Skip to main content
The search returned 108 results
Now showing 1 - 10 of 108
  • Some of the metrics are blocked by your 
    Item type:Publication, Access status: Open Access ,

    Sutures in mafic pyroclasts

    (Berlin; Heidelberg; New York N.Y.: Springer, 2026-03-29) ; ; ; ;
    Micrometer-scale Fe (iron)-rich filaments are common in mafic pyroclasts, yet their origin remains debated. These filaments have been variably interpreted as sutured fractures in magma, the product of magma mingling, compositional boundary layers detached from plagioclase crystals, or oxide shells stripped from bubbles. Here, we compare new observations from several case studies with previous results, concluding that shared features point to a common origin of filaments in all eruptions. Key shared features of filaments are as follows: (1) Fe, Mg, and Ca enrichment; (2) variable degree of contortion, sharpness, and Fe oxide microlite content; (3) inclusion of small vesicles and microlite fragments; (4) transition into cracks and broken crystals; (5) connection to sharp concavities of vesicles and pyroclast edges; and (6) separation of regions within pyroclasts with distinct textures. Focused Ion Beam, micron-sized trenches cut perpendicular to the polished section, and X-ray computed microtomography images reveal that the two-dimensional filaments are complex three-dimensional surfaces resulting from magma suturing. These sutures form by fusing of molten, Fe-enriched surfaces, whether exposed crack surfaces within pyroclasts, the surfaces of colliding pyroclasts, or the surfaces of different portions of the same pyroclast folded over itself. During fusing, sutures entrap voids and crystal fragments present on the surfaces. After fusing, sutures evolve by diffusion, crystallization, and viscous deformation. Sutures witness the complex thermal and deformation history of pyroclasts during and after magma fragmentation and act as unique telltales of otherwise invisible processes that affect pyroclast final size, chemical composition, and vesicle and crystal size distributions.
      5  11
  • Some of the metrics are blocked by your 
    Item type:Publication, Access status: Open Access ,

    In flight fragmentation reduces bomb size range and hazard during explosive volcanic eruptions

    (London: Springer Nature London: Nature Publishing Group, 2025-10-22) ; ; ; ;
    Coarse, molten fragments of low-viscosity magma (volcanic bombs) that are ejected during explosive volcanic eruptions represent a source of hazard and a record of past eruptions. After ejection, bombs tend to break up during flight, but how much this affects their dispersal is unclear. Here, we use highspeed and high-definition imaging of three recent explosive eruptions to parameterise the in-flight fragmentation of bombs. We estimate that in-flight fragmentation involves 73% of bombs coarser than ∼ 0.2 m, with bomb-to-bomb collisions and aerodynamic frictional (drag) forces being the main drivers of in-flight fragmentation, depending on eruption style. Drag force increases with increasing bomb velocity and size, selectively fragmenting the coarsest and fastest bombs, acting as a selflimiting factor for the range and energy of falling bombs. These findings pose a quantitative basis for incorporating the in-flight fragmentation processes into the interpretation of volcanic deposits and for modelling hazards from falling bombs. Volcanic bombs are coarse (> 64 mm), variably molten fragments of low-viscosity magma ejected during explosive volcanic eruptions. Volcanic bombs travel along approximately ballistic trajectories, mainly controlled by the ejection velocity and angle acquired at the vent and friction with the surrounding fluid (volcanic gas jet or surrounding atmosphere) 1-5. Ejection angle and velocity being the same, coarser bombs will travel further due to their higher mass-to-surface ratio and corresponding higher inertia-to-friction ratio. In the eruption of relatively hot and low-viscosity mafic magmas, such as basalt, bombs remain mostly fluid during their ballistic transport. This increases the potential for in-flight deformation and fragmentation to alter bomb size, trajectory, and, eventually, the associated hazards and deposit features 5-11. Despite its relevance, however, in-flight bomb break-up is poorly described qualitatively and quantitatively, with a few exceptions 5,12. The fallout of volcanic bombs represents one of the most significant hazards in the range of a few kilometres from the vent of explosively erupting volcanoes, often associated with small and unexpected eruptions 13-15. It affects both visiting tourists and scientists conducting measurements in high-risk zones, with examples from Stromboli and Etna (Italy) and Yasur (Vanuatu) volcanoes 16-19. Bombs have been documented to reach distances of 2-5 km from the vent, and up to 10 km 7,13,17,20-22 Bombs also pose a significant economic threat, damaging infrastructure and buildings 14,17,23,24. Field-and drone-based studies on the dispersal and grain-size distribution of bomb deposits are crucial to understand the dynamics of past eruptions and the definition of hazard maps 7,12,19,22,25-31. Ballistic dispersion modelling is often used for hazard forecast and to infer exit velocity during past explosive eruptions 2,4,26,32-34. Up to now, however, neither modelling or deposit interpretation schemes take into account in-flight bomb fragmentation. Here, we analysed high-speed and high-definition videos of three recent explosive eruptions to qualitatively and quantitatively characterise the in-flight fragmentation of fluidal bombs. Case studies To cover a range of volcanoes and styles in low-viscosity magma explosive activity, four case studies are the focus of this inquiry (Fig. 1). The first two case studies are the fountaining activity (Fig. 1a) and the spattering
      8  16
  • Some of the metrics are blocked by your 
    Item type:Publication, Access status: Open Access ,

    Methane seepage dynamics and ground heating phenomena in the southern Po Valley: the case study of Santa Maria Nuova (Italy)

    (Oxford: Elsevier Ltd., 2025-09-10)
    Capelli Ghioldi, G
    ;
    ; ; ;
    Natural reservoirs that release CH 4 can substantially increase atmospheric greenhouse gas levels, posing environmental and safety risks. Degassing phenomena in the Emilia-Romagna region (Italy) have been documented across a variety of fluids and reservoir types, with a focus on their origin and evolution. This study combines ground measurements and satellite data analysis to explore the relationships between CH 4 seepage, thermal anomalies, and vegetation stress at the Santa Maria Nuova (SMN) site in southern Po Valley. The explosion of a CH 4-saturated water well in July 2021 prompted a two-year investigation in the adjacent cultivated field (1.5 ha), revealing significant spatial and temporal variations in diffuse CH 4 fluxes (ranging from 0 to 917 g m − 2 d − 1) and corresponding CO 2 fluxes (1.9-466 g m − 2 d − 1). Soil temperature measurements and thermal imaging identified localised ground heating, attributed to methanotrophic exothermic oxidation of CH 4 to CO 2. These hotspots correspond to areas of visibly stressed vegetation, marked by reduced vitality and barren areas. Satellite-derived Ratio Vegetation Index (RVI) data confirmed persistent vegetation stress over the anomaly site from 2017 to 2024. Geochemical analysis of soil gases indicated a primarily biogenic origin of CH 4 , supported by isotopic signatures (δ 13 C-CH 4 values < − 60 ‰ V-PDB) and the presence of shallow Pleistocene carbonate deposits beneath the site, which can generate CH 4 seepage. These findings demonstrate the utility of integrating ground-based and remote sensing techniques for monitoring CH 4 seepage and its environmental impacts.
      12  32
  • Some of the metrics are blocked by your 
    Item type:Publication, Access status: Open Access ,

    Combining 3‐D Deep Electrical Resistivity Tomography With Magnetic Surveys to Investigate Complex Tectonic Basins: A Case Study From the Central Apennines Seismic Belt (Italy)

    (Washington, D.C. : American Geophysical Union, European Geophysical Society, 2025-08-28) ; ; ; ;
    We use an innovative geophysical approach to reconstruct the deep structure of Campo Felice, an important extensional basin in the centrai Apennines (ltaly) where active crustal extension is accommodated by nonna! fauJts capable of generating earthquakes of magnitude Mw 6+. To this end, we combine 3-D Deep Electrical Resistivity Tomography with Unmanned Aerial Vehicle aeromagnetic survey. Before this study, the knowledge of the subsurface was limited to a small sector of the basin investigated by two seismic reflection profiles and shallow scientific drillings. Our resistivity model unravels for the first time a complex subsurface structure, due to two SW-dipping and left-stepping norma! faults (Mt Cefalone­Serralunga and Mt Orsello), with antithetic and relay faults. Altogether, they favored the generation of two distinct sub-basins ~400--450 and ~250-300 m-deep, filled with alluvial, lacustrine and glacial deposits. Aeromagnetic data further constrain the extent and thickness of fine-grained infili sediments, while previous drillings and seismic reflection profiles are useful to constrain geologica! interpretation. We provide a model of basin evolution covering approximately the last million years, improving the knowledge of the Quatemary kinematics and structure of this sector of the chain. Furthermore, th.is cost-effective approach can be safely exported to similar tectonic contexts elsewhere.
      9  37
  • Some of the metrics are blocked by your 
    Item type:Publication, Access status: Restricted ,

    Very fast canyon formation and evolution along active volcanic flanks: A case from Stromboli Island

    Active insular volcanoes are generally characterized by their rapid morphological evolution, as a close interplay exists between eruptive activity and erosive-depositional processes in such volcanoes. The Sciara del Fuoco depression, a sector collapse scar on the NW flank of the Stromboli volcano (Italy), is considered a natural laboratory for studying the response of a volcanic slope to such a dynamic evolution. In this study, we report the very fast morphological evolution that affected the subaerial and submarine Sciara del Fuoco slope from May 2022 to May 2023, a period of time marked by the occurrence of two crater rim failures, pyroclastic density currents and multiple lava flows. The analysis of repeated topo-bathymetric surveys demonstrates that a narrow (100 m wide at maximum) and steep-sided canyon, tens of meters deep, formed in the central part of the Sciara del Fuoco. The canyon was mainly related to the erosive activity of the pyroclastic density currents, which led to the remobilization of (at least) 3.7 × 106 m3 volcanic material, mainly in the subaerial slope. The canyon was initially formed by retrogressive erosion upslope, starting from an initial submarine/coastal landslide. It then evolved through a progressive widening of its flanks through small-scale landslides. The study shows that landslide location, as well as the final canyon shape, were strongly controlled by the lithological limits of pre- vious lava flows, highlighting the importance of inherited morpho-stratigraphy and lateral heterogeneities in slope stability. Since its formation, the canyon has acted as a main conduit for lava flows and volcaniclastic materials supplied on their way to the sea. About 1 × 106 m3 of material filled the subaerial canyon floor through time, and another 1 × 106 m3 of slope accretion was estimated for the submarine part of the Sciara del Fuoco, down to 400 m below sea level. Comparing the volumes associated with slope erosion and accretion, it is evident that a large part of the remobilized material bypassed the Sciara del Fuoco shallow-water sector and was emplaced at greater depths. This study highlights the relevance of an integrated system for monitoring the submarine and subaerial morphological evolution of insular volcanic flanks, contributing to an improved geo- hazard assessment during eruptive crises.
      7
  • Some of the metrics are blocked by your 
    Item type:Publication, Access status: Restricted ,

    The liquefaction evidences following the 2020 Petrinja earthquake (Pannonian basin, Croatia): A full database and insights for phenomena comprehension

    (Earthquake Engineering Research Institute:499 14th Street, Suite 320:Oakland, CA 94612:(510)451-0905, EMAIL: eeri@eeri.org, INTERNET: http://www.eeri.org, Fax: (510)451-5411, 2025-03-25) ; ;
    Valvano, Christian
    ;
    Wacha, Lara
    ;
    The 2020 MW 6.4 Petrinja (Croatia) earthquake induced extensive and diversified liquefaction and lateral spreading phenomena within ’ 20 km radius from the epicenter. A detailed investigation from field and Unmanned Aerial Vehicle (UAV) surveys was carried out by a European researcher team (EUTeam) in the months following the mainshock. This work focuses on 61 surveyed sites: field observations were coupled with laboratory tests for soil classification and sediment composition. The adopted procedure provides an in-depth geological and geotechnical characterization of the liquefied sites in the Petrinja region. The liquefaction evidences are mainly associated to alluvial plain environments, in particular to meander paleochannels, and the ejected material is predominantly siliciclastic, made up of very rounded quartz-rich lithics. Few sites are dominated by angular carbonate rock fragments, related to liquefaction in cataclastic deposits along tectonic fractures. The ejected sediment includes a wide range of grain-size from silt to gravel. The peculiar presence of gravel in the liquefied deposits (up to 28% in some samples) confirms the need of expanding the grain-size boundaries for liquefiable coarse-grained gravelly soils. The information gathered from the postearthquake surveys and from the sedimentological and geotechnical analysis for each studied site were compiled in organized data sheets, providing a striking instrument for in-depth earthquake studies, both for geological and geotechnical engineering purposes. The format defined for the data sheet can be functional and applicable also in liquefaction studies from different geological and depositional settings.
      7
  • Some of the metrics are blocked by your 
    Item type:Publication, Access status: Open Access ,

    Gas equilibrium in the H 2 O-H 2 -CO 2 -CO-CH 4 system for wet-steam geothermal-well fluids and their sources: A case study from Krafla, Iceland

    (Elsevier Science Limited:Oxford Fulfillment Center, PO Box 800, Kidlington Oxford OX5 1DX United Kingdom:011 44 1865 843000, 011 44 1865 843699, EMAIL: asianfo@elsevier.com, tcb@elsevier.co.UK, INTERNET: http://www.elsevier.com, http://www.elsevier.com/locate/shpsa/, Fax: 011 44 1865 843010, 2025-03-19) ; ; ; ;
    Sigurðardóttir, Ásgerður
    Equilibrium in the H 2 O-H 2-CO 2-CO-CH 4 gas system has been extensively applied to fumarole data for geothermal exploration and volcano monitoring. However, little is known about its application to two-phase (vapor and liquid) geothermal well fluids, which can show an excess of enthalpy. Here, we applied the H 2 O-H 2-CO 2-CO-CH 4 gas indicators to two-phase geothermal well discharges from the Krafla geothermal system, Iceland, to estimate aquifer temperatures and identify secondary processes during resource exploitation. Results suggest that the Krafla resource is drawn from a deep (approximately between-500 and-1,600 m a.s.l.), two-phase aquifer with temperatures ranging from 272 to 320 • C and vapor fractions between 0.26 and 0.93, explaining the excess enthalpy observed in well fluids. These estimates align with the temperatures of the main production zones of geothermal wells, whereas solute geothermometers (SiO 2 and Na/K) appear to record lower temperatures of minor, shallower, liquid aquifers. Wells with liquid-like enthalpy are sourced from the two-phase aquifer but are also influenced by water reinjection or downflows from a colder, shallower aquifer, consistent with the isothermal zone extending approximately between 400 and-900 m a.s.l. in Leirbotnar and Vesturhlíðar subfields. Water isotopes indicate the main aquifer is recharged by meteoric and reinjection fluids. Excess-enthalpy discharges show an influx of Ar-and N 2-rich vapor, with depleted 40 Ar/ 36 Ar and δ 15 N values, suggesting fractionations of atmospheric gases dissolved into the reservoir liquid. On the other hand, δ 13 C CO2 and 3 He/ 4 He values point to a mantle origin, despite the lower δ 13 C CO2 and P CO2 levels that reflect a degassed magma (i.e., a noneruptive phase). These findings underscore the usefulness of the H 2 O-H 2-CO 2-CO-CH 4 gas system and isotopic methods in tracking geothermal reservoir temperatures, their sources, and secondary processes, such as water reinjection or downflows from shallower aquifers.
      6  63
  • Some of the metrics are blocked by your 
    Item type:Publication, Access status: Open Access ,
      7  53
  • Some of the metrics are blocked by your 
    Item type:Publication, Access status: Open Access ,

    Volatile organic compounds (VOCs) from diffuse degassing areas: Interstitial soil gases as message bearers from deep hydrothermal reservoirs

    The chemical composition of volatile organic compounds (VOCs) in interstitial soil gases from hydrothermal areas is commonly shaped by both deep hydrothermal conditions (e.g., temperature, redox, sulfur fugacity) and shallow secondary processes occurring near the soil-atmosphere interface. Caldara di Manziana and Solfatara di Nepi, i.e., two hydrothermal systems characterized by diverse physicochemical conditions located in the Sabatini Volcanic District and Vicano-Cimino Volcanic District, respectively (Central Italy), were investigated to evaluate the capability of VOCs in soil gases to preserve information from the respective feeding deep fluid reservoirs. Hierarchical cluster analyses and robust principal component analyses allowed recognition of distinct groups of chemical parameters of soil gases collected from the two study areas. The compositional dissimilarities from the free-gas discharges were indeed reflected by the chemical features of soil gases collected from each site, despite the occurrence of shallow processes, e.g., air mixing and microbial degradation processes, affecting VOCs. Four distinct groups of VOCs were recognized suggesting similar sources and/or geochemical behaviors, as follows: (i) S-bearing compounds, whose abundance (in particular that of thiophenes) was strictly dependent on the sulfur fugacity in the feeding system; (ii) C4,5,7+ alkanes, n-hexane, cyclics and alkylated aromatics, related to relatively low-temperature conditions at the gas source; (iii) C2,3 alkanes, benzene, benzaldehyde and phenol, i.e., stable compounds and thermal degradation products; and (iv) aliphatic O-bearing compounds, largely influenced by shallow processes within the soil. However, they maintain a chemical speciation that preserves a signature derived from the supplying deep-fluids, with aldehydes and ketones becoming more enriched after intense interaction of the hypogenic fluids with shallow aquifers. Accordingly, the empirical results of this study suggest that the chemical composition of VOCs in soil gases from hydrothermal areas provides insights into both deep source conditions and fluid circulation dynamics, identifying VOCs as promising geochemical tracers for geothermal exploration.
      82  70
  • Some of the metrics are blocked by your 
    Item type:Publication, Access status: Open Access ,

    High-resolution geophysical investigations in the central Apennines seismic belt (Italy): Results from the Campo Felice tectonic basin

    The Campo Felice basin, in the central Apennines seismic belt (Italy), developed in the hangingwall of a 30 km-long system of NW-trending normal faults with Holocene paleoseismic activity and potential sources of M 6–7 earthquakes. We provide the first subsurface images of a key portion of the basin bounded by the Mt. Cefalone fault along two intersecting profiles trending NNE-SSW (CF-Dip, 1195 m-long) and WNW-ESE (CF-Strike, 1315-m long). We combined high-resolution depth-migrated reflection sections with P-wave velocity and electrical resistivity tomography models. CF-Dip profile displays a wedge-like syn-tectonic sedimentary sequence of alluvial and glacial deposits with Vp ∼ 2500–3000 m/s and resistivity > 500 Ωm in the hangingwall of Mt. Cefalone fault, overlying a high-Vp (>4000 m/s) limestone bedrock ∼ 300 m deep. The whole sequence displays reflectors truncated by the Mt. Cefalone fault zone and subsidiary antithetic faults. CF-Strike profile, tied to three 80–110 m-deep boreholes, shows a thick fluvio-lacustrine sequence with low-Vp (<2000 m/s) and low resistivity (<100 Ωm), and a bedrock that deepens to the southeast (>450 m). Single-station ambient noise measurements display Horizontal to Vertical Spectral Ratios with peaks at ∼1 Hz, decreasing to ∼0.8 Hz to the southeast in agreement with the bedrock deepening indicated by seismic profiling. According to our results, the Campo Felice basin is a deep asymmetric half-graben controlled by faulting whose activity likely started before the Middle Pleistocene. Our minimum displacement estimate accrued in the past 0.5 Ma by the Mt. Cefalone fault is in the range of ∼100–250 m.
      342  59