Skip to main content
The search returned 78 results
Now showing 1 - 10 of 78
  • Some of the metrics are blocked by your 
    Item type:Publication, Access status: Open Access ,

    New Advances Towards Early Warning Systems in the Mediterranean Sea Using the Real-Time RING GNSS Research Infrastructure

    (Basel : Molecular Diversity Preservation International, 2025-11-07) ; ; ; ;
    Du, Shi
    Nowadays, information obtained through Global Navigation Satellite Systems (GNSSs) is widely employed in modern geodesy. The Precise Point Positioning (PPP) approach, which leverages signals from multiple GNSS constellations (e.g., GPS, GLONASS, Galileo, and BeiDou), enables high-precision positioning—crucial for seismic monitoring and early tsunami warning systems (EEWs). Recent advances, such as increased satellite availability and additional frequency bands, have significantly improved PPP performance, particularly in terms of positioning accuracy and convergence time. This study focuses on the Rete Integrata Nazionale GNSS (RING) network, managed by the Istituto Nazionale di Geofisica e Vulcanologia (INGV), which comprises dual-frequency GNSS receivers distributed across the Italian peninsula and parts of the Mediterranean Basin. We evaluate the performance show that the PPP-RA approach enhances positioning accuracy and reduces convergence time, especially when comparing GPS-only datasets with those incorporating full multi- GNSS configurations. For the daily solution, in the optimal setup (i.e., full GNSS with RA), real-time solutions exhibit average accuracies of 2.05, 1.73, and 4.35 cm for the North, East, and vertical components, respectively. Sub-daily accuracies’ analysis, using 300 s sliding windows, showed even better uncertainties, exhibiting median values of 0.41, 0.32, and 0.9 cm for the North, East and vertical components, respectively. Based on the outcomes for network-wide sub-daily accuracies, 84% of the stations demonstrate average errors within 2 cm for North and East components and 3 cm for the vertical one. The analysis on the convergence time after data gaps occurred during the investigation period shows that 87% of the RING stations experienced convergence times lower than five minutes in the GNSS PPP-RA solution. These findings underscore the potential of RT-GNSS RING data for enhancing seismic monitoring and early warning systems, particularly in tectonically active regions. of the RING data (GPS and GNSS) acquired in a period of three weeks between 19 January 2024 and 9 February 2024 and analyzed in real time by using different PPP strategies: standard PPP and PPP with Regional Augmentation (PPP-RA). The preliminary results
      6  14
  • Some of the metrics are blocked by your 
    Item type:Publication, Access status: Open Access ,

    Real-time GPS vs full-GNSS time series accuracies estimations at RING INGV research infrastructure

    (Copernicus GmbH, 2025-01-20) ; ; ;
    Shi, Du
    ;
    The RING (Rete Integrata Nazionale GNSS) is a research infrastructure developed for accurately measuring deformations at different spatial and temporal scales in the Eurasia-Africa plate boundary region (Avallone et al., 2010). Currently, the RING network (http://ring.gm.ingv.it/) is composed of 280 real-time transmitting remote sites, 70% of which are now equipped with full-GNSS (GPS, Galileo, Glonass and Beidou) instrumentation. The data streaming, in standard RTCM v.3 format, from these sites to the acquisition centre in southern Italy (Sezione Irpinia, Grottaminarda, AV) is managed by a tuned Ntrip Caster (https://igs.bkg.bund.de/ntrip/bkgcaster). The typical magnitude of the strongest events that occurred in the last century in this region (5.5-7) should require high accuracy (2-3 cm) GPS/GNSS time series to properly observe both static and dynamic coseismic displacements and, then, to properly model the earthquake source. Furthermore, the detection of any afterslip or, in general, any transient deformation should require even better accuracy (< 2 cm). The real-time GPS/GNSS data analysis has been implemented by means of the RTPPP software developed by GFZ (Ge et al., 2012). This software allows the determination of various Precise Point Positioning products with increasing accuracy (standard PPP, PPP with ambiguity resolution [PPP-AR], and PPP with regional augmentation [PPP-RA]). We performed some preliminary investigations on different (limited in time) datasets and we compared GPS-only and full-GNSS results. In the case of GPS-only PPP-RA solutions, the accuracies estimated on 24-hour data for the whole network amount up to 1.7 cm and 6 cm for the horizontal and vertical components, respectively. In the case of full-GNSS solutions, the same approach (PPP-RA) allowed an improvement of about 22% on both horizontal and vertical components (1.3 cm and 4.6 cm). Furthermore, we compared both GPS-only and full-GNSS solutions with another method, i.e. by using a short-term accuracy analysis. Using 60-s or 120-s sliding windows, that should better simulate the time span for detecting coseismic displacements, we can achieve 0.5 cm and 1 cm for horizontal and vertical components, respectively, for GPS-only solutions, and 0.3 cm and 0.5 cm for full-GNSS ones. Finally, for a few examples of earthquakes that recently occurred in Italy, we will show comparisons between post processed high-rate solutions carried out by Gipsy-Oasis II solutions and those obtained by RTPPP simulating real-time time series. The obtained accuracies will demonstrate the reliability of the RING infrastructure real-time GNSS solutions for early warning and rapid response applications.
      6  13
  • Some of the metrics are blocked by your 
    Item type:Publication, Access status: Open Access ,

    Geomorphology of the upper sector of the Roncovetro active landslide (Emilia-Romagna Region, Italy)

    We present the geomorphological map of the upper sector of the Roncovetro active landslide (Enza Valley, Emilia-Romagna, Italy). The 1:1500 scale map provides an accurate picture of the landslide in October 2014. The map is mainly based on the data collected during an airborne LiDAR survey. The capability of LiDAR to ‘penetrate’ the vegetation cover makes these data the most complete and accurate topographic dataset of this landslide. The map shows that the upper sector of the Roncovetro landslide consists of gravity- and water runoff-related forms. Gravitational features are linked to sliding and flowing movements that characterize the short- and long-term behaviour of the landslide. By comparing the 2014 LiDAR-Digital Elevation Model (DEM) with the 1973 DEM provided by the Emilia-Romagna Region, we calculated that 6.2 ± 0.8 × 105 m3 of material has moved from the top of the Roncovetro landslide in about 40 years.
      310  112
  • Some of the metrics are blocked by your 
    Item type:Publication, Access status: Open Access ,

    GNSS-Interferometric Reflectometry, spectral artifacts and sea level measurements in the Mediterranean Sea

    Tidal sea level variations in the Mediterranean basin, although altered and amplified by resonance phenomena in confined sub-basins (e.g., Adriatic Sea), are generally confined within 0.5 meters and exceptionally up to 1.5 meters. Here we explore the possibility to retrieve sea level measurements using data from GNSS antennas on duty for ground motion monitoring and analyze the spectral outcomes of such distinctive measurements. We estimate one year of GNSS data collected on the Mediterranean coasts in order to get reliable sea level data from all public-available data and compare it with collocated tide gauges. A total amount of eleven stations was suitable for interferometric analysis (as for 2021) and all were able to supply centimeter level sea level estimates. The spectra in the tidal frequency windows are remarkably similar to tide gauges data. We find that the O1 and M2 diurnal and semidiurnal tides and MK3, MS4 shallow sea water tides may be disturbed by aliasing effects.
      57  142
  • Some of the metrics are blocked by your 
    Item type:Publication, Access status: Open Access ,

    Seismic source identification of the 9 November 2022 Mw 5.5 offshore Adriatic sea (Italy) earthquake from GNSS data and aftershock relocation

    The fast individuation and modeling of faults responsible for large earthquakes are fundamental for understanding the evolution of potentially destructive seismic sequences. This is even more challenging in case of buried thrusts located in offshore areas, like those hosting the 9 November 2022 Ml 5.7 (Mw 5.5) and ML 5.2 earthquakes that nucleated along the Apennines compressional front, offshore the northern Adriatic Sea. Available on- and offshore (from hydrocarbon platforms) geodetic observations and seismological data provide robust constraints on the rupture of a 15 km long, ca. 24° SSW-dipping fault patch, consistent with seismic reflection data. Stress increase along unruptured portion of the activated thrust front suggests the potential activation of longer portions of the thrust with higher magnitude earthquake and larger surface faulting. This unpleasant scenario needs to be further investigated, also considering their tsunamigenic potential and possible impact on onshore and offshore human communities and infrastructures.
      64  47
  • Some of the metrics are blocked by your 
    Item type:Publication, Access status: Open Access ,

    Status of the GINGER project

    Large frame ring laser gyroscopes, based on the Sagnac effect, are top sensitivity instrumentation to measure angular velocity with respect to the fixed stars. GINGER (Gyroscopes IN GEneral Relativity) project foresees the construction of an array of three large dimension ring laser gyroscopes, rigidly connected to the Earth. GINGER has the potentiality to measure general relativity effects and Lorentz Violation in the gravity sector, once a sensitivity of 10 9, or better, of the Earth rotation rate is obtained. Being attached to the Earth crust, the array will also provide useful data for geophysical investigation. For this purpose, it is at present under construction as part of the multi-components observatory called Underground Geophysics at Gran Sasso (UGSS). Sensitivity is the key point to determine the relevance of this instrument for fundamental science. The most recent progress in the sensitivity measurement, obtained on a ring laser prototype called GINGERINO, indicates that GINGER should reach the level of 1 part in 1011 of the Earth rotation rate.
      45  108
  • Some of the metrics are blocked by your 
    Item type:Publication, Access status: Open Access ,

    Ginger

    In this paper, we outline the scientific objectives, the experimental layout, and the collaborations envisaged for the GINGER (Gyroscopes IN GEneral Relativity) project. The GINGER project brings together different scientific disciplines aiming at building an array of Ring Laser Gyroscopes (RLGs), exploiting the Sagnac effect, to measure continuously, with sensitivity better than picorad/s, large bandwidth (ca. 1 kHz), and high dynamic range, the absolute angular rotation rate of the Earth. In the paper, we address the feasibility of the apparatus with respect to the ambitious specifications above, as well as prove how such an apparatus, which will be able to detect strong Earthquakes, very weak geodetic signals, as well as general relativity effects like Lense-Thirring and de Sitter, will help scientific advancements in Theoretical Physics, Geophysics, and Geodesy, among other scientific fields.
      204  248
  • Some of the metrics are blocked by your 
    Item type:Publication, Access status: Open Access ,

    GNSS – Interferometric Reflectometry, sea level measurements and spectral artifacts

    Commonly sea level variations are monitored by tide gages that measure the relative sea level (RSL) with respect to a local reference on land. RSL measurements are a combination of the global sea level variation and the local vertical land motion. Larson et al.,2012 developed the interferometric reflectometry technique (GNSS-IR) and demonstrate that sea surface height can be monitored at the level of a few centimeters using a single GNSS antenna facing the seashore. In that case, the local reference point matches with the antenna mount that can be monitored directly in a global reference frame. Thus the GNSS-IR technique allow to monitor the global Sea-level directly from a single measurement. We discuss the results obtained for a few Sea-level time series obtained from existing GNSS permanent stations in the Mediterranean area. We analyse the spectral content of tidal components and examine the origin of spurious signals observed in the periodograms, due to satellite-driven aliasing effects.
      85  170
  • Some of the metrics are blocked by your 
    Item type:Publication, Access status: Open Access ,

    Surface Velocities and Strain-Rates in the Euro-Mediterranean Region From Massive GPS Data Processing

    In this work we present and discuss new geodetic velocity and strain-rate fields for the Euro-Mediterranean region obtained from the analysis of continuous GNSS stations. We describe the procedures and methods adopted to analyze raw GPS observations from >4000 stations operating in the Euro-Mediterranean, Eurasian and African regions. The goal of this massive analysis is the monitoring of Earth’s crust deformation in response to tectonic processes, including plate- and micro-plate kinematics, geodynamics, active tectonics, earthquake-cycle, but also the study of a wide range of geophysical processes, natural and anthropogenic subsidence, sea-level changes, and hydrology. We describe the computational infrastructure, the methods and procedures adopted to obtain a threedimensional GPS velocity field, which is used to obtain spatial velocity gradients and horizontal strain-rates. We then focus on the Euro-Mediterranean region, where we discuss the horizontal and vertical velocities, and spatial velocity gradients, obtained from stations that have time-series lengths longer than 6 and 7 years, which are found to be the minimum spans to provide stable and reliable velocity estimates in the horizontal and vertical components, respectively. We compute the horizontal strain-rate field and discuss deformation patterns and kinematics along the major seismogenic belts of the Nubia-Eurasia plate boundary zone in the Mediterranean region. The distribution and density of continuous GNSS stations in our geodetic solution allow us to estimate the strain-rate field at a spatial scale of ~27 km over a large part of southern Europe, with the exclusion of the Dinaric mountains and Balkans.
      495  471
  • Some of the metrics are blocked by your 
    Item type:Publication, Access status: Open Access ,

    The INGV Mediterranean GNSS Archive (MGA)

    The Global Navigation Satellite System (GNSS) represents a primary data source in Solid Earth Sciences. In order to investigate the Earth’s crustal deformation, time series of the estimated daily positions of the stations are routinely analyzed at the Istituto Nazionale di Geofisica e Vulcanologia (INGV) to investigate the deformation of the Earth’s surface caused by tectonic and non-tectonic processes. The GNSS observations of the stations are processed using the three main scientific software: GAMIT/GLOBK, BERNESE, and GIPSY OASIS II. The accuracy and the strength of geodetic solutions often depend on the geometry and spatial density of the network, and the availability and quality of GNSS data. In many circumstances, GNSS networks are deployed for topographic purposes by private or public institutions, and a significant number of GNSS stations in large regions acquire continuous observations. It may happen that such networks do not collect and distribute data according to IGS standards, so it could be difficult to analyze this data using automated data-processing tools. For that reason, this data is often ignored or partially used by the scientific community, despite their potential usefulness in geodynamic studies. We have attempted troubleshooting this problem by establishing a centralized storage facility in order to collect all available GNSS data and standardize both formats and metadata information. Here we describe the processes and functions that manage this unified repository, called MGA (Mediterranean GNSS Archive), which regularly collects GNSS RINEX files from alarge number of CORS (Continuously Operating Reference Station) located across a wide region of mainly the European and African plates. RINEX observation data and metadata information are provided to the analysts through an FTP server and dedicated web-services. The complete data set is stored in a PostgreSQL database in order to easily retrieve pieces of information and efficiently manage the archive content. The system implements many high-level services that include scripts to download files from remote archives and to detect new available data, web applications such as API (Application Program Interface) to interact with the system, and background services that interact with the database. During the development of this product, particular attention was paid to what has already been achieved by EPOS TCS WP10, whose objective was: "[...] to develop an open source platform with programmatic and web interfaces to store and disseminate raw data and metadata from GNSS stations operating in Europe''. Many ideas and tools presented here were inspired by that project.
      334  324