Skip to main content
The search returned 12 results
Now showing 1 - 10 of 12
  • Some of the metrics are blocked by your 
    Item type:Publication, Access status: Open Access ,

    Tidal Calibration of the Gladwin Tensor Strain Monitor (GTSM) Array in Taiwan

    To ensure the accuracy and reliability of crustal strain measures, sensors require a thorough calibration. In Taiwan, the complicated dynamics of surface and subsurface hydrological processes under semi-tropical climate conditions conjugated with the rough surface topography could have impacted strainmeter deployment, pushing the installation conditions astray from the optimal ones. Here, we analyze the complex response of 11 Gladwin Strain Monitor (GTSM) strainmeter type deployed in north and central Taiwan and we propose a novel calibration methodology which relies on waveform modeling of Earth and ocean tidal strain-related deformations. The approach is completely data-driven, starting from a simple calibration framework and progressively adding complexity in the model depending on the quality of the data. However, we show that a simple quasi-isotropic model (three calibration factors) is generally suitable to resolve the orientation and calibration of 8 instruments out of 11. We also highlight the difficulty of clearly defining the behavior of instruments that are highly affected by hydrological forcing.
      35  71
  • Some of the metrics are blocked by your 
    Item type:Publication, Access status: Open Access ,

    Dynamic strain anomalies detection at Stromboli before 2019 vulcanian explosions using machine learning

    Identifying and characterizing the dynamics of explosive activity is impelling to build tools for hazard assessment at open-conduit volcanoes: machine learning techniques are now a feasible choice. During the summer of 2019, Stromboli experienced two paroxysmal eruptions that occurred in two different volcanic phases, which gave us the possibility to conceive and test an early-warning algorithm on a real use case: the paroxysm on July, 3 was clearly preceded by smaller and less perceptible changes in the volcano dynamics, while the second paroxysm, on August 28 concluded the eruptive phase. Among the changes observed in the weeks preceding the July paroxysm one of the most significant is represented by the shape variation of the ordinary minor explosions, filtered in the very long period (VLP 2–50 s) band, recorded by the Sacks-Evertson strainmeter installed near the village of Stromboli. Starting from these observations, the usage of two independent methods (an unsupervised machine learning strategy and a cross-correlation algorithm) to classify strain transients falling in the ultra long period (ULP 50–200 s) frequency band, allowed us to validate the robustness of the approach. This classification leads us to establish a link between VLP and ULP shape variation forms and volcanic activity, especially related to the unforeseen 3 July 2019 paroxysm. Previous warning times used to precede paroxysms at Stromboli are of a few minutes only. For paroxysmal events occurring outside any long-lasting eruption, the initial success of our approach, although applied only to the few available examples, could permit us to anticipate this time to several days by detecting medium-term strain anomalies: this could be crucial for risk mitigation by prohibiting access to the summit. Our innovative analysis of dynamic strain may be used to provide an early-warning system also on other open conduit active volcanoes.
      119  163
  • Some of the metrics are blocked by your 
    Item type:Publication, Access status: Open Access ,

    Strain Signals Before and During Paroxysmal Activity at Stromboli Volcano, Italy

    In the last decades, Mt. Stromboli produced four vulcanian eruptions, in 2003 and 2007 and July and August 2019, recorded by INGV monitoring network. Specifically, last three events are studied through records from borehole strainmeters, which allow to infer details on source dynamics. These events are preceded by a slow strain buildup, starting several minutes before the paroxysms, which can be used in future for early warning. Eruptions consist of two or more strain pulses, with oscillations ranging from several seconds, as in 2007, to some minutes, as in 2019, and lasting from several minutes to 1 hr after the explosions.
      251  100
  • Some of the metrics are blocked by your 
    Item type:Publication, Access status: Open Access ,

    Advances in Understanding Intrusive, Explosive and Effusive Processes as Revealed by the Borehole Dilatometer Network on Mt. Etna Volcano

    For detecting below surface sources of deformation, strain measurements offer a very large advantage (orders of magnitude) in sensitivity over displacement measurements. On active volcanoes an intriguing open challenge is to measure the strain variations caused by the different types of eruptive activity with the highest possible precision in order to obtain advantages on the clear detecting of phenomena, their modeling and understanding. We present the updated main results obtained from the high precision strain recorded by the borehole dilatometer network on Mt. Etna volcano. The instruments, installed from the end of 2011, detected significant changes during different types of eruptive activity: several lava fountains during 2011–2014; two explosive sequences in 2015 and 2016; moderate effusive activity in 2017 and a dike intrusion in 2018. The strain changes provided powerful diagnostic information on the different ongoing processes, and allowed us to add key information on the different eruptive styles and sources. We also highlight how the recorded signals, with the associated modeling and interpretation, provide a powerful contribution to surveillance requirements on an active volcano. This report demonstrates that the borehole dilatometer network represents a useful tool both for the understanding of the volcano processes and for surveillance needs.
      607  127
  • Some of the metrics are blocked by your 
    Item type:Publication, Access status: Restricted ,

    The borehole dilatometers network of Mt. Etna : a powerful tool to detect and infer volcano dynamics

    A network of four borehole dilatometers has been installed on Etna in two successive phases (2010–2011 and 2014). The borehole dilatometers are installed in holes drilled at depths usually greater than 100 m, and they measure the volumetric strain of the surrounding rock with a nominal precision up to 10^-11 in a wide frequency range (10^-7–25 Hz). Here we describe the characteristics of the network and the results of the in situ calibrations obtained after the installations by different methods. We illustrate short-term strain changes recorded during several lava fountains erupted by Etna during 2011–2013, and we also show signal changes recorded at all four stations during the lava fountain on 28 December 2014. Analytical and numerical computations constrained the eruptions source depth and also its volume change that is related to the magma volume emitted. Finally, we show the potential of the signal in the medium term to reveal strain changes related to different phases of the volcanic activity.
      486  11
  • Some of the metrics are blocked by your 
    Item type:Publication, Access status: Restricted ,

    Eruptive processes leading to the most explosive lava fountain at Etna volcano: The 23 November 2013 episode

    (2014-07-23) ; ; ; ;
    Bonaccorso, A.; Istituto Nazionale di Geofisica e Vulcanologia, Sezione Catania, Catania, Italia
    The 23 November 2013 lava fountain at Etna volcano was the most explosive of the last 44 episodes that have occurred at Etna in 2011–2013. We infer the total magma volume erupted by thermal images analysis and show that it was characterized by a very high time-averaged-discharge-rate (TADR) of ~360m3 s 1, having erupted ~1.6 × 106m3 of dense-rock equivalent magma volume in just 45 min, which is more than 3 times the TADR observed during previous episodes. Two borehole dilatometers confirmed the eruption dynamics inferred from the thermal images. When compared to the other lava fountains, this episode can be considered as the explosive end-member. However, the erupted volume was still comparable to the other lava fountain events. We interpret that the 23 November explosive end-member event was caused by more primitive and gas-rich magma entering the system, as demonstrated by the exceptional height reached by the lava fountain.
      388  61
  • Some of the metrics are blocked by your 
    Item type:Publication, Access status: Restricted ,

    From source to surface: dynamics of Etna’s lava fountains investigated by continuous strain, magnetic, ground and satellite thermal data

    We investigated the eruptive episodes that occurred at Etna volcano on 15 November 2011 and 18 March 2012 using different types of data. We present novel data from two recently installed strainmeters that recorded unique signals during the lava fountain phases of these events. The strainmeter data, integrated with those recorded by the magnetic network, and with satellite and ground thermal data, allowed us to follow the path of a gas-rich magma batch from the source inside the volcano to the surface and atmosphere. The amplitude ratio of the volumetric strain changes constrained the storage depth of the magma feeding the lava fountains above 1.5 km below sea level. Magnetic data revealed an attempted shallow lateral intrusion, whereas ground and satellite thermal data furnished a quantification of the total erupted volumes of ∼2.2×106m3 for the 15 November event and ∼3.0×106m3 for the 18 March event. Despite different durations of the explosive and effusive phases of the two lava fountain events, the total erupted volume was quite similar, suggesting the emptying of a shallow storage system displaying a steady behaviour.
      405  35
  • Some of the metrics are blocked by your 
    Item type:Publication, Access status: Open Access ,

    New data from borehole strainmeters to infer lava fountain sources (Etna 2011-2012)

    (2013) ; ; ; ;
    Bonaccorso, A.; Istituto Nazionale di Geofisica e Vulcanologia, Sezione Catania, Catania, Italia
    In January 2011 eruptive activity resumed at Etna producing a new phase with frequent lava fountain episodes until April 2012. In November 2011, the first two borehole strainmeters were installed, which detected negative strain changes (~ 0.15 - 0.8 strain) during the paroxysmal events. A Finite Element Model was set up to estimate accurately the tilt and volumetric strain, taking into account the real profile of the volcano and the elastic medium heterogeneity. The numerical computations indicated an elongated depressurizing source located at 0 km b.s.l., which underwent a volume change of ~2 x 106 m3 which is the most of the magma volume erupted while a smaller remaining part is accommodated by the magma compressibility. This shallow source cannot accumulate large magma volumes and, thus, favours short term periodic eruptive events with a fairly constant balance between the refilling and the erupted magma.
      209  150
  • Some of the metrics are blocked by your 
    Item type:Publication, Access status: Restricted ,

    Dynamics of the shallow plumbing system investigated from borehole strainmeters and cameras during the 15 March 2007 Vulcanian paroxysm at Stromboli volcano

    The 15 March 2007 Vulcanian paroxysm at Stromboli volcano was recorded by several instruments that allowed description of the eruptive sequence and unravelling the processes in the upper feeding system. Among the devices installed on the island, two borehole strainmeters recorded unique signals not fully explored before. Here we present an analysis of these signals together with the time-lapse images from a monitoring system comprising both infrared and visual cameras. The two strainmeter signals display an initial phase of pressure growth in the feeding system lasting ~2 min. This is followed by 25 s of low-amplitude oscillations of the two signals, that we interpret as a strong step-like overpressure building up in the uppermost conduit by the gas-rich magma accumulating below a thick pile of rock produced by crater rim collapses. This overpressure caused shaking of the ground, and triggered a number of small landslides of the inner crater rim recorded by the monitoring cameras. When the plug obstructing the crater was removed by the initial Vulcanian blast, the two strainmeter signals showed opposite sign, compatible with a depressurizing source at ~1.5 km depth, at the junction between the intermediate and shallow feeding system inferred by previous studies. The sudden depressurization accompanying the Vulcanian blast caused an oscillation of the source composed by three cycles of about 20 sec each with a decreasing amplitude, as well recorded by the strainmeters. The visible effect of this behaviour was the initial Vulcanian blast and a 2-3 km high eruptive column followed by two lava fountainings displaying decreasing intensity and height. To our knowledge, this is the first time that such a behaviour was observed on an open conduit volcano.
      260  30
  • Some of the metrics are blocked by your 
    Item type:Publication, Access status: Open Access ,

    - Activities of RU7 Seismological analysis of paroxysms and effusive eruptions at Stromboli

    (2010-07-06)
    D’Auria, L.
    ;
    ; ; ;
    The two most recent paroxysms at Stromboli have been preceeded by Ultra-Long-Period (ULP) seismic signals recorded by broadband seismic stations (in 2003) and also by dilatometers (in 2007). The overall features of these signals indicates an increasing pressurization of the volcanic...
      226  309