Carrozzo, M. T.
Preferred name
Carrozzo, M. T.
The search returned 4 results
Now showing 1 - 4 of 4
- Some of the metrics are blocked by yourconsent settings
Item type:Publication, Access status: Open Access , Integrated geophysical and geological investigations applied to sedimentary rock mass characterization
(2008-02); ; ; ; The Salento Peninsula (south-eastern Italy) is characterized by sedimentary rocks. The carbonatic nature of the rocks means they are affected by karst phenomena, forming such features as sinkholes, collapsed dolines and caverns, as a result of chemical leaching of carbonates by percolating water. The instability of these phenomena often produces land subsidence problems. The importance of these events is increasing due to growing urbanization, numerous quarries affecting both the subsoil and the surface, and an important coastline characterized by cliffs. This paper focuses on geological and geophysical methods for the characterization of soft sedimentary rock, and presents the results of a study carried out in an urban area of Salento. Taking the Q system derived by Barton (2002) as the starting point for the rock mass classification, a new approach and a modification of the Barton method are proposed. The new equation proposed for the classification of sedimentary rock mass (Qsrm) takes account of the permeability of the rock masses, the geometry of the exposed rock face and their types (for example, quarry face, coastal cliff or cavity), the nature of the lithotypes that constitute the exposed sequence, and their structure and texture. This study revises the correlation between Vp and Q derived by Barton (2002), deriving a new empirical equation correlating P-wave velocities and Qsrm values in soft sedimentary rock. We also present a case history in which stratigraphical surveys, Electrical Resistivity Tomography (ERT), and seismic surveys were applied to in situ investigations of subsidence phenomena in an urban area to estimate rock mass quality. Our work shows that in the analysis of ground safety it is important to establish the rock mass quality of the subsurface structures; geophysical exploration can thus play a key role in the assessment of subsidence risk.279 1187 - Some of the metrics are blocked by yourconsent settings
Item type:Publication, Access status: Open Access , Ground Penetrating Radar (GPR): an application for evaluating the state of maintenance of the building coating
(2003); ; ; ;Leucci, G.; Osservatorio di Chimica, Fisica e Geologia Ambientali, Dipartimento di Scienza dei Materiali, Università di Lecce, ItalyNegri, S.; Osservatorio di Chimica, Fisica e Geologia Ambientali, Dipartimento di Scienza dei Materiali, Università di Lecce, ItalyGround Penetrating Radar (GPR) is a non-destructive methodology. For the localisation of buried structures, it uses short time duration electromagnetic (EM) pulses lasting from about 1 ns to about 30 ns. Therefore, GPR is characterised by a wide frequency band ranging from 10 MHz to some GHz, and is useful in the localisation of EM discontinuities in the subsurface with high resolution. This paper describes an application of GPR to evaluate the state of maintenance of some travertine panels attached to the inside walls of a building housing the Bank of Naples in Campobasso and in danger of falling because of the numerous voids present between the wall and the panels. The aim of the survey was to assess whether the GPR technique could be used to detect the voids behind the travertine panels. The study was made to assist the design of the restoration works of the travertine covering. Because of the very narrow thickness of both the travertine plates and the voids, special care was needed in the acquisition and processing steps. The measurements were performed on two panels: one purposely put on to the laboratory wall with a known position of the voids; the other one selected from among the panels to be restored. Although pushed to the limit of the resolution achievable by the available antenna, the study has given quite good results.306 1845 - Some of the metrics are blocked by yourconsent settings
Item type:Publication, Access status: Open Access , Application of 3D visualization techniques in the analysis of GPR data for archaeology
(2002); ; ; ; In this work, some results of a GPR survey carried out in a 10000 m2 large archaeological site, located in Lecce (Italy) near to a necropolis dating from the Messapian to the Roman imperial age, are reported. After a preliminary survey, performed on the entire area along parallel 1 m spaced profiles using a 200 MHz and a 500 MHz antenna in single-fold continuous mode, some smaller areas were selected, where the survey was repeated decreasing the profile spacing down to 0.50 m for the lower frequency antenna and to 0.25 m for the higher one. For two selected zones (D and B) the processed data were visualized in 3D space not only by the standard time slice technique, but also by two recently proposed approaches, namely by iso-amplitude surfaces of the complex trace amplitude and by 3D projection of energy and envelope stacks. The immediacy in revealing the spatial positioning of highly reflecting bodies, such as the anomaly interpreted as an old refilled cistern in zone D, makes 3D visualization techniques very attractive in archaeological applications of GPR. Their sensitivity to the signal/noise ratio is, on the other hand, highlighted by the quite poor performance in zone B, where the only reliable result provided by all the techniques was the soil/bedrock reflection, whereas none of them could effectively enhance the visibility of weak dipping reflections noted on 2D sections and probably related to fractures or bedding planes in the calcarenitic basement. The performance of the various techniques in these two different situations allowed insights into their main advantages and drawbacks to be gained.993 950 - Some of the metrics are blocked by yourconsent settings
Item type:Publication, Access status: Open Access , Gravity modelling of the lower crust in Sardinia (Italy)
(1997-10); ; ; ; In this paper an example is given of an application of statistical techniques to the Bouguer anomalies analysis in order to design a simple crustal model using few a priori assumptions. All gravity measurements carried out in Sardinia have been collected and processed. The Bouguer anomalies have been calculated according to local density estimates. Spectral analysis of the Bouguer anomalies has been carried out along selected profiles in order to estimate the mean depth of the Moho discontinuity and that of an infracrustal discontinuity. The use of this technique inferred the presence of a discontinuity at a mean depth of ~ 28 km, interpreted as Moho and the likely presence of an infracrustal discontinuity at a mean depth of ~18 km, interpreted as the upper-lower crust transition. In order to roughly reconstruct the shape of these interfaces, 2D inversion techniques were applied to the large wavelength components of the Bouguer anomalies, relative to profiles oriented along the E-W direction, extracted from low-pass filtered Bouguer anomaly maps. The density model obtained is compatible with some velocity models achieved from the interpretation of the seismic refraction profiles carried out within the European Geotraverse project.152 233
