Skip to main content
The search returned 12 results
Now showing 1 - 10 of 12
  • Some of the metrics are blocked by your 
    Item type:Publication, Access status: Restricted ,

    Rock magnetism and palaeomagnetism of the Montalbano Jonico section (Italy): evidence for late diagenetic growth of greigite and implications for magnetostratigraphy

    The Montalbano Jonico (MJ) section, cropping out in Southern Italy, represents a potential candidate to define the Lower/Middle Pleistocene boundary and it has been proposed as a suitable Global Stratotype Section and Point (GSSP) of the Ionian Stage (Middle Pleistocene). The MJ section is the only continuous benthic and planktonic δ18O on-land reference in the Mediterranean area for the Mid-Pleistocene transition, spanning an interval between about 1240 and 645 ka. Combined biostratigraphy and sapropel chronology, tephra stratigraphy and complete high-resolution benthic and planktonic foraminiferal stable oxygen isotope records already provide a firm chronostratigraphic framework for the MJ section. However, magnetostratigraphy was still required to precisely locate the Brunhes-Matuyama transition and to mark the GSSP for the Ionian stage. We carried out a palaeomagnetic study of a subsection (Ideale section) of the MJ composite section, sampling 61 oriented cores from 56 stratigraphic levels spread over a ca. 80-m-thick stratigraphic interval that correlates to the oxygen isotopic stage 19 and should therefore include the Brunhes-Matuyama reversal. The palaeomagnetic data indicate a stable and almost single-component natural remanent magnetization (NRM). A characteristic remanent magnetization (ChRM) was clearly identified by stepwise demagnetization of the NRM. The ChRM declination values vary around 0◦ and the ChRM inclination around the expected value (59◦) for a geocentric axial dipole field at the sampling locality. This result indicates that the section has been remagnetized during the Brunhes Chron. A preliminary study of 27 additional not azimuthally oriented hand samples, collected at various levels from other parts of the MJ composite section, indicates that all the samples are of normal polarity and demonstrates that the remagnetization is widespread across the whole exposed stratigraphic sequence. A series of specific rock magnetic techniques were then applied to investigate the nature of the main magnetic carrier in the study sediments, and they suggest that the main magnetic mineral in the MJ section is the iron sulphide greigite (Fe3S4). Scanning electron microscope observations and elemental microanalysis reveal that greigite occurs both as individual euhedral crystals and in iron sulphides aggregates filling voids in the clay matrix. Therefore, we infer that the remagnetization of the section is due to the late-diagenetic growth of greigite under reducing conditions, most likely resulting in the almost complete dissolution of the original magnetic minerals. Iron sulphide formation in the MJ section can be linked to migration of mineralized fluids. Our inferred timing of the remagnetization associated with greigite growth represents the longest remanence acquisition delay documented in greigite-bearing clays of the Italian peninsula so far.
      255  35
  • Some of the metrics are blocked by your 
    Item type:Publication, Access status: Open Access ,

    Generation of synthetic wide-band electromagnetic time series

    (2002) ; ; ;
    Loddo, M.; Dipartimento di Geologia e Geofisica, Università di Bari, Italy
    ;
    Schiavone, D.; Dipartimento di Geologia e Geofisica, Università di Bari, Italy
    The estimation of the earth transfer functions in MT prospecting method poses the greatest difficulty. As in the seismic prospecting method this task requires the development of advanced processing techniques. In order to assess the performance of each technique, controlled synthetic data and different noise types, which simulate the observed signals, are required. This paper presents a procedure to generate a wide-band noise-free electromagnetic field to be used both for magnetotelluric and audio-magnetotelluric studies. Furthermore, an effort was made to extend the simulation procedures to generally stratified and simple inhomogeneous earth structures. The discrete-time magnetic field values are generated through the inverse Fourier transform of a continuous amplitude spectrum and a sampling procedure. The electric field time series are obtained by the convolution of the magnetic field time series, calculated in the interested frequency band, with a non-causal impedance impulse response. Polarized fields, which are important when inhomogeneous media are considered, are also generated.
      173  230
  • Some of the metrics are blocked by your 
    Item type:Publication, Access status: Open Access ,

    Evidence of Apulian crustal structures related to low energy seismicity (Murge - Southern Italy)

    The discovery of recent co-seismic sedimentary structures and the detection of low energy seismic activity in the Murgian plateau (Apulia - Southern Italy) motivated a more detailed examination of the tectonics in this part of the Apulian plate commonly believed to be aseismic. In particular, we examined the north-western zone where a seismic sequence with maximum magnitude 3.2 and tensional focal mechanism occurred in 1991. The analysis of the existing gravimetric data, integrated by three new profiles carried out across the epicentral area, disclosed an anomaly possibly due to an old tensional tectonic structure located within the upper crust. Even though the depth and the age hypothesised for the anomaly source would exclude a direct causal connection with the observed seismicity, this structure could be a shallower expression of a tectonic structure extending down to the crystalline basement: it could represent a zone of relative «weakness» where the regional stress, due to the interactions between Apennines and Apulian plate, encounters conditions facilitating the release of seismic energy.
      170  535
  • Some of the metrics are blocked by your 
    Item type:Publication, Access status: Open Access ,

    Structural features of the Middle Tirso Valley (Central Sardinia - Italy) from geoelectrical and gravity data

    The Middle Tirso Valley is located in Central Sardinia and lies between two structural highs, the Marghine-Goceano chain and the Barbagia Paleozoic horst. The geological structures of the area, potentially interesting for its geothermal resources, are rather complex and dominated by two regional faults – the Marghine fault and the Nuoro fault – which affect the Palaeozoic basement and the Tertiary volcano-sedimentary deposits. Combined modelling of gravity and geoelectrical data defines the shape and extent of this Tertiary basin. The Bouguer anomaly is mainly characterized by a three-dimensional gravity low which has been named «Bolotana-Sedilo gravity low», corresponding to a structure generated by collapses attributable to transcurrent and extensional tectonic events. The down faulted zone is filled with a Tertiary low density volcano-sedimentary sequence extending southwards and overlain by Pliocene-Quaternary basalts. Another regional structure named «Tirso Fault» is proposed
      166  657
  • Some of the metrics are blocked by your 
    Item type:Publication, Access status: Open Access ,

    An integrated magnetotelluric study of the Mt. Etna volcanic structure

    (2000-04) ; ; ; ;
    Mauriello, P.; Istituto per le Tecnologie Applicate ai Beni Culturali, CNR, Roma, Italy
    he results of a magnetotelluric (MT) survey performed at Mt. Etna (Sicily, Italy) are presented and discussed. The MT interpretation is preceded by the description of the data managing strategy used for the estimate of the impedance tensor and the computation of a rotationally invariant parameter. The 1D Bostick inversion of MT soundings located in the Etnean central area highlights the existence of a wide conductive zone in the depth range 15-30 km. Resistivities of a fewW×m are estimated in the southern part of this zone, while resistivities one order of magnitude higher are estimated in the northern part. In the central sector, the MT soundings are characterized by much higher resistivity values suggesting the presence of an E-W directed resistive barrier separating the two conductive deep zones. A two-feeding system is thus hypothesized as an extension of a previous 3D model deduced from regional earthquakes and teleseisms in the depth range 15-25 km. Moreover, the comparison with previous shallow seismic tomographies from local earthquakes within the first 11 km of depth allows us to distinguish inside the upper portion of the resistive barrier a central high velocity zone. This zone can likely be ascribed to a slowly cooled dike tending to become highly fractured at its western and eastern edges. Finally, the impedivity analysis based on the comparison with previous geoelectric dipole soundings allows us to exclude the existence of a permanent magma chamber within the first 5 km of depth and to argue the existence of a shallowplumbing system consisting of a medium-to-low temperature hydrothermally altered environment.
      261  928
  • Some of the metrics are blocked by your 
    Item type:Publication, Access status: Open Access ,

    Application of electric and electromagnetic methods to the definition of the Campi Flegrei caldera (Italy)

    The results of an analysis of Dipolar Geoelectrical (DG), Magnetotelluric (MT) and Self-Potential (SP) data collected over the emerged portion of the Campi Flegrei (CF) caldera (South Italy) are presented. The DG and MT data are from previous surveys, while the SP data have been recently collected during a survey consisting of 265 pickup land sites. Although the emerged part of the CF caldera appears as a highly inhomogeneous structure, a few simple features have been highlighted through an integrated analysis of subsets of consistent data. A well resolved feature is the structural pattern of the caldera depression along a roughly E-W profile, deduced from a 2D combined interpretation of the MT and DG soundings. Resistivity dispersion effects have also been observed at both ends of this profile. They have been ascribed to the presence of hydrothermally altered zones related to the main fracture systems bordering the caldera. A pressure/temperature source body at a mean depth of about 5 km bsl under the Bay of Pozzuoli has been inferred from the analysis of the 3D SP tomography imaging.
      296  695
  • Some of the metrics are blocked by your 
    Item type:Publication, Access status: Open Access ,

    Geothermics of the Apenninic subduction

    (1997-10) ; ; ;
    Harabaglia, P.; Centro di Geodinamica, Università della Basilicata, Potenza, Italy
    ;
    Mongelli, F.; Dipartimento di Geologia e Geofisica, Università di Bari, Italy
    The subduction of the Adriatic microplate is analysed from a geothermal point of view. In particular four main geodynamic units are distinguished: foreland, foredeep and slab, accretionary prism, and back-arc basin. Each of them is examined from a geothermal point of view and the related open question are discussed. The most relevant results are the determination of the undisturbed geothermal gradient in the aquifer of the foreland; the discovery of a « hot » accretionary prism; and a new model of instantaneous extension of the back-arc basins. The main conclusion is that geothermal data are consistent with a westward dipping subduction that migrated eastward producing a sequence of several episodes at the surface.
      141  449
  • Some of the metrics are blocked by your 
    Item type:Publication, Access status: Open Access ,

    Lithosphere-asthenosphere system in shield areas of North America and Europe

    (1997-10) ; ; ;
    Calcagnile, G.; Dipartimento di Geologia e Geofisica, Università di Bari, Italy
    ;
    Del Gaudio, V.; Dipartimento di Geologia e Geofisica, Università di Bari, Italy
    In previous papers surface dispersion data have been combined with the results of deep seismic refraction data to derive a regionalization of the lithosphere-asthenosphere system and to investigate the presence of significant heterogeneity down to depths of 350 km along two profiles in the North European Fennoscandian area; a regionalized upper mantle model for the whole area down to more than 400 km is given as cross sections. We have extended that approach to North America. The older part of the shield shows lid thickness up to more than 100 km with, if any, weak shear velocity contrast to the underlying layer. The surrounding areas are characterized by a thinner lid; a stronger low-velocity zone to lid contrast may be found in peripheral areas. A map of the lithosphere-asthenosphere system has been derived, permitting a better regional resolution of the shear-wave velocity distribution with depth beneath different regions of North America. The correlation between the lithosphere-asthenosphere system structure and other geophysical data is commented as well as the results for North America and those obtained for the corresponding North European area, in order to outline the geophysical characteristics of shield areas that might give useful constraints for the geodynamic behaviour of the plates to which they belong.
      148  414
  • Some of the metrics are blocked by your 
    Item type:Publication, Access status: Open Access ,

    Quaternary tectonic activity of the Murge area (Apulian foreland -Southern Italy)

    (1997-10) ; ; ; ;
    Pieri, P.; Dipartimento di Geologia e Geofisica, Università di Bari, Italy
    Integration of structural, stratigraphical, and sedimentological data and instrumental records of some recent low-energy seismic events in the Murge area allow us to suggest a new seismotectonic picture of this region, generally considered an aseismic and stable sector of the Apulian foreland.
      131  1142
  • Some of the metrics are blocked by your 
    Item type:Publication, Access status: Open Access ,

    Gravity modelling of the lower crust in Sardinia (Italy)

    In this paper an example is given of an application of statistical techniques to the Bouguer anomalies analysis in order to design a simple crustal model using few a priori assumptions. All gravity measurements carried out in Sardinia have been collected and processed. The Bouguer anomalies have been calculated according to local density estimates. Spectral analysis of the Bouguer anomalies has been carried out along selected profiles in order to estimate the mean depth of the Moho discontinuity and that of an infracrustal discontinuity. The use of this technique inferred the presence of a discontinuity at a mean depth of ~ 28 km, interpreted as Moho and the likely presence of an infracrustal discontinuity at a mean depth of ~18 km, interpreted as the upper-lower crust transition. In order to roughly reconstruct the shape of these interfaces, 2D inversion techniques were applied to the large wavelength components of the Bouguer anomalies, relative to profiles oriented along the E-W direction, extracted from low-pass filtered Bouguer anomaly maps. The density model obtained is compatible with some velocity models achieved from the interpretation of the seismic refraction profiles carried out within the European Geotraverse project.
      152  233