Dipartimento di Scienze e Tecnologie Università del Sannio
2 results
Filters
Settings
The search returned 2 results
Now showing 1 - 2 of 2
- Some of the metrics are blocked by yourconsent settings
Item type:Publication, Access status: Restricted , Investigation of the buried structure of the Volturara Irpina Basin (southern Italy) by microtremor and gravimetric data
(2016-04-06); ; ;Maresca, R.; Dipartimento di Scienze e Tecnologie Università del Sannio ;Berrino, G.; Istituto Nazionale di Geofisica e Vulcanologia, Sezione OV, Napoli, ItaliaWe investigated the structure of the Volturara Irpina Plain, a small intra-mountain basin in southern Italy. Microtremor Horizontal-to-Vertical Spectral Ratio (HVSR) measurements were performed on a 50-point grid across the plain, and contour maps of the peak frequencies and maximum amplitudes of the HVSR curves were constructed. In the deepest part of the plain, the fundamental resonance frequencies were 0.8 Hz to 0.9 Hz. Assuming that the HVSR peak frequencies interpret the fundamental resonance frequencies, and taking into account the shear-wave velocity–depth relationship derived from down-hole data, a first thickness–frequency relationship for the plain was estimated. The sediment thickness corresponds to the depth from the ground surface of the seismic basement. A power-law thickness–frequency relationship was also derived through nonlinear regression fitting of the borehole data that intercepted the bedrock. Finally, the contour map of the depth of the seismic basement was constructed by averaging the thickness estimates from the two different approaches. Gravity measurements were also acquired on a 54-point grid across the plain, most of which coincided with microtremor stations. From these data, the Bouguer gravity anomaly was computed with reference to the 1980 Ellipsoid, and using a density of 2670 kg/m3, we propose a three-dimensional interpretation of the buried structure of the plain that is mainly formed by three overlapped layers. The separately obtained microtremor and gravity results were also compared, using constraints from the drillings. Thus, we interpret the first layer as Plio-Pleistocenic sediments mostly composed of clay, silty clay, and gravel. The underlying basement has maximum depth ~500 m below ground level (altitude, ~200 m a.s.l.), and corresponds to Mesozoic carbonate rocks. These rocks are nonhomogeneous, with an upper, less compact, layer formed by unstable rocks with clay, or fractured rocks with water circulation. This is typical for karst basins, such as Volturara Irpina Plain. The deepest stratum recognized by gravity inversion corresponds to the densest and most compact carbonate rocks that form the surrounding mountains, with average density of 2600 kg/m3 to 2700 kg/m3. These rocks arise at the edges of the plain, which explains the highest HVSR amplitudes in these zones, which are interpreted as strong impedance contrast at depth. Conversely, we obtained complex HVSR curves when irregular discontinuity surfaces were recognized in the subsoil by the gravity inversion.278 50 - Some of the metrics are blocked by yourconsent settings
Item type:Publication, Access status: Open Access , BISTROP: Bayesian Inversion of Spectral‐Level Ratios andP‐Wave Polarities for Focal Mechanism Determination
The analysis of earthquake focal mechanisms provides information about the stress regime, fault geometry, and deformation processes acting in a given region. Generally, the techniques aimed at determining focal mechanism are designed to work in a specific magnitude range operating both in the time and frequency domain and using different data (e.g., P polarities, S-wave polarization, S/P-amplitude ratios, etc.). In this article, we present a new method, Bayesian inversion of spectral-level ratios and P-wave polarities (BISTROP), that can be applied to both small and moderate-to-large magnitude events. BISTROP uses a Bayesian approach to jointly invert the long-period spectral- level P/S ratios and the P polarities to infer the fault-plane solutions. We apply this method to analyze synthetic data as well as those generated by real earthquakes. We find that the obtained solutions for moderate earthquakes are comparable with those obtained using moment tensor inversion, and they are more constrained with respect to the solutions obtained using only P-polarity data for small earthquakes.80 314
