Skip to main content
The search returned 2 results
Now showing 1 - 2 of 2
  • Some of the metrics are blocked by your 
    Item type:Publication, Access status: Restricted ,

    Coseismic and post-seismic slip of the 2009 L'Aquila (central Italy) MW 6.3 earthquake and implications for seismic potential along the Campotosto fault from joint inversion of high-precision levelling, InSAR and GPS data

    After the April 6th 2009 MW 6.3 (ML 5.9) L'Aquila earthquake (central Italy), we re-measured more than 100 km of high-precision levelling lines in the epicentral area. The joint inversion of the levelling measurements with InSAR and GPS measurements, allowed us to derive new coseismic and post-seismic slip distributions and to de- scribe, with high resolution details on surface displacements, the activation and the slip distribution of a second- ary fault during the aftershock sequence that struck the Campotosto area (major event MW 5.2). Coseismic slip on the Paganica fault occurred on one main asperity, while the afterslip distribution shows a more complex pattern, occurring on three main patches, including both slips on the shallow portions and on the deeper parts of the rup- ture plane. The comparison between coseismic and post-seismic slip distributions strongly suggests that afterslip was triggered at the edges of the coseismic asperity. The activation of a segment of the Campotosto fault during the aftershock sequence, with a good correlation between the estimated slipping area, moment release and distribution of aftershocks, raises the opportunity to discuss the local seismic hazard following the occurrence of the 2009 L'Aquila mainshock. The Campotosto fault appears capable of generating earthquakes as large as his- torical events in the region (M N 6.5) or as small as the ones associated with the 2009 sequence. In the case that the Campotosto fault is accumulating a significant portion of the current interseismic deformation, the 2009 MW N 5 events will have released only a small amount of the accumulated elastic strain, and then a significant hazard still remains in the area. Continuing geodetic monitoring and a densification of the GPS networks in the region are therefore needed to estimate the tectonic loading across the different recognized active fault systems in this part of the Apennines.
      577  118
  • Some of the metrics are blocked by your 
    Item type:Publication, Access status: Open Access ,

    Active crustal extension and strain accumulation from GPS data in the Molise region (central-southern Apennines, Italy)

    In this paper, we report new GPS measurements which indicate active NE-SW extension and strain accumulation in the Molise region (Apennines, Italy). The GPS observations were collected during campaigns on benchmarks of the dense IGM95 network (average distance 20 km), spanning a maximum observation interval of 13 years, and have been integrated with measurements from the available permanent GPS sites. Considering the differential motion of the GPS sites, located on the Tyrrhenian and Adriatic coasts, we can evaluate a 4-5 mm/yr extension accommodated across this part of the Apennines. The velocity field exhibits clusters of sites with homogeneous velocity vectors, outlining two main divergence areas, both characterized by the largest velocity gradients: one near Venafro and the other near Isernia where two primary active faults and several historical earthquakes have been documented. These results suggest that an active extension in this part of the Apennines can be currently distributed between the two faults systems associated with the largest earthquakes of this region.
      387  441