Mattone, Maurizio
Preferred name
Mattone, Maurizio
Alternative Name
Mattone, M.
Main Affiliation
The search returned 12 results
Now showing 1 - 10 of 12
- Some of the metrics are blocked by yourconsent settings
Item type:Publication, Access status: Open Access , Heterogeneous Behavior of the Campotosto Normal Fault (Central Italy) Imaged by InSAR GPS and Strong-Motion Data: Insights from the 18 January 2017 Events
On 18 January 2017, the 2016–2017 central Italy seismic sequence reached the Campotosto area with four events with magnitude larger than 5 in three hours (major event MW 5.5). To study the slip behavior on the causative fault/faults we followed two different methodologies: (1) we use Interferometric Synthetic Aperture Radar (InSAR) interferograms (Sentinel-1 satellites) and Global Positioning System (GPS) coseismic displacements to constrain the fault geometry and the cumulative slip distribution; (2) we invert near-source strong-motion, high-sampling-rate GPS waveforms, and high-rate GPS-derived static offsets to retrieve the rupture history of the two largest events. The geodetic inversion shows that the earthquake sequence occurred along the southern segment of the SW-dipping Mts. Laga normal fault system with an average slip of about 40 cm and an estimated cumulative geodetic moment of 9.29 × 1017 Nm (equivalent to a MW~6). This latter estimate is larger than the cumulative seismic moment of all the events, with MW > 4 which occurred in the corresponding time interval, suggesting that a fraction (~35%) of the overall deformation imaged by InSAR and GPS may have been released aseismically. Geodetic and seismological data agree with the geological information pointing out the Campotosto fault segment as the causative structure of the main shocks. The position of the hypocenters supports the evidence of an up-dip and northwestward rupture directivity during the major shocks of the sequence for both static and kinematic inferred slip models. The activated two main slip patches are characterized by rise time and peak slip velocity in the ranges 0.7–1.1 s and 2.3–3.2 km/s, respectively, and by ~35–50 cm of slip mainly concentrated in the shallower northern part of causative fault. Our results show that shallow slip (depth < 5 km) is required by the geodetic and seismological observations and that the inferred slip distribution is complementary with respect to the previous April 2009 seismic sequence affecting the southern half of the Campotosto fault. The recent moderate strain-release episodes (multiple M~5–5.5 earthquakes) and the paleoseismological evidence of surface-rupturing events (M~6.5) suggests therefore a heterogeneous behavior of the Campotosto fault.661 95 - Some of the metrics are blocked by yourconsent settings
Item type:Publication, Access status: Open Access , Transient crustal deformation from karst aquifers hydrology in the Apennines (Italy)
The increasing accuracy and spatiotemporal resolution of space geodetic techniques have positively impacted the study of shallow crustal deformation in response to the redistribution of water masses. Measurable deformations have been documented in areas where snow and water variability is large and persists over sufficiently long periods. Here we analyze GPS time series and hydrological data from the Central-Southern Apennines, a tectonically-active region hosting large karst aquifers. We document the occurrence of regional-scale horizontal and vertical transient deformation that is clearly correlated to seasonal and multiyear hydrological variability. These transient signals, which are most strongly observed at GPS sites surrounding the main karst aquifers, modulate long term tectonic deformation. Our results suggest that the karst aquifers in this region experience alternating periods of expansion and contraction in response to increasing/decreasing precipitation and, consequently, higher/lower hydraulic head in the aquifers. Thanks to the availability of a dense continuous GPS network and complementary hydrological datasets, we are able to verify the processes causing the observed deformation. We model the shallow crust in the region as a continuous anelastic solid and use Green's functions for finite strain cuboid sources to estimate the strain rate distribution associated with the GPS observations. We use the Mw 6.1 L'Aquila earthquake, which struck the Central Apennines in 2009 and whose effects are evident in geodetic data, to document the potential effects of moderate earthquakes on karst aquifers and to demonstrate the importance of correctly discerning tectonic from nontectonic signals in geodetic time series. Enhanced understanding of the karst aquifers behavior is of primary interest for improved management of this vital water resource and for a better understanding of the possible interactions between groundwater content and pore pressure variations in the crust and seismicity.190 256 - Some of the metrics are blocked by yourconsent settings
Item type:Publication, Access status: Open Access , Geodetic model of the 2016 Central Italy earthquake sequence inferred from InSAR and GPS data
We investigate a large geodetic data set of interferometric synthetic aperture radar (InSAR) and GPS measurements to determine the source parameters for the three main shocks of the 2016 Central Italy earthquake sequence on 24 August and 26 and 30 October (Mw 6.1, 5.9, and 6.5,respectively). Our preferred model is consistent with the activation of four main coseismic asperities belonging to the SW dipping normal fault system associated with the Mount Gorzano-Mount Vettore-Mount Bove alignment. Additional slip, equivalent to aMw~ 6.1–6.2 earthquake, on a secondary (1) NE dipping antithetic fault and/or (2) on a WNW dipping low-angle fault in the hanging wall of the main system is required to better reproduce the complex deformation pattern associated with the greatest seismic event (the Mw 6.5 earthquake). The recognition of ancillary faults involved in the sequence suggests a complex interaction in the activated crustal volume between the main normal faults and the secondary structures and a partitioning of strain release.2452 472 - Some of the metrics are blocked by yourconsent settings
Item type:Publication, Access status: Restricted , New insights into fault activation and stress transfer between en echelon thrusts: The 2012 Emilia, Northern Italy, earthquake sequence
Here we present the results of the inversion of a new geodetic data set covering the 2012 Emilia seismic sequence and the following 1 year of postseismic deformation. Modeling of the geodetic data together with the use of a catalog of 3-D relocated aftershocks allows us to constrain the rupture geometries and the coseismic and postseismic slip distributions for the two main events (Mw 6.1 and 6.0) of the sequence and to explore how these thrust events have interacted with each other. Dislocation modeling reveals that the first event ruptured a slip patch located in the center of the Middle Ferrara thrust with up to 1 m of reverse slip. The modeling of the second event, located about 15 km to the southwest, indicates a main patch with up to 60 cm of slip initiated in the deeper and flatter portion of the Mirandola thrust and progressively propagated postseismically toward the top section of the rupture plane, where most of the aftershocks and afterslip occurred. Our results also indicate that between the two main events, a third thrust segment was activated releasing a pulse of aseismic slip equivalent to a Mw 5.8 event. Coulomb stress changes suggest that the aseismic event was likely triggered by the preceding main shock and that the aseismic slip event probably brought the second fault closer to failure. Our findings show significant correlations between static stress changes and seismicity and suggest that stress interaction between earthquakes plays a significant role among continental en echelon thrusts.346 5 - Some of the metrics are blocked by yourconsent settings
Item type:Publication, Access status: Open Access , Coseismic displacement waveforms for the 2016 August 24 Mw 6.0 Amatrice earthquake (central Italy) carried out from high-rate GPS data
We used High-Rate sampling Global Positioning System (HRGPS) data from 52 permanent stations to retrieve the coseismic dynamic displacements related to the 2016 August 24 Mw 6.0 Amatrice earthquake. The HRGPS position time series (named hereinafter "GPSgrams") were obtained with two different analysis strategies of the raw GPS measurements (Precise Point Positioning [PPP] and Double-Difference [DD] positioning approaches using the Gipsy-Oasis II and the TRACK (GAMIT/GLOBK) software, respectively). These GPSgrams show RMS accuracies mostly within 0.3 cm and, for each site, an agreement within 0.5 cm between the two solutions. By using cross-correlation technique, the GPSgrams are also compared to the doubly-integrated strong motion data at sites where the different instrumentations are co-located in order to recognize in the GPSgrams the seismic waves movements. The high values (mostly greater than 0.6) of the cross-correlation functions between these differently-generated waveforms (GPSgrams and the SM displacement time-histories) at the co-located sites confirm the ability of GPS in providing reliable waveforms for seismological applications.2339 233 - Some of the metrics are blocked by yourconsent settings
Item type:Publication, Access status: Open Access , GPS observations of coseismic deformation following the 2016, august 24, Mw 6 Amatrice earthquake (Central italy): Data, analysis and preliminary fault model
We used continuous Global Positioning System (GPS) measurements to infer the fault geometry and the amount of coseismic slip associated to the August 24, 2016 Mw 6 Amatrice earthquake. We realized a three-dimensional coseismic displacement field by combining different geodetic solutions generated by three independent analyses of the raw GPS observations. The coseismic deformation field described in this work aims at representing a “consensus” solution that minimizes the systematic biases potentially present in the individual geodetic solutions. Because of the limited number of stations available we modeled the measured coseismic displacements using a uniform slip model, deriving the geometry and kinematics of the causative fault, finding good agreement between our geodetically derived fault plane and other seismological and geological observations.2815 321 - Some of the metrics are blocked by yourconsent settings
Item type:Publication, Access status: Restricted , Coseismic and post-seismic slip of the 2009 L'Aquila (central Italy) MW 6.3 earthquake and implications for seismic potential along the Campotosto fault from joint inversion of high-precision levelling, InSAR and GPS data
(2014-03-15); ; ; ; After the April 6th 2009 MW 6.3 (ML 5.9) L'Aquila earthquake (central Italy), we re-measured more than 100 km of high-precision levelling lines in the epicentral area. The joint inversion of the levelling measurements with InSAR and GPS measurements, allowed us to derive new coseismic and post-seismic slip distributions and to de- scribe, with high resolution details on surface displacements, the activation and the slip distribution of a second- ary fault during the aftershock sequence that struck the Campotosto area (major event MW 5.2). Coseismic slip on the Paganica fault occurred on one main asperity, while the afterslip distribution shows a more complex pattern, occurring on three main patches, including both slips on the shallow portions and on the deeper parts of the rup- ture plane. The comparison between coseismic and post-seismic slip distributions strongly suggests that afterslip was triggered at the edges of the coseismic asperity. The activation of a segment of the Campotosto fault during the aftershock sequence, with a good correlation between the estimated slipping area, moment release and distribution of aftershocks, raises the opportunity to discuss the local seismic hazard following the occurrence of the 2009 L'Aquila mainshock. The Campotosto fault appears capable of generating earthquakes as large as his- torical events in the region (M N 6.5) or as small as the ones associated with the 2009 sequence. In the case that the Campotosto fault is accumulating a significant portion of the current interseismic deformation, the 2009 MW N 5 events will have released only a small amount of the accumulated elastic strain, and then a significant hazard still remains in the area. Continuing geodetic monitoring and a densification of the GPS networks in the region are therefore needed to estimate the tectonic loading across the different recognized active fault systems in this part of the Apennines.577 118 - Some of the metrics are blocked by yourconsent settings
Item type:Publication, Access status: Open Access , Very high rate (10 Hz) GPS seismology for moderate-magnitude earthquakes: The case of theMw6.3 L'Aquila (central Italy) event
(2011); ; ; ; The 2009 April 6th Mw 6.3 L'Aquila destructive earthquake was successfully recorded by closely 23 spaced 10-Hz and 1-Hz recording GPS receivers and strong motion accelerometers located above or 24 close to the 50° dipping activated fault. We retrieved both static and dynamic displacements from 25 Very High-Rate GPS (VHRGPS) recordings by using Precise Point Positioning kinematic analysis. 26 We compared the GPS positions time series with the closest displacement time series obtained by 27 doubly-integrating strong motion data, first, to assess the GPS capability to detect the first seismic 28 arrivals (P waves) and, secondly, to evaluate the accelerometers capability to detect co-seismic 29 offsets up to ~45 s after the earthquake occurrence. By comparing seismic and VHRGPS frequency 30 contents, we inferred that GPS sampling rates greater than 2.5 Hz (i.e. 5 or 10 Hz) are required in 31 the near-field of moderate magnitude events to provide “alias-free” solutions of coseismic dynamic 32 displacements. Finally, we assessed the consistency of the dynamic VHRGPS results as a constraint 33 on the kinematic rupture history of the mainshock. These results suggested that the high-rate 34 sampling GPS sites in the near field can be as useful as strong motion station for earthquake source 35 studies.378 591 - Some of the metrics are blocked by yourconsent settings
Item type:Publication, Access status: Restricted , Coseismic and initial postseismic slip of the 2009 Mw 6.3 l’Aquila earthquake, Italy, from GPS measurements
(2010-06); ; ; ; Here we report the preliminary results of GPS data inversions for coseismic and initial afterslip distributions of the Mw 6.3 2009 April 6 L’Aquila earthquake. Coseismic displacements of continuous and survey-style GPS sites, show that the earthquake ruptured a planar SW-dipping normal fault with ∼0.6 m average slip and an estimated moment of 3.9 × 1018 Nm. Geodetic data agree with the seismological and geological information pointing out the Paganica fault, as the causative structure of the main shock. The position of the hypocentre relative to the coseismic slip distribution supports the seismological evidence of southeastward rupture directivity. These results also point out that the main coseismic asperity probably ended downdip of the Paganica village at a depth of few kilometres in agreement with the small (1–10 cm) observed surface breaks. Time-dependent post-seismic displacements have been modelled with an exponential function. The average value of the estimated characteristic times for near-field sites in the hanging-wall of the fault is 23.9 ± 5.4 d. The comparison between coseismic slip and post-seismic displacements for the first 60 d after the main shock, shows that afterslip occurred at the edges of the main coseismic asperity with a maximum estimated slip of ∼25 cm and an equivalent seismic moment of 6.5 × 1017 Nm. The activation of the Paganica fault, spatially intermediate between the previously recognized main active fault systems, suggests that strain accumulation in the central Apennines may be simultaneously active on distinct parallel fault systems.430 59 - Some of the metrics are blocked by yourconsent settings
Item type:Publication, Access status: Open Access , Active crustal extension and strain accumulation from GPS data in the Molise region (central-southern Apennines, Italy)
In this paper, we report new GPS measurements which indicate active NE-SW extension and strain accumulation in the Molise region (Apennines, Italy). The GPS observations were collected during campaigns on benchmarks of the dense IGM95 network (average distance 20 km), spanning a maximum observation interval of 13 years, and have been integrated with measurements from the available permanent GPS sites. Considering the differential motion of the GPS sites, located on the Tyrrhenian and Adriatic coasts, we can evaluate a 4-5 mm/yr extension accommodated across this part of the Apennines. The velocity field exhibits clusters of sites with homogeneous velocity vectors, outlining two main divergence areas, both characterized by the largest velocity gradients: one near Venafro and the other near Isernia where two primary active faults and several historical earthquakes have been documented. These results suggest that an active extension in this part of the Apennines can be currently distributed between the two faults systems associated with the largest earthquakes of this region.387 441
