Loddo, Mariano
Preferred name
Loddo, Mariano
Main Affiliation
14 results
Filters
Settings
The search returned 14 results
Now showing 1 - 10 of 14
- Some of the metrics are blocked by yourconsent settings
Item type:Publication, Access status: Restricted , Active upper crust deformation pattern along the southern edge of the Tyrrhenian subduction zone (NE Sicily): Insights from a multidisciplinary approach
(2015-07-17); ; ; ; Using a multidisciplinary dataset based on gravimetric, seismic, geodetic and geological observations,we provide an improved picture of the shallow structure and dynamics of the southern edge of the Tyrrhenian subduction zone.With a local earthquake tomographywe clearly identify twomain crustal domains in the upper 15 kmcharacterized by different P-wave velocity values: a high-velocity domain comprising southeasternmost Tyrrhenian Sea, NE Sicily and Messina Straits, and a low-velocity domain comprising Mt. Etna and eastern Sicily. The transition between the two domains shows a good spatial correspondence with a wider set of faults including the Taormina Fault System (TFS) and the Aeolian–Tindari–Letojanni Fault System (ATLFS), two nearly SE-striking fault systems crossing northeastern Sicily and ending on the Ionian shoreline of Sicily according to many investigators. Within this set of faults, most of the deformation/seismicity occurs along the northern and central segments of ATLFS, compared to lowactivity along TFS. A lack of seismicity (both recent and historical) is observed in the southern sector of ATLFS where, however, geodetic data reveal significant deformation. Ourmultidisciplinary dataset including offshore observations suggests the southeastward continuation of the ATLFS into the Ionian Sea until joiningwith the faults cutting the Ionian accretionarywedge described in the recent literature. Our findings imply the existence of a highly segmented crustal shear zone extending from the Aeolian Islands to the Ionian Abyssal plain, that we believe plays the role of accommodating differential motion between the Southern Tyrrhenian unit and the western compressional domain of Sicily. The ATLFS, which is a main part of the inferred shear zone, behaves similarly to what often observed at the edges of retreating subduction346 81 - Some of the metrics are blocked by yourconsent settings
Item type:Publication, Access status: Open Access , Is the dependence on the temperature of the friction important in stress triggering phenomena? The case of the 2000 Iceland seismic sequence
(2012-04); ; ; ; Bizzarri, A.; Istituto Nazionale di Geofisica e Vulcanologia, Sezione Bologna, Bologna, ItaliaWe perform numerical experiments by using a mass–spring fault model subject to an external coseismic stress perturbation due to a remote seismic event happening on another fault, the causative fault. In particular, the aim of this study is to investigate the instantaneous fault interaction and possible triggering that happens when a fault perturbed by a stress change fails before the so–called unperturbed instability. As a realistic example we focus our attention on the instantaneous dynamic triggering phenomena occurred during the 17 June 2000 south Iceland seismic sequence in the South Iceland Seismic Zone (SISZ, Reykjanes Peninsula). The main event (Ms 6.6) was followed by three large events within a few tens of seconds (8, 26 and 30 s, respectively) located in a neighborhood of several tens of km. Among them the 26 s event was the best constrained (Bizzarri and Belardinelli, 2008). In the present study, conditions to simulate the instantaneous dynamic triggering connected to the former three events, have been investigated using the simple 1–D spring–slider analogue model representing a fault governed by the rate– and state–dependent friction laws. In previous studies suitable constitutive parameters of the modeled fault which allow the instantaneous triggering of the three events, have been found (Antonioli et al., 2006) and, furthermore, it was also shown how the dynamics of the 26 s event strongly depends on the assumed constitutive law and stress conditions (Bizzarri and Belardinelli, 2008) by considering the Dieterich–Ruina (DR henceforth) and the Ruina–Dieterich (RD henceforth) governing laws. In this context take place the present study original contribution that is to better understand if the conditions of instantaneous dynamic triggering (focusing on the case of the 26 s triggered event) provide any significant differences if modeled with a different rate– and state–dependent governing equation, the Chester and Higgs law (CH henceforth; see Chester and Higgs, 1992; Bizzarri, 2010b; Bizzarri, 2010c) which accounts for the thermal effect for frictional heating which may occur during seismic sliding.126 230 - Some of the metrics are blocked by yourconsent settings
Item type:Publication, Access status: Open Access , Time occurrence of earthquake instabilities in rate– and state–dependent friction models
(2011-05); ; ; ; Bizzarri, A.; Istituto Nazionale di Geofisica e Vulcanologia, Sezione Bologna, Bologna, ItaliaSince the latter half of last century many studies and laboratory experiments have focused on the understanding of the evolution of frictional strength during sliding events on active faults. Such events may occur through aseismic fault creep, high-velocity slip and, in some cases, as a combination of both. According to the concept that earthquakes are frictional instabilities, their time occurrence may show a periodical pattern (the seismic cycle) whose behavior can be referred to the stick-slip dynamic. The dynamic evolution of a fault is often modeled considering its formal analogy with a physical system known as the spring-slider model (namely, a damped harmonic oscillator). Many experimental studies have been conducted using the spring-slider model, most of them simulating the interaction between slip surfaces with the surrounding elastic medium with a single-degree-of-freedom system. Despite its obvious limitations, such a model has provided important insights on dynamics of stick-slip cycle [Gu et al., 1984; Carlson et al., 1994], nucleation of earthquakes and triggered earthquake phenomena [e.g. Belardinelli et al., 2003]. On the basis of several experimental results on rock friction, Dieterich (1979) and Ruina (1983) formulated rate- and state-dependent friction laws, in which the frictional resistance is expressed through the evolution of the sliding rate and its history. Afterwards, Chester and Higgs (1992) figured out that also the temperature variation, produced by frictional heating, can affect the duration of the seismic cycle and the evolution of the frictional strength as well and consequently they incorporate such a thermal effect, improving the previous Ruina’s constitutive law. The present study is aimed to: 1. investigate the spring-slider physical response depending on the adopted constitutive law; 2. show the influence that the constitutive laws can exert on the time occurrence of a seismic instability and on the seismic cycle duration; 3. compare the constitutive laws in order to show their different features in simulating the evolution of slip velocity, stress drop and seismic cycle.236 278 - Some of the metrics are blocked by yourconsent settings
Item type:Publication, Access status: Open Access , Time occurrence of earthquake instabilities in rate– and state–dependent friction models
(2011); ; ; ; Bizzarri, A.; Istituto Nazionale di Geofisica e Vulcanologia, Sezione Bologna, Bologna, Italia147 260 - Some of the metrics are blocked by yourconsent settings
Item type:Publication, Access status: Open Access , Magnetotelluric investigation in a seismogenic source area: Evidences from the 1930 Irpinia earthquake area
(2008-08); ; ; ; On 23 July 1930, the Irpinia region in southern Italy experienced a destructive (M 6.7) earthquake that struck the eastern sector of the southern Apennines moutain belt. Previous studies suggest that this earthquake was caused by a seismogenic source having oblique right-lateral kinematics and striking at an angle between the general trend of NE-verging large dip-slip faults in the southern Apennines (~ NW-SE) and the E-W near-vertical, strike-slip right lateral faults that have been recently discovered in the foreland, east of the main extensional axis. Also, the ~14 km hypocentral depth of the 1930 earthquake that has been calculated in previous studies is likely located within the basement below the Apula carbonate platform succession. This puts the source of the 1930 earthquake not only in an intermediate region between pure normal (NW-SE) and strike-slip right-lateral (E-W) large seismogenic faults in the southern Apennines, but also at an hypocentral depth between the 12-13 km depth of the earthquakes caused by normal faulting (like the Irpinia 23 Nov. 1980, M 6.9 one) and the 15-20 km depth of the earthquakes caused by strike-slip faulting in the foreland (like the 31 Oct.-1 Nov. 2002, M 5.8 Molise ones). In this framework, we performed a magnetotelluric (MT) study to investigate the evidence of preferential direction in resistivity anisotropy and to compare it with the strike of the 1930 seismogenic fault.305 1929 - Some of the metrics are blocked by yourconsent settings
Item type:Publication, Access status: Open Access , Shallow to intermediate resistivity features of the Colfiorito Fault System inferred by DC and MT survey
(2008-04); ; ; ; Diaferia, I.; Dipartimento di Geologia e di Geofisica, Università degli Studi di Bari, ItalyOver the last decade electromagnetic (EM) measurements have provided new constraints on the upper-crustal structure of the major fault zones in the world, both when they act as conduit and as a barrier, due to strong sensitivity of resistivity to fluids circulation and mineralization. On the track of a high impact magnetotelluric (MT) study performed across the San Andreas Fault, high resolution EM data were collected in the Colfiorito epicentral area along profiles crossing some main fault lineaments. Being the study focussed both on shallow that on intermediate resistivity distribution in the brittle upper-crust, a MT profile was integrated by several electrical resistivity tomographies (ERT). The latter were successful in locating faults even where the structures are buried by a wide covering of Quaternary deposits and in the recognition of different electrical signatures of the faults. MT resistivity model crossing Mt. Prefoglio normal fault clearly imaged the typical thrust structures of the area and a high conductive zone spatially related to the fault. Seismicity seems to be located outside such conductive area, whose behaviour suggests a fluidised and altered zone incapable of supporting significant stress internally.196 338 - Some of the metrics are blocked by yourconsent settings
Item type:Publication, Access status: Open Access , Studio dell'anisotropia elettrica nella zona della sorgente sismogenetica del terremoto dell’Irpinia del 1930
(2007-11); ; ; ; L’area del terremoto dell’Irpinia del 1930 corrisponde in profondità all'avampaese Apulo, inflesso al di sotto delle unità alloctone accavallate nella porzione frontale del cuneo orogenico, ma non coinvolto nelle strutture dei cosiddetti duplex dell'Apula sensu Patacca and Scandone (2004). In particolare, le profondità ipocentrali del terremoto del 1930 corrispondono al basamento sottostante la successione della Piattaforma Carbonatica Apula. Il campo macrosismico e i dati strumentali disponibili (si veda la sorgente in DISS, 2007, con relativa bibliografia, e Pino et al., sottomesso) suggeriscono una sorgente sismogenetica con un’orientazione e una cinematica che rappresentano una sorta di transizione tra la direzione W-E a cinematica trascorrente destra, che caratterizza la sismicità propria delle aree di avampaese sia affiorante che sepolto, e la direzione NW-SE a cinematica normale, che caratterizza la sismicità connessa all'estensione lungo l'asse della catena Appenninica (si veda il terremoto del 1980). In questo quadro, l’obiettivo dello studio magnetotellurico è stato quello di investigare i volumi di crosta al di sotto della successione Apula per valutare l'eventuale presenza di direzioni preferenziali dell'anisotropia di resistività che fossero confrontabili con la direzione della sorgente del terremoto del 1930. Il verificarsi di tale evenienza avrebbe potuto essere infatti interpretato come indizio di una zona di debolezza regionale, che avrebbe condizionato le caratteristiche geometriche e cinematiche della sorgente del terremoto stesso. Partendo dall’area sismogenetica segnalata nel DISS per questo terremoto, sono stati effettuati in un’area di circa 1000 km2 sondaggi magnetotellurici in 15 siti, nell’intervallo di 0.009- 4000 s. Per ciascun sito si è proceduto alla misura delle tre componenti ortogonali del campo magnetico e di tre componenti del campo elettrico, di cui due lungo la stessa linea e ortogonali alla terza. Ciò ha consentito la stima dei parametri magnetotellurici per due sondaggi adiacenti, al fine di meglio controllare possibili problemi di rumore antropico o strumentale. Le stazioni, fino ad un massimo di tre, hanno operato in contemporanea fungendo l’una per l’altra da remote reference (Gamble et al., 1979). Va sottolineata la buona qualità dei dati acquisiti sia in termini di stime stabili con diverse tecniche di analisi, che per basso scattering delle curve di resistività apparente e fase. Le risposte sperimentali sono state poi comparate con i dati di pozzo disponibili, verificando un ottimo accordo. È stata inoltre eseguita un’analisi sulle proprietà fisiche e geometriche del tensore impedenza, adottando lo schema di decomposizione di Weaver et al. (2000) dal quale è derivato poi lo studio degli invarianti magnetotellurici per la definizione della dimensionalità delle strutture elettriche investigate ai vari periodi (ovvero alle varie profondità). Circa il 75% dei dati analizzati implica strutture assimilabili necessariamente a modelli tridimensionali e le quattro componenti del tensore impedenza sono significativamente diverse da zero. Per questo tipo di strutture, seguendo Weaver et al. (2000), è comunque possibile definire una direzione di eterogeneità elettrica. Ciò è stato fatto per ciascun sondaggio e per ciascun periodo di stima. Mediante la trasformazione di Niblett–Bostick è stato poi ottenuto lo strike elettrico in funzione della profondità stimata. Viene riportata la direzione di strike per i vari sondaggi alla profondità stimata nell’intervallo 8 - 16 km, riferibile quindi a una porzione di crosta al di sotto del resistivo che identifica le successioni della Piattaforma Apula.277 121 - Some of the metrics are blocked by yourconsent settings
Item type:Publication, Access status: Open Access , Generation of synthetic wide-band electromagnetic time series
(2002); ; ; ;Loddo, M.; Dipartimento di Geologia e Geofisica, Università di Bari, ItalySchiavone, D.; Dipartimento di Geologia e Geofisica, Università di Bari, ItalyThe estimation of the earth transfer functions in MT prospecting method poses the greatest difficulty. As in the seismic prospecting method this task requires the development of advanced processing techniques. In order to assess the performance of each technique, controlled synthetic data and different noise types, which simulate the observed signals, are required. This paper presents a procedure to generate a wide-band noise-free electromagnetic field to be used both for magnetotelluric and audio-magnetotelluric studies. Furthermore, an effort was made to extend the simulation procedures to generally stratified and simple inhomogeneous earth structures. The discrete-time magnetic field values are generated through the inverse Fourier transform of a continuous amplitude spectrum and a sampling procedure. The electric field time series are obtained by the convolution of the magnetic field time series, calculated in the interested frequency band, with a non-causal impedance impulse response. Polarized fields, which are important when inhomogeneous media are considered, are also generated.173 230 - Some of the metrics are blocked by yourconsent settings
Item type:Publication, Access status: Open Access , Structural features of the Middle Tirso Valley (Central Sardinia - Italy) from geoelectrical and gravity data
(2001-08); ; ; ; The Middle Tirso Valley is located in Central Sardinia and lies between two structural highs, the Marghine-Goceano chain and the Barbagia Paleozoic horst. The geological structures of the area, potentially interesting for its geothermal resources, are rather complex and dominated by two regional faults – the Marghine fault and the Nuoro fault – which affect the Palaeozoic basement and the Tertiary volcano-sedimentary deposits. Combined modelling of gravity and geoelectrical data defines the shape and extent of this Tertiary basin. The Bouguer anomaly is mainly characterized by a three-dimensional gravity low which has been named «Bolotana-Sedilo gravity low», corresponding to a structure generated by collapses attributable to transcurrent and extensional tectonic events. The down faulted zone is filled with a Tertiary low density volcano-sedimentary sequence extending southwards and overlain by Pliocene-Quaternary basalts. Another regional structure named «Tirso Fault» is proposed167 657 - Some of the metrics are blocked by yourconsent settings
Item type:Publication, Access status: Open Access , Potential field continuation: a comparative analysis of three different types of software
(1998-08); ; ;Ciminale, M.; Dipartimento di Geologia e Geofisica, Universitá di Bari, Italy ;Loddo, M.; Dipartimento di Geologia e Geofisica, Universitá di Bari, ItalyDARING.F is a new Fortran77 computer program which has been developed to perform the continuation of potential field data between arbitrary surfaces. The implemented equivalent source algorithm inverts a system of linear equations by using sparse matrix. A comparative analysis between the performance of this software and that of two computer programs (named UPWARD.F and UPNEW.F) previously written by the same authors is carried out. As a result of this analysis, some useful and important suggestions on how to obtain the highest level of accuracy of transformed data in various situations (i.e. large matrices of data, close surfaces) are given.167 229
