Skip to main content
The search returned 66 results
Now showing 1 - 10 of 66
  • Some of the metrics are blocked by your 
    Item type:Publication, Access status: Open Access ,

    Exploring frictional properties of upper plate fault reactivation in subduction zones: The Atacama Fault System in northern Chile

    (2024-10-29)
    González, Yerko
    ;
    González, Gabriel
    ;
    ; ;
    The Maule 2010 and Tohoku-Oki 2011 earthquakes demonstrated how dormant upper plate faults can be reactivated as normal faults by plate margin relaxation following megathrust slip. However, the reactivation mechanisms of these types of faults are yet unexplored. To provide a better understanding of these mechanisms, we collected fault core samples from fault segments of the Atacama Fault System in northern Chile. The sampled fault segments have clear morphological evidence of Quaternary reactivation as normal fault. We performed laboratory experiments to measure the fault strength, stability and dynamic weakening. We consider low-velocity tests for exploring the frictional strength and velocity dependence of friction via a double-direct shear apparatus and ii) high-velocity tests for investigating the frictional properties at seismic velocities via a rotary shear apparatus. The experiments revealed that fault cores have low frictional strength, velocity-strengthening behaviour and strong dynamic weakening. Additionally, a novel experimental procedure that simulates stress relaxation by stepwise reducing of the normal stress on the sample assembly showed: 1. Accelerating creep towards dynamic weakening in chlorite-rich gouges and 2. oscillatory sliding in fault gouges enriched in illite. By extrapolating our experimental observations to natural conditions, we conclude that stable sliding is favoured during the interseismic phase of the subduction earthquake cycle, whereas unstable sliding is favoured during the coseismic and postseismic phases. The latter occurs via normal stress reduction during the shift from interseismic compression to co- and postseismic tension at the plate margin.
      11  39
  • Some of the metrics are blocked by your 
    Item type:Publication, Access status: Open Access ,

    Mechanical Energy Dissipation During Seismic Dynamic Weakening in Calcite-Bearing Faults

    (2024-09-09) ; ; ;
    Barrero Echevarria, Xabier
    ;
    Earthquakes are frictional instabilities caused by the shear stress decrease, that is, dynamic weakening, of faults with slip and slip rate. During dynamic weakening, shear stress depends on slip, slip rate, and temperature, according to constitutive laws governing the earthquake rupture process. In the laboratory, technical limitations in measuring temperature during frictional instabilities inhibit the investigation and interpretation of shear stress evolution. Here we conduct high velocity friction experiments on calcite-bearing simulated faults, both on bare-rock and on gouge samples, at 20-30 MPa normal stress, 1-6 m/s slip rate and 1-20 m total slip. Seismic slip pulses are reproduced by imposing boxcar and regularized Yoffe slip rate functions. We measured, together with shear stress, slip, and slip rate, the temperature evolution on the fault by employing an innovative two-color fiber optic pyrometer. The comparison between modeled and measured temperature reveals that for calcite-bearing faults the heat sink caused by decarbonation reaction controls the temperature evolution. In bare-rocks, energy is dissipated as frictional heat, and temperature increase is buffered by the heat sink of the calcite decarbonation reaction. In gouges, energy is dissipated as frictional heat and for plastic deformation processes, balanced by the heat sink caused by the decarbonation reaction enhanced by the mechanochemical effect. Our results suggest that in calcite-bearing rocks, a common fault zone material for earthquake sources in the continental crust at shallow depth, the type of fault materials (bare-rocks vs. gouges) controls the energy dissipation during seismic slip. Plain Language Summary During earthquakes, faults rocks lose strength, and therefore the ability to sustain shear stress as a consequence of slip, slip rate, and temperature resulting in dynamic weakening. The mathematical relationships between the decreasing strength and slip, slip rate, and temperature and the energy balance describing the partition of energy are of fundamental importance to model the propagation of an earthquake rupture. These relationships can be defined thanks to laboratory experiments that simulate seismic slip. Here, we tested calcite-bearing fault rocks simulated as bare-rock and gouges. During the experiments, temperature was monitored thanks to an innovative measuring system. Numerical models were done assuming all mechanical energy was converted into heat. By comparing all results above, we discovered that the mechanical energy in both bare-rocks and gouges is converted to heat but limited by the occurrence of endothermic decarbonation reaction. In gouges, also an energy contribution for plastic deformation processes is required. Our work implies significant changes in the commonly accepted energy budget for earthquake propagation and show the importance of slip rate and temperature in driving together the dynamic weakening during seismic slip.
      7  23
  • Some of the metrics are blocked by your 
    Item type:Publication, Access status: Open Access ,

    Multiple Seismic Slip‐Rate Pulses and Mechanical and Textural Evolution of Calcite‐Bearing Fault Gouges

    <jats:title>Abstract</jats:title><jats:p>Natural fault zones are complex, spatially heterogeneous systems. Rock deformation experimental studies simplify the complexity of natural fault zones either as a surface discontinuity between intact rocks (bare‐rock surfaces) or as a few mm‐thick gouge layer. However, depending on the simplified fault type and its slip history, the response to applied deformation can vary. In this work, we conduct laboratory experiments for investigating the evolution of mechanical parameters of simulated faults made of calcite gouge subjected to multiple (four) identical seismic slip‐rate pulses. We observed that, as the number of applied slip‐rate pulses increased, (a) initial friction and steady‐state friction remained approximatively constant, (b) peak friction and normalized strength excess increased and, (c) the slip distances to achieve peak and steady‐state friction, <jats:italic>D</jats:italic><jats:sub><jats:italic>a</jats:italic></jats:sub> and <jats:italic>D</jats:italic><jats:sub><jats:italic>c</jats:italic></jats:sub>, decreased. The greatest changes occurred between the first and the second slip‐rate pulse. From this pulse onward, the dissipated energy of the calcite gouge fault was similar to those obtained in bare‐rock surfaces experiments. Microstructural analysis showed that, strain is localized in up to two (recrystallized) principal slip zones (PSZ) with sub‐micrometric grain size, surrounded by low porosity sintered and non‐sintered comminuted gouge domains. We conclude that previous seismic slip episodes impact on both the structure and the strain localization processes within a fault, contributing to its shear fabric evolution. We highlight that the strain localization process identifies the PSZ, dissipating the least amount of energy within the entire experimental fault zone.</jats:p>
      12  56
  • Some of the metrics are blocked by your 
    Item type:Publication, Access status: Open Access ,

    Rock deformation vs. radon emission: some constraints from shear stress-controlled experiments

    Numerous field and laboratory studies have been conducted to investigate the relationship between radon variation and seismic events, as well as the complex link between radon emission and rock deformation mechanisms. However, a clear understanding of this correspondence and systematic observations of these phenomena are still lacking, and recent experimental studies have yet to yield conclusive results. In this study, we investigate the possible relationships between radon migration dynamics and rock deformation at the micro-scale through laboratory experiments using the SHIVA apparatus under shear stress-controlled conditions and simultaneous high-resolution radon measurements. We studied the behaviour of three different lithologies to show that radon emission varies in response to rock deformation and this variation is highly dependent on the mineralogy and microstructure. This study represents the first attempt to define radon gas as an indicator of transient and rapid rock deformation at the micro-scale.
      90  52
  • Some of the metrics are blocked by your 
    Item type:Publication, Access status: Open Access ,

    Laboratory simulation of fault reactivation by fluid injection and implications for induced seismicity at the BedrettoLab, Swiss Alps

    Fluid induced fault reactivation experiments will take place as part of the “Fault Activation and Earthquake Rupture” project (FEAR) at the BedrettoLab, an underground laboratory for geosciences and geo-energy excavated within the Rotondo massif (Swiss Alps). The aim of this publication is to characterize frictional properties and permeability of the main segment of the fault zone selected for limited fluid-induced fault reactivation experiments. Firstly, we characterized fault zone microstructures in the field and in thin sections. Secondly, we assessed fault gouge mineralogy by X-ray powder diffraction analysis, yielding a composition in agreement with similar fault gouges in the same area. Finally, we performed a detailed frictional and permeability characterization in laboratory, using BRAVA (Brittle Rock deformAtion Versatile Apparatus). We performed five frictional experiments, run at the actual in-situ conditions: four experiments for frictional properties characterization; and one further experiment where we stimulated the experimental fault by fluid pressurization applying a similar injection protocol designed for the in-situ hydraulic stimulation experiment. Additionally, we performed microstructural analysis on experimental samples to link frictional and permeability properties with fault fabric evolution. The integration of experimental results with field investigations suggests that the selected fault is potentially seismogenic and can be dynamically reactivated and controlled with hydraulic stimulation. This study highlights the importance of bridging the gap between laboratory and in-situ fault characterization, where experimental results become instrumental for the correct design of injection protocols such as those of FEAR project.
      145  88
  • Some of the metrics are blocked by your 
    Item type:Publication, Access status: Open Access ,

    Melting of fault gouge at shallow depth during the 2008 MW 7.9 Wenchuan earthquake, China

    Typical rocks at shallow depths of seismogenic faults are fluid-rich gouges. During earthquakes, on-fault frictional heating may trigger thermal pressurization and dynamic fault weakening. We show that frictional melting, rather than thermal pressurization, occurred at shallow depths during the 2008 MW 7.9 Wenchuan earthquake, China. One year after the Wenchuan earthquake, we found an ~2-mm-thick, glass-bearing pseudotachylyte (solidified frictional melt) in the fault gouges retrieved at 732.6 m depth from the first borehole of the Wenchuan Earthquake Fault Scientific Drilling Project. The matrix of pseudotachylyte is enriched in barium and cut by barite-bearing veins, which provide evidence of co- and postseismic fluid percolation. Because pseudotachylyte can be rapidly altered in the presence of percolating fluids, its preservation suggests that gouge melting occurred in a recent large earthquake, possibly the Wenchuan earthquake. Rock friction experiments on fluid-rich fault gouges deformed at conditions expected for seismic slip at borehole depths showed the generation of pseudotachylytes. This result, along with the presence of a second slip zone attributed to the Wenchuan earthquake at 589.2 m depth, implies that during large earthquakes, frictional melting can occur at shallow depths and that seismic slip can be accommodated by multiple faults. This conclusion is consistent with the evidence from surface faulting that multiple ruptures propagated during the Wenchuan earthquake.
      67  198
  • Some of the metrics are blocked by your 
    Item type:Publication, Access status: Open Access ,

    Fracture Energy and Breakdown Work During Earthquakes

    Large seismogenic faults consist of approximately meter-thick fault cores surrounded by hundreds-of-meters-thick damage zones. Earthquakes are generated by rupture propagation and slip within fault cores and dissipate the stored elastic strain energy in fracture and frictional processes in the fault zone and in radiated seismic waves. Understanding this energy partitioning is fundamental in earthquake mechanics to explain fault dynamic weakening and causative rupture processes operating over different spatial and temporal scales. The energy dissipated in the earthquake rupture propagation along a fault is called fracture energy or breakdown work. Here we review fracture energy estimates from seismological, modeling, geological, and experimental studies and show that fracture energy scales with fault slip. We conclude that although material-dependent constant fracture energies are important at the microscale for fracturing grains of the fault zone, they are negligible with respect to the macroscale processes governing rupture propagation on natural faults.
      131  169
  • Some of the metrics are blocked by your 
    Item type:Publication, Access status: Open Access ,

    A neural network based approach to classify VLF signals as rock rupture precursors

    The advent of novel technologies revealed that other geophysical signals than those directly related to fault motion could be used to probe the state of deformation of the Earth’s crust. Electromagnetic signals belonging to this category have been increasingly investigated in the last decade in association to natural earthquakes and laboratory rock fractures. These studies are hampered by the lack of continuous recordings and a systematic mathematical processing of large data sets. Indeed, electromagnetic signals exhibit characteristic patterns on a specific frequency band (the very low frequency, VLF) that correlate uniquely with the paroxistic rupture of rocks specimens under uniaxial laboratory tests and were also detected in the atmosphere, in association to moderate magnitude earthquakes. The similarity of laboratory and atmospheric VLF offers an unique opportunity to study the relation between VLF and rock deformation on at least two different scales and to enlarge the dataset by combining laboratory and atmospheric data. In this paper we show that the enlarged VLF dataset can be successfully used, with a neural network approach based on LSTM neural networks to investigate the potential of the VLF spectrum in classifying rock rupture precursors both in nature and in the laboratory. The proposed approach lays foundation to the automatic detection of interesting VLF patterns for monitoring deformations in the seismically active Earth’s crust.
      194  124
  • Some of the metrics are blocked by your 
    Item type:Publication, Access status: Open Access ,

    Frictional Properties of the Longmenshan Fault Belt Gouges From WFSD‐3 and Implications for Earthquake Rupture Propagation

    The 2008 Mw 7.9 Wenchuan earthquake generated ∼270 and ∼80 km long surface ruptures along the Longmenshan fault belt, namely the Yingxiu-Beichuan fault (YBF) and the Guanxian-Anxian faults (GAF), respectively. So far, most of the frictional investigations were performed on the YBF gouge materials. Here, we present the results of rotary shear friction experiments performed on the GAF gouges recovered from the depth of ∼1.25 km of the Wenchuan Earthquake Fault Scientific Drilling project-3 along the GAF. The fault gouges, mainly composed of quartz, illite, chlorite, and kaolinite, were sheared at slip velocities V ranging from 10−5 to 2 m/s and normal stresses from 8.5 to 10 MPa under both room humidity and wet conditions. At any imposed slip velocity, the wet gouges have an apparent friction coefficient lower than the room humidity one. In addition, enhanced velocity-strengthening behavior at intermediate velocities (10 −2 m/s < V ≤ 10 −1 m/s) was recognized. We characterized the products using field-emission scanning electron microscopy combined with synchrotron X-ray diffraction analysis. These microanalytical investigations evidence the formation of size reduced particles (without mineral phase changes) and R- and Y-shears in the principal slip zone (PSZ). Regardless of the ambient conditions, the width of PSZ was proportional to the input frictional work density (the product of shear stress times displacement). Our results support the hypothesis that the GAF preferentially ruptures through wet fault gouges; however, the enhanced velocity-strengthening regime at intermediate velocities may act as a barrier to slip acceleration during fault rupture propagation.
      201  291
  • Some of the metrics are blocked by your 
    Item type:Publication, Access status: Open Access ,

    Determination of parameters characteristic of dynamic weakening mechanisms during coseismic slip

    While sliding at seismic slip-rates of ∼1 m/s, natural faults undergo an abrupt decrease of shear stress called dynamic weakening. Asperity-scale (<<mm) processes related to flash heating and weakening and, meso-scale (mm-cm) processes involving shear across the bulk slip-zone, related to frictional melting or viscous flow of minerals, have been invoked to explain pronounced velocity-dependent weakening. Here we present a compilation of ∼100 experiments performed with two rotary shear apparatuses. Cohesive rock cylinders of basalt, gabbro, granitoid rocks and calcitic marble were sheared at various values of effective normal stress (σneff = 5–40 MPa), target slip-rate (Vt = 0.1–6.5 m/s) and fluid pressure (Pf = 0–15 MPa). To account for the uncertainties of constitutive parameters, we introduce a norm-based optimization procedure on a set of model parameters by comparing the shear stress evolution inferred from the proposed weakening models with the shear stress measured during the experiments. We analyze the fit to experimental data of each weakening model and we discuss a composite model in which two weakening mechanisms (namely flash heating and bulk melting, flash heating and dislocation/diffusion creep) are used to test the hypothesis that they match the shear stress evolution in different slip ranges. We found that for slip smaller than a slip-switch distance δ0, the weakening is better described by mechanisms occurring at the asperity scale whereas for larger slip values the bulk model performs better. The inferred δ0 values decrease with normal stress suggesting that during earthquakes bulk mechanisms can govern shear stress evolution after a few centimeters of slip.
      191  153