Skip to main content
The search returned 14 results
Now showing 1 - 10 of 14
  • Some of the metrics are blocked by your 
    Item type:Publication, Access status: Open Access ,

    Geological Evidence of Paleotsunamis at Torre degli Inglesi (northeast Sicily)

    Two layers of fine sand of marine origin occur in a sequence of organic rich colluvia in an archaeological excavation at Torre degli Inglesi, on Capo Peloro, northeast Sicily. Stratigraphic and micropaleontologic analyses support the hypothesis that these layers are related to deposition due to paleotsunami waves. Their ages are constrained both with radiocarbon and archaeological datings. The age of the oldest layer is coincident with the 17 A.D. earthquake that hit Reggio Calabria but for which no tsunami was previously reported. The age of the youngest layer can be only constrained in the range 3rd– 19th century and is tentatively associated to the 6 Feb. 1783 event.
      208  495
  • Some of the metrics are blocked by your 
    Item type:Publication, Access status: Restricted ,

    Crustal seismic velocity in the Marche region (Central Italy): computation of a minimum 1-D model with seismic station corrections.

    (2009) ; ; ; ;
    Scarfì, L.; Istituto Nazionale di Geofisica e Vulcanologia, Sezione Catania, Catania, Italia
    A 1-D velocity model for the Marche region (central Italy) was computed by inverting P- and S-wave arrival times of local earthquakes. A total of 160 seismic events with a minimum of ten observations, a travel time residual ≤ 0.8 s and an azimuthal gap lower than 180° have been selected. This “minimum 1-D velocity model” is complemented by station corrections, which can be used to take into account possible near-surface velocity heterogeneities beneath each station. Using this new P-wave velocity model and the program HYPOELLIPSE (Lahr, 1999), the selected local events were relocated. Earthquake locations in this study are of higher quality with respect to the original ones. The obtained minimum 1-D velocity model can be used to improve the routine earthquakes locations and represents a further step towards more detailed seismotectonic studies of the area.
      247  31
  • Some of the metrics are blocked by your 
    Item type:Publication, Access status: Open Access ,

    The shallow magma pathway geometry at Mt. Etna volcano

    A fundamental goal of volcano seismology is to understand the dynamics of active magmatic systems in order to assess eruptive behavior and the associated hazard. Imaging of magma conduits, quantification of magma transport and investigation of long-period seismic sources, together with their temporal variations, are crucial for the comprehension of eruption-triggering mechanisms. At Mt. Etna volcano, several intense episodes of tremor activity were recorded during 2007, in association with strombolian activity and/or intense fire fountaining episodes occurring from the South East Crater (SEC). The locations of the tremor sources and of the long-period seismic events are used here to constrain both the area and the depth range of magma degassing, highlighting the geometry of the shallow conduits feeding SEC. The imaged conduits consist of two connected resonating dike-like bodies, NNW-SSE and NW-SE oriented, extending from sea level to the surface. In addition, we show how tremor, long-period (LP) and very-long-period (VLP) event locations and signatures reflect pressure fluctuations in the plumbing system associated with the ascent/discharge of gas-rich magma linked to the lava fountains. The evidence here reported, also corroborated by ground deformation variations, can help develop a better prediction and early-warning system for those eruptions (effusive or explosive) that apparently manifest no clear precursors.
      189  609
  • Some of the metrics are blocked by your 
    Item type:Publication, Access status: Restricted ,

    Radiation measurements as tool for environmental and geophysics studies on volcano-tectonic areas

    In the last years there has been an increasing concern about natural- radioactivity measurements both from the point of view of the environmental survey, especially for the human health protection, and of the geophysical-events investiga- tion in volcanic areas and tectonic fault zones. We report on our activity in both these fields, in particular on the measurements of indoor radon concentration in a long-term passive monitoring in dwellings of the eastern region of Sicily. Because this region is characterized by high seismicity, besides the indoor radioactivity sur- vey, in-soil radon measurements in the region (both volcanic and tectonic area) can provide a better insight and a valuable database for the study related to radon anomalies. A synthesis is reported of the results that we obtained, in the last years, in the volcanic and tectonic area of oriental Sicily both from indoor monitoring and from geophysical-events investigation.
      393  74
  • Some of the metrics are blocked by your 
    Item type:Publication, Access status: Restricted ,

    Tracking eruptive phenomena by infrasound: May 13, 2008 eruption at Mt. Etna

    Active volcanoes produce inaudible infrasound due to the coupling between surface magmatic processes and the atmosphere. Monitoring techniques based on infrasound measurements have been proved capable of producing information during volcanic crises. We report observations collected from an infrasound network on Mt. Etna which enabled us to detect and locate a new summit eruption on May 13, 2008 when poor weather inhibited direct observations. Three families of signals were identified that allowed the evolution of the eruption to be accurately tracked in real-time. Each family is representative of a different active vent, producing different waveforms due to their varying geometry. Several competitive models have been developed to explain the source mechanisms of the infrasonic events, but according to our studies we demonstrate that two source models coexist at Mt. Etna during the investigated period. Such a monitoring system represents a breakthrough in the ability to monitor and understand volcanic phenomena.
      183  22
  • Some of the metrics are blocked by your 
    Item type:Publication, Access status: Restricted ,

    The L’Aquila 2009 earthquake: an application of the European Macroseismic Scale to the damage survey in the epicentral area

    On April 6, 2009 a Mw 6.3 earthquake heavily damaged the city of L'Aquila, its suburbs and several localities along the Aterno valley. The extent of the damage was the result of several factors, among which the high vulnerability of the ancient buildings but in some cases also of the modern ones, the structure of the urban centres and the site effects deriving from local critical geological conditions. We present the results of the macroseismic investigation carried out in the epicentral area by using the European Macroseismic Scale (EMS), a more suitable scale than the Mercalli-Cancani-Sieberg (MCS) one in evaluating rather complex damage scenarios. The maximum intensity has been estimated for Onna (IX EMS), the historical centre of L’Aquila, and for Castelnuovo, Pettino and S. Elia (VIII-IX EMS). On the whole, some 30 localities within an area that extends for 35 km in a NW-SE direction suffered significant damage (VII-VIII EMS). Finally, we discuss the differences in the intensity assessment deriving from the interpretation of the MCS and EMS scales.
      470  39
  • Some of the metrics are blocked by your 
    Item type:Publication, Access status: Restricted ,

    Magma, faults, and gravitational loading at Mount Etna: The 2002–2003 eruptive period

    (2011-05-13) ; ; ; ;
    Aloisi, M.; Istituto Nazionale di Geofisica e Vulcanologia, Sezione Catania, Catania, Italia
    Mount Etna is characterized by a complex structural setting that influences its evolution. In order to understand how the interaction between dike-forming intrusions and faulting influences the kinematics of the volcanic edifice, we developed a numerical model. It takes account of the topography, the medium heterogeneities, the gravitational loading, and the most active crustal discontinuities. A parameterization of the apparent coefficient of friction, as a function of the depth, has been considered in the range from 0.01 to 0.5. The density values used, Young’s modulus, and Poisson’s ratio range from about 1700 to 3200 kg/m3, 8.5 to 140 GPa, and 0.15 to 0.35, respectively. The model was applied to the 2002–2003 Etna eruption. The resulting deformation pattern was in agreement with the data provided by the continuous GPS stations and the seismological knowledge, obtaining displacements up to 1 m. Some discrepancies between the recorded ground deformation field and the modeled displacements allowed us to make some hypotheses on the volcano-tectonic (e.g., for the Pernicana fault) or regional-tectonic origin (Acireale – S. Alfio fault system) of the crustal discontinuities. Moreover, our results suggested that the Pernicana fault is characterized by a very low apparent coefficient of friction, less than 0.1. Furthermore, we evaluated the contribution of the gravitational loading and found that it implies a variation of about 10% of the overall deformation pattern. Our results clearly showed that the weight of the volcanic edifice acts in opposition to the magmatic intrusions. Conversely, we found that the presence of medium heterogeneities may favor the eastern flank movements toward the SE and the spreading of the summit area, playing a fundamental role in ascending magma. Finally, we investigated the shallow sliding model and found that dike-forming intrusions produce negligible displacements, less than 1 mm, along the subhorizontal detachment surface. Therefore, the gravitational loading during dike-forming intrusions is not able to trigger sliding processes along this plane.
      202  35
  • Some of the metrics are blocked by your 
    Item type:Publication, Access status: Open Access ,

    Identification of tsunami deposits in south-eastern Sicily: evidence for the 365 A.D. Crete earthquake?

    In the past decade, the methodologies and techniques of paleoseismological studies have evolved towards a multidisciplinary approach for the characterization of past earthquakes. Along with traditional geologic and geomorphologic near-fault investigations, off-fault studies of evidence for past earthquakes, such as soft sediment deformation (e.g. Moretti, 2000; Marco and Agnon, 2005), evidence of liquefaction (e.g. Tuttle et al., 2002; Guarnieri et al., 2009) and tsunami deposits (Dawson and Stewart, 2007; Pantosti et al., 2008; De Martini et al., 2009) are considered useful tools in the assessment of paleoearthquakes ages, magnitudes, and earthquake recurrence rates. We present the preliminary results of off-fault paleoseismological studies carried out in south-eastern Sicily, focused to identify evidence of tsunami inundations.
      192  547
  • Some of the metrics are blocked by your 
    Item type:Publication, Access status: Restricted ,

    Paleoseismic investigations of historical liquefactions along the Ionian coast of Sicily

    Eastern Sicily is an area where some of the most catastrophic earthquakes in Italian history occurred. As reported by historical sources, these earthquakes induced liquefaction phenomena. In two areas along the Ionian coast of Sicily we found liquefaction evidence in Holocene deposits. In the Minissale site (east of Mount Etna), the observed liquefaction features can be related to the 1169 and 1693 earthquakes, while in the Agnone site (south of Catania), the deformational structures can be tentatively associated to the 1542 and 1693 events. Both sites locate in areas where historical liquefaction has been observed in the past, thus confirming the actual liquefaction susceptibility/ potential in this region. The evidence of repeated liquefaction events at the same site, highlights the relevance of the paleoseismic approach for modeling the recurrence time and preparing scenarios of seismic effects in eastern Sicily, where seismogenic sources are scantly defined.
      205  29
  • Some of the metrics are blocked by your 
    Item type:Publication, Access status: Open Access ,

    The L’Aquila 2009 earthquake: an application of the European Macroseismic Scale to the damage survey

    (2009-11) ;
    Azzaro, R.
    ;
    ; ;
    In April 2009 the Abruzzo region in Central Italy was hit by a strong earthquake (Ml 5.8, Mw 6.3) with epicentre near the town of L’Aquila. In the following days some members of the QUEST team, the expert working group for macroseismic surveys, began a detailed inspection of the most damaged areas with the aim to apply the European Macroseismic Scale (EMS, Grünthal, 1998) for estimating the intensities. A field form, tested during many other campaigns, was used as a common base for collecting data (Fig. 1). Fig. 1 – Field form used during survey with percentage of damage observed in Onna. At the end of the survey, that lasted for two months, about 100 localities were visited. In the investigation, attention has been devoted to establish building typology, grade of damage and percentage of damaged buildings, that is all the basic information for evaluating diagnostics of the EMS. A preliminary analysis of collected data has shown that the application of the EMS allows to better discriminate the effects mainly for higher intensity values. On the other hand, for intensity representing the damage threshold, the MCS scale tends to saturate, skipping from grade V to VI. One of the reasons is that EMS takes into account the building vulnerability, so that damage effects can be partitioned into different classes. The examples of Onna, Coppito and L’Aquila are hereinafter briefly discussed, and EMS intensities compared with estimations obtained by using MCS scales. Onna was almost completely destroyed (Fig. 1). The MCS scale reports at grade IX, destruction and heavy damage in about half of buildings, while at grade X the destruction of about ¾ of the buildings. The intensity evaluated by Galli and Camassi (2009) is IX-X MCS. In the EMS perspective, Onna is a village with 477 buildings, of which ca. 300 have vulnerability class A, 150 class B and 30 are C/D types (Fig. 2). Fig. 2 – Onna, different building vulnerability classes: a) type A; b) type C; c) type D building. The type A house is destroyed, the type C is slight damaged, the type D is undamaged. The collected data do not match all the diagnostics expected for a given degree (Fig. 1). In the field we observed 20% of buildings with vulnerability class B suffering damage of grade 5 while buildings with vulnerability classes C and D are scarcely involved (10%), that is they suffer less damage than expected at intensity IX. However, the overall percentage of damage fits the best with intensity IX, discarding the occasional extreme cases. At Coppito the MCS intensity is VI-VII (Galli and Camassi, 2009) since damage was moderate and not diffuse. By using the EMS approach, we observed two buildings with vulnerability class A suffering damage of grade 4 (some collapse of roofs), and many buildings with damage of grade 3. Buildings with vulnerability class B had damage of grade 2, a few of grade 3 (partial collapse of chimneys and fall of tiles). A building of type C with a big antenna onto the roof, suffered the partial collapse (Fig. 3). Few buildings with vulnerability class C or D showed damage of 2 grade. The overall observed effects are consistent with intensity VII EMS. The case of L’Aquila is quite complex to analyse. The town has been ‘divided’ in different but homogeneous sectors for two reasons: i) different geotechnical conditions in contiguous quarters and ii) different building typologies occurring in the historical centre - mainly ancient buildings of vulnerability class A and B - with respect to the new districts (edifices with prevailingly vulnerability classes C and D). Fig. 3. Coppito. Different damage in buildings of vulnerability class C. As a consequence, the level of damage was quite different throughout the town. In the NW sector of the city, the new quarters of Cansantessa and Pettino (Fig. 4), the buildings of vulnerability class C and D suffered damage of grade 2 and 3. Just one among the few buildings of class A - it is located along the main street - the roof collapsed. Estimated EMS intensity is VII-VIII. Fig. 4. a) Cansantessa and b) Pettino. Different damage of grade 3 in buildings of vulnerability class C and D. In the southeastern suburbs of L’Aquila, Torretta and Gignano suffered less damage on the whole (Fig. 5). Few buildings of vulnerability class C and D suffered damage of grade 2. Few buildings of vulnerability class B suffered damage of grade 3. Estimated EMS intensity is VII. Regarding the historical centre of l’Aquila, many buildings of vulnerability class A suffered damage of grade 4, some damage of grade 5. Many buildings of vulnerability class B suffered damage of grade 3, few damage of grade 4. Fig. 5. a) Gignano; b) Torretta. Different damage of grade 2 in buildings of vulnerability class C and D and damage of grade 3 in one building of type B. The very few constructions of classes C and D were slightly damaged. We observed only a few partial collapses in the Casa dello studente, in other two C buildings located near it and in buildings in via Campo di Fossa. We estimated the intensity VIII-IX EMS, because much of the observed damage is of intensity VIII but some diagnostics are of intensity IX. The lack of buildings with classes C and D does not allow to discriminate. This preliminary evaluation for L’Aquila downtown, has been confirmed after the detailed analysis performed by Tertulliani et al. (2009). Acknowledgements. We are grateful to the other QUEST members who contributed with useful information.
      213  217