strombolian explosions
(Strasbourg: Volcanica, 2018- Strasbourg: Presses Universitaires de Strasbourg, 2025-12-15); ; ; ; This study investigates sulfur dioxide (SO2) emissions from Stromboli’s explosive activity using ground-based remote sensing techniques. We analyze the SO2 mass derived from ultraviolet (UV) and thermal infrared (TIR) cameras, alongside explosion parameters and emitted products obtained from high-frequency thermal imaging. Our dataset (May 23–24, 2023) includes 49 explosions ranging from gas-dominated (Type 0) to bomb-dominated (Type 1) and ash-rich (Type 2). During non-explosive periods, UV and TIR SO2 masses are generally comparable, whereas explosions show systematic TIR overestimation relative to UV. The TIR/UV deviation scales with plume temperature and eruption type, reflecting TIR sensitivity to thermal radiation and ash scattering, while UV retrievals remain largely temperature-independent. Our results emphasize the need for temperature-based corrections in TIR retrievals, and support integrated multi-sensor approaches for robust, real-time monitoring of volcanic gas emissions.6 28 - Some of the metrics are blocked by yourconsent settings
Item type:Publication, Access status: Open Access , Fine Tuning Eruption Source Parameters to Improve Ash Dispersion Simulations: An Example From Eyjafjallajökull 2010
(Hoboken, NJ : John Wiley & Sons, [2013]-, 2025-12-11); ; ; ; Volcanic ash dispersion simulations and remote sensing of ash clouds are conducted by volcano observatories and Volcanic Ash Advisory Centres to monitor and forecast the evolution of volcanic ash clouds in space and time in order to mitigate the risk posed by these events on civil aviation. Despite constant improvements in terms of technology and modern capabilities, both numerical simulations and monitoring are still affected by variable degrees of uncertainty. To initialize the rate of emission and position of the volcanic ash in the ash dispersion simulation computational domain of the numerical model used for forecasting the ash clouds, in particular, currently relies on the preliminary simulation of the volcanic plume. The source modeling is generally carried out using simplified plume models that depends on parameters that cannot be accurately measured in real time, for example, the wind entrainment coefficient and the plume centerline height in case of wind affected (bent-over) plumes. In this work, we test recently proposed correction factors for these parameters for two of the most widely used simplified plume models and compare with ash cloud satellite observations retrieved during the Eyjafjallajökull eruption. Specifically, we compare modeling results obtained with and without applying the corrections of the top plume height and wind entrainment coefficient. We show that, by applying the corrections, we significantly reduce the discrepancy between the simulated and satellite-retrieved ash cloud observations.9 20 - Some of the metrics are blocked by yourconsent settings
Item type:Publication, Access status: Open Access , A novel simplified ground-based thermal infrared (TIR) system for volcanic plume geometry, SO<sub>2</sub> columnar abundance, and flux retrievals
(Göttingen: Copernicus Publications, 2025-10-14); ; ; ; In the last few decades, volcanic monitoring using remote sensing systems has become an essential tool to investigate the effects of volcanic activity on environment, climate, human health, and aviation, as well as to give insights into volcanic processes. Compared to satellite measurements, ground-based instruments offer continuous spatial and temporal coverage capable of providing highresolution and high-sensitivity data. This work presents a new simplified prototype of a thermal infrared (TIR) system (named “VIRSO2”). The instrument comprises three cameras, one working in the visible spectrum and two in the TIR (8–14 μm). In front of one of the two TIR cameras, an 8.7 μm filter is placed. The system is designed for the detection of volcanic emission, geometry estimation, determining the columnar content of SO2 and ash, and SO2 flux retrievals. The retrieval procedures developed are detailed starting from the geometric characterisation with wind direction correction, the calibration by considering the effects of filter multireflections and temperature, and the SO2 mass by exploiting MODTRAN radiative transfer model (RTM) simulations. The SO2 flux is then computed by applying the traverse method, with the plume speed obtained from the wind speed at the crater altitude. As test cases, the measurements collected at Etna Volcano (Italy) on 1 April 2021 during a lava fountain episode and 30 August 2024 during a quiescent phase have been considered. The results show that the system can provide reliable information on plume detection, altitude, and SO2 flux. Its simplicity, its low cost, and the possibility of carrying out measurements at a safe distance from the vent during both the day and the night make this system ideal for realtime monitoring of volcanic emissions, thus helping to provide information on the state of activity of the volcano and therefore to mitigate the effect that these natural phenomena have on humans and the environment.7 28 - Some of the metrics are blocked by yourconsent settings
Item type:Publication, Access status: Open Access , The February–April 2021 sequence of lava fountain paroxysms on Mt Etna: source mechanism deciphered from ground-based and satellite survey of volcanic gas emissions
(Berlin; Heidelberg; New York N.Y.: Springer, 2025-10-07); ; ; ; Between 16 February and 1 April 2021, the Southeast Crater (SEC) of Mt Etna produced a spectacular sequence of 17 lava fountain paroxysms, separated by 2.5 days on average, which generated ≥ 10 km high eruptive columns and heavy tephra fallout over populated surroundings. We examine the magmatic processes responsible for these events based on pre- and syn-eruptive data for the mass flux and chemistry of Etna gas emissions, surveyed both from the ground (scanning DOAS, OP-FTIR spectroscopy) and from space (TROPOMI, SEVIRI), and comparing with the seismic tremor. Bulk plume SO2 emission rates determined from the ground and from space are consistent with one another. We show that after several months of background summit activity, sustained since June 2020 by open-system degassing of ~ 29 × 106 m3 (DRE) of magma through the central volcano conduits, an influx of deeply derived primitive magma led to a pressure build-up phase from early December 2020 to 13 February 2021, marked by a rapid increase in the SO2 flux and tremor (the former interpreted to represent an ~ 3 times higher magma degassing rate) and decreasing SO2/HCl plume ratio. A series of 17 lava fountains began immediately after a shallow seismic cluster and a sharp drop in the SO2 emission rate from the summit craters, reflecting the lateral transfer of pressurized primitive magma to beneath the SEC. The fountain paroxysms were characterized by sharp increases in tremor amplitude, intense SO2 release, and higher volcanic gas SO2/HCl ratios. The magnitude of SO2 emission rate correlates with the proportion of primitive magma in co-erupted products during the first half of the sequence. The estimated total gas discharge, compared to the co-erupted tephra mass, suggests a large excess gas release for most events, which is proportional to the length of the repose interval. Combining these observations with models of S and Cl degassing from Etna trachybasalt, we infer that the February–April 2021 lava fountain series resulted from the recurrent accumulation of H2O- CO2-rich bubble foams at ~ 2–3 km depth beneath SEC, whose periodic collapse promoted fast magma ascent and fragmentation associated with essentially syn-eruptive degassing of S and Cl. Our study thus provides further insight into the complexity of magmatic processes determining lava fountain paroxysms at Mt Etna and, possibly, other basaltic volcanoes.15 23 - Some of the metrics are blocked by yourconsent settings
Item type:Publication, Access status: Open Access , Applications of Ground-Based Infrared Cameras for Remote Sensing of Volcanic Plumes
(2024-03-17); ; ; ; Ground-based infrared cameras can be used effectively and safely to provide quantitative information about small to moderate-sized volcanic eruptions. This study describes an infrared camera that has been used to measure emissions from the Mt. Etna and Stromboli (Sicily, Italy) volcanoes. The camera provides calibrated brightness temperature images in a broadband (8–14 µm) channel that is used to determine height, plume ascent rate and volcanic cloud/plume temperature and emissivity at temporal sampling rates of up to 1 Hz. The camera can be operated in the field using a portable battery and includes a microprocessor, data storage and WiFi. The processing and analyses of the data are described with examples from the field experiments. The updraft speeds of the small eruptions at Stromboli are found to decay with a timescale of ∼10 min and the volcanic plumes reach thermal equilibrium within ∼2 min. A strong eruption of Mt. Etna on 1 April 2021 was found to reach ∼9 km, with ascent speeds of 10–20 ms−1. The plume, mostly composed of the gases CO2, water vapour and SO2, became bent over by the prevailing winds at high levels, demonstrating the need for multiple cameras to accurately infer plume heights.34 137 - Some of the metrics are blocked by yourconsent settings
Item type:Publication, Access status: Open Access , Volcanic Clouds Characterization of the 2020–2022 Sequence of Mt. Etna Lava Fountains Using MSG-SEVIRI and Products’ Cross-Comparison
(2023-04-13); ; ; ; From December 2020 to February 2022, 66 lava fountains (LF) occurred at Etna volcano (Italy). Despite their short duration (an average of about two hours), they produced a strong impact on human life, environment, and air traffic. In this work, the measurements collected from the Spinning Enhanced Visible and InfraRed Imager (SEVIRI) instrument, on board Meteosat Second Generation (MSG) geostationary satellite, are processed every 15 min to characterize the volcanic clouds produced during the activities. In particular, a quantitative estimation of volcanic cloud top height (VCTH) and ash/ice/SO2 masses’ time series are obtained. VCTHs are computed by integrating three different retrieval approaches based on coldest pixel detection, plume tracking, and HYSPLIT models, while particles and gas retrievals are realized simultaneously by exploiting the Volcanic Plume Retrieval (VPR) real-time procedure. The discrimination between ashy and icy pixels is carried out by applying the Brightness Temperature Difference (BTD) method with thresholds obtained by making specific Radiative Transfer Model simulations. Results indicate a VCTH variation during the entire period between 4 and 13 km, while the SO2, ash, and ice total masses reach maximum values of about 50, 100, and 300 Gg, respectively. The cumulative ash, ice, and SO2 emitted from all the 2020–2022 LFs in the atmosphere are about 750, 2300, and 670 Gg, respectively. All the retrievals indicate that the overall activity can be grouped into 3 main periods in which it passes from high (December 2020 to March 2021), low (March to June 2021), and medium/high (June 2021 to February 2022). The different products have been validated by using TROPOspheric Monitoring Instrument (TROPOMI) polar satellite sensor, Volcano Observatory Notices for Aviation (VONA) bulletins, and by processing the SEVIRI data considering a different and more accurate retrieval approach. The products’ cross-comparison shows a generally good agreement, except for the SO2 total mass in case of high ash/ice content in the volcanic cloud.79 193 - Some of the metrics are blocked by yourconsent settings
Item type:Publication, Access status: Open Access , Volcanic Emissions, Plume Dispersion, and Downwind Radiative Impacts Following Mount Etna Series of Eruptions of February 21–26, 2021
During the extended activity of Mount Etna volcano in February–April 2021, three distinct paroxysmal events took place from February 21 to 26, which were associated with a very uncommon transport of the injected upper-tropospheric plumes toward the north. Using a synergy of observations and modeling, we characterized the emissions and three-dimensional dispersion for these three plumes, monitored their downwind distribution and optical properties, and estimated their radiative impacts at selected locations. With a satellite-based source inversion, we estimate the emitted sulfur dioxide (SO2) mass at an integrated value of 55 kt and plumes injections at up to 12 km altitudes, which qualifies this series as an extreme event for Mount Etna. Then, we combine Lagrangian dispersion modeling, initialized with measured temporally resolved SO2 emission fluxes and altitudes, with satellite observations to track the dispersion of the three individual plumes. The transport toward the north allowed the height-resolved downwind monitoring of the plumes at selected observatories in France, Italy, and Israel, using LiDARs and photometric aerosol observations. Volcanic-specific aerosol optical depths (AODs) in the visible spectral range ranging from about 0.004 to 0.03 and local daily average shortwave radiative forcing (RF) ranging from about −0.2 to −1.2 W m −2 (at the top of atmosphere) and from about −0.2 to −3.0 W m −2 (at the surface) are found. The composition (possible presence of ash), AOD, and RF of the plume have a large inter-plume and intra-plume variability and thus depend strongly on the position of the sampled section of the plumes.146 133 - Some of the metrics are blocked by yourconsent settings
Item type:Publication, Access status: Open Access , Volcanic Cloud Detection and Retrieval Using Satellite Multisensor Observations
Satellite microwave (MW) and millimetre-wave (MMW) passive sensors can be used to detect volcanic clouds because of their sensitivity to larger volcanic particles (i.e., size bigger than 20 µm). In this work, we combine the MW-MMW observations with thermal-infrared (TIR) radiometric data from the Low Earth Orbit (LEO) spectroradiometer to have a complete characterisation of volcanic plumes. We describe new physical-statistical methods, which combine machine learning techniques, aimed at detecting and retrieving volcanic clouds of two highly explosive eruptions: the 2014 Kelud and 2015 Calbuco test cases. For the detection procedure, we compare the well-known split-window methods with a machine learning algorithm named random forest (RF). Our work highlights how the machine learning method is suitable to detect volcanic clouds using different spectral signatures without fixing a threshold. Moreover, the RF model allows images to be automatically processed with promising results (90% of the area correctly identified). For the retrieval procedure of the mass of volcanic particles, we consider two methods, one based on the maximum likelihood estimation (MLE) and one using the neural network (NN) architecture. Results show a good comparison of the mass obtained using the MLE and NN methods for all the analysed bands. Summing the MW-MMW and TIR estimates, we obtain the following masses: 1.11 ± 0.40 10 11 kg (MLE method) and 1.32 ± 0.47 10 11 kg (NN method) for Kelud; 4.48 ± 1.61 10 10 kg (MLE method) and 4.32 ± 1.56 10 10 kg (NN method) for Calbuco. This work shows how machine learning techniques can be an effective tool for volcanic cloud detection and how the synergic use of the TIR and MW-MMW observations can give more accurate estimates of the near-source volcanic clouds.168 53 - Some of the metrics are blocked by yourconsent settings
Item type:Publication, Access status: Open Access , Volcanic cloud detection using Sentinel-3 satellite data by means of neural networks: the Raikoke 2019 eruption test case
Accurate automatic volcanic cloud detection by means of satellite data is a challenging task and is of great concern for both the scientific community and aviation stakeholders due to well-known issues generated by strong eruption events in relation to aviation safety and health impacts. In this context, machine learning techniques applied to satellite data acquired from recent spaceborne sensors have shown promising results in the last few years. This work focuses on the application of a neural-network-based model to Sentinel-3 SLSTR (Sea and Land Surface Temperature Radiometer) daytime products in order to detect volcanic ash plumes generated by the 2019 Raikoke eruption. A classification of meteorological clouds and of other surfaces comprising the scene is also carried out. The neural network has been trained with MODIS (Moderate Resolution Imaging Spectroradiometer) daytime imagery collected during the 2010 Eyjafjallajökull eruption. The similar acquisition channels of SLSTR and MODIS sensors and the comparable latitudes of the eruptions permit an extension of the approach to SLSTR, thereby overcoming the lack in Sentinel-3 products collected in previous mid- to high-latitude eruptions. The results show that the neural network model is able to detect volcanic ash with good accuracy if compared to RGB visual inspection and BTD (brightness temperature difference) procedures. Moreover, the comparison between the ash cloud obtained by the neural network (NN) and a plume mask manually generated for the specific SLSTR images considered shows significant agreement, with an F-measure of around 0.7. Thus, the proposed approach allows for an automatic image classification during eruption events, and it is also considerably faster than time-consuming manual algorithms. Furthermore, the whole image classification indicates the overall reliability of the algorithm, particularly for recognition and discrimination between volcanic clouds and other objects.69 140
