Mechanical Energy Dissipation During Seismic Dynamic Weakening in Calcite-Bearing Faults
Author(s)
Barrero Echevarria, Xabier
Language
English
Obiettivo Specifico
OST3 Studio della fase preparatoria di un evento sismico
Status
Published
JCR Journal
JCR Journal
Peer review journal
Yes
Issue/vol(year)
/129 (2024)
ISSN
2169-9313
Publisher
Wiley-Agu
Pages (printed)
e2024JB028927
Date Issued
September 9, 2024
Subjects
Abstract
Earthquakes are frictional instabilities caused by the shear stress decrease, that is, dynamic weakening, of faults with slip and slip rate. During dynamic weakening, shear stress depends on slip, slip rate, and temperature, according to constitutive laws governing the earthquake rupture process. In the laboratory, technical limitations in measuring temperature during frictional instabilities inhibit the investigation and interpretation of shear stress evolution. Here we conduct high velocity friction experiments on calcite-bearing simulated faults, both on bare-rock and on gouge samples, at 20-30 MPa normal stress, 1-6 m/s slip rate and 1-20 m total slip. Seismic slip pulses are reproduced by imposing boxcar and regularized Yoffe slip rate functions. We measured, together with shear stress, slip, and slip rate, the temperature evolution on the fault by employing an innovative two-color fiber optic pyrometer. The comparison between modeled and measured temperature reveals that for calcite-bearing faults the heat sink caused by decarbonation reaction controls the temperature evolution. In bare-rocks, energy is dissipated as frictional heat, and temperature increase is buffered by the heat sink of the calcite decarbonation reaction. In gouges, energy is dissipated as frictional heat and for plastic deformation processes, balanced by the heat sink caused by the decarbonation reaction enhanced by the mechanochemical effect. Our results suggest that in calcite-bearing rocks, a common fault zone material for earthquake sources in the continental crust at shallow depth, the type of fault materials (bare-rocks vs. gouges) controls the energy dissipation during seismic slip. Plain Language Summary During earthquakes, faults rocks lose strength, and therefore the ability to sustain shear stress as a consequence of slip, slip rate, and temperature resulting in dynamic weakening. The mathematical relationships between the decreasing strength and slip, slip rate, and temperature and the energy balance describing the partition of energy are of fundamental importance to model the propagation of an earthquake rupture. These relationships can be defined thanks to laboratory experiments that simulate seismic slip. Here, we tested calcite-bearing fault rocks simulated as bare-rock and gouges. During the experiments, temperature was monitored thanks to an innovative measuring system. Numerical models were done assuming all mechanical energy was converted into heat. By comparing all results above, we discovered that the mechanical energy in both bare-rocks and gouges is converted to heat but limited by the occurrence of endothermic decarbonation reaction. In gouges, also an energy contribution for plastic deformation processes is required. Our work implies significant changes in the commonly accepted energy budget for earthquake propagation and show the importance of slip rate and temperature in driving together the dynamic weakening during seismic slip.
Sponsors
This study was funded by the European Research Council (ERC) under the European Union's Horizon 2020 research and innovation programme (grant agreement no 856559). MC participated in this work as Principal Investigator of the European Research Council (ERC) project FEAR (Grant 856559) under the European Community's Horizon 2020 Framework Programme. SA, CC, and ES participated in this work in the framework of the European Research Council (ERC) project FEAR (Grant 856559) under the European Community's Horizon 2020 Framework Programme. This work was supported by Project MIUR 2020–2029 Working Earth—“Working Earth: Geosciences and understanding of the earth dynamics and natural hazards.” This work was supported by Project FSE+ 2021–2027, Contributi premiali per i ricercatori e assegnisti di ricerca per rafforzarne la condizione professionale e potenziare il sistema della ricerca del Lazio (Atto n. G05411 del 05/05/2022) attributed to SA, CC, and ES. SA acknowledges Christopher Harbord for the technical development of the gouge sample holder and the control system for the slip rate functions. Open Access Funding was provided by Istituto Nazionale di Geofisica e Vulcanologia within the CRUI–CARE Agreement. This work was supported by Spanish Research Agency through projects PID2021-122505OB-C32 and Juan de la Cierva FJCI-2017-31677, and by Comunidad de Madrid through TEFLON-CM Grant Y2018/EMT-4892. All authors acknowledge the editor Alexandre Schubnel and the reviewers Christie Rowe and Nir Badt for their comments and suggestions, which improved our manuscript. Open access publishing facilitated by Istituto Nazionale di Geofisica e Vulcanologia, as part of the Wiley - CRUI-CARE agreement.
Type
article
File(s)![]()
Name
JGR Solid Earth - 2024 - Aretusini - Mechanical Energy Dissipation During Seismic Dynamic Weakening in Calcite‐Bearing.pdf
Type
Main Article
Size
4.14 MB
Format
Adobe PDF
Checksum (MD5)
The MD5 message-digest algorithm can be used to verify the integrity of the file that you have uploaded. You can calculate its value locally via tools that are generally available in each operative system like md5sum
e47e68c2aa7f867fdce32fa6ba74dd83
