Skip to main content
The search returned 26 results
Now showing 1 - 10 of 26
  • Some of the metrics are blocked by your 
    Item type:Publication, Access status: Open Access ,

    Engineering Geological and Geophysical Studies Supporting Finite Element Analysis of Historical Buildings after Dynamic Identification

    Resonance frequencies of a masonry bell tower were estimated by means of ambient noise measurements and compared with those computed by using fixed base, Winkler, and FE numerical, including subsoil. Given the geological complexity that characterizes the subsurface of the analyzed area, despite the presence of massive volcanic outcrops near the bell tower, we carried out a geophysical characterization of the subsoil by using active and passive seismic surveys. These surveys have identified a soft substrate underneath the construction; for this reason, the dynamic identification of the tower was performed, including the interaction with the soil. The resonance frequencies of the masonry bell tower computed by the models are very similar to those obtained using ambient noise. Results suggest that building resonance frequencies, estimated by ambient noise surveys, can be used because of their reliability especially when quick analyses are required at historical buildings located in seismically active areas needing plan actions to reduce their vulnerability. Moreover, such analyses, being performed on samplings acquired within the structure, allow for estimating its dynamic response, taking into account the effect of subsurface characteristics as well.
      65  86
  • Some of the metrics are blocked by your 
    Item type:Publication, Access status: Open Access ,

    Characterization of an Active Fault through a Multiparametric Investigation: The Trecastagni Fault and Its Relationship with the Dynamics of Mt. Etna Volcano (Sicily, Italy)

    The Trecastagni Fault (TF) is an important tectonic structure in the middle‐lower southern flank of Mt. Etna volcano. It is characterised by evident morphological slopes with normal dip‐slip ruptures that directly affect roads and buildings. The TF plays a key role in the complex framework of the volcano dynamics since it represents part of the southern boundary of the unstable sector. Seismic surveys have been performed on three different areas of the fault to gain insights into the seismic stratigraphic structure of the subsoil. We considered the seismic activity of a sector of the territory affecting the surface evidence of the Trecastagni Fault in the period between 1980 and 2021 in order to highlight the main seismic release and define the space–time distribution of seismicity. Most of the seismicity is located in the north‐western portion, while the central and southern sectors are characterised by low seismic activity. The strongest earthquakes occur mainly within the first 5 km of depth in the form of swarms and/or isolated shocks. Ground deformation techniques (levelling, In‐SAR and two continuous extensometers) evidence a continuous aseismic slip of the TF that is interrupted by short accelerations accompanied by shallow seismicity. The Trecastagni Fault dynamics are strictly linked to magma pressurisation and intrusive episodes of Mt. Etna that induce additional stress and promote its slip along the fault plane. Multidisciplinary data analysed in this work, evidenced the dual behaviour of the fault, from aseismic creep to stick‐slip, and the relation with magmatic activity, also suggesting the time delay in the response of the fault after the intense stress induced by dyke intrusion.
      412  106
  • Some of the metrics are blocked by your 
    Item type:Publication, Access status: Restricted ,

    Extensive surface geophysical prospecting for seismic microzonation

    This paper presents an overview of the geophysical activities for the seismic microzonation of 138 municipalities belonging to four Italian regions (Abruzzo, Lazio, Marche and Umbria) that were severely damaged by the seismic sequence of Central Italy (August 2016–January 2017). This study is the result of a collaborative effort between research Institutions and professional geologists with the support of local Administrations and the Italian Civil Protection Department and sets an unprecedented large-scale example of geophysical investigations supporting detailed seismic microzonation studies. This manuscript presents the methodological approach adopted for the geophysical activities, including the technical protocols and procedures, the best practices, the final products and the results supporting a detailed microzonation study of III level. The first step of the study was the collection and critical review of all available geophysical and geological information for planning the new geophysical surveys (specifically their type and location), in order to assess the subsoil geometry and the seismic characterization of the areas under investigation. Integration with the newly acquired geophysical data allowed the identification of zones with homogeneous local seismic hazard as well as the reference seismo-stratigraphy for each area, defining for each geological unit the ranges of the relevant properties in seismic amplification studies: layering and thicknesses, density, P-wave and S-wave seismic velocity. We also present a few representative case studies illustrating the geophysical investigation for different geomorphological situations. These examples, together with the findings of the entire project, are discussed to point out the strength points and the criticalities, as well as the necessary requirements in the application of geophysical methods to detailed microzonation studies.
      198  4
  • Some of the metrics are blocked by your 
    Item type:Publication, Access status: Restricted ,

    The unstable eastern flank of Mt. Etna volcano (Italy): First results of a GNSS-based network at its southeastern edge

    Two small geodetic subnetworks were established in 2010 and in 2014, respectively, along the southeastern edge of the unstable eastern flank of Mt. Etna volcano. These networks have been monitored since late 2014 with GNSS techniques by the GEOmatic_laboratory of Earth Science Section of the University of Catania. The resulting horizontal velocity field allowed us to observe a westward decay of the rate and a different azimuthal pattern of motion between the two networks. We suggest that both features are due to active deformation of the Nizzeti faults. We also observed that the deforming region is not entirely confined by the Tremestieri-San Gregorio-Acitrezza fault zones, but it extends southwards. Areal upgrades of the networks as well as the scheduling of measurements at least on a monthly basis will improve our knowledge of the current deformation pattern of the investigated area.
      323  6
  • Some of the metrics are blocked by your 
    Item type:Publication, Access status: Restricted ,

    Modelling the long-term deformation of the sedimentary substrate of Mt. Etna volcano (Italy)

    (2015) ; ; ; ;
    Scudero, S.; Università Catania
    This study investigates in detail the deformation events that have affected the sedimentary successions forming the substrate of Mt. Etna volcano (Italy). Based on the geometric reconstruction of a buried sedimentary marker, we have been able to identify and quantify the effects of three different mechanisms of deformation that have affected the area in the last 600 ka. Numerical results from Finite Element Method (FEM) applied to model viscoelastic deformation suggest the occurrence of a crustal doming process originating at the mantle-crust transition (~16 km). We propose that the source of deformation is related to the diapiric uprise of hydrothermal material originating in altered ocean-like crust and its emplacement at a shallower level in the crust. This process has great relevance in the volcanic system and should be considered for the full assessment of its origin and evolution.
      280  30
  • Some of the metrics are blocked by your 
    Item type:Publication, Access status: Restricted ,

    Borehole seismic surveys for the mechanical characterization of a calcarenite cliff in the area of Ispica (southern Sicily)

    (2015) ; ; ; ;
    Imposa, S.
    In this study, we investigate the mechanical properties of the substrate underlying the historical Franciscan Friars Minor convent of Ispica (southern Sicily). The convent, where new fractures recently occurred, is located on top of a calcarenite cliff formed along one of the planes of the regional Pozzallo-Ispica-Rosolini normal fault system. Taking advantage of three existing mechanical drillings 30 m deep, we have carried out down-hole tests (DHT) and a seismic tomography survey in up-hole configuration. The down-hole tests provided vertical profiles of P- and S-wave velocity measured at 1-m depth intervals, from which we have derived the basic elasto-dynamic and seismic parameters, while the tomography survey imaged vertical sections of P-wave velocity across the cliff. The results highlight variable mechanical properties of the subsoil and a step-like pattern of velocity variations parallel to the cliff face that could suggest the occurrence of secondary ruptures related to the main Ispica fault.
      303  25
  • Some of the metrics are blocked by your 
    Item type:Publication, Access status: Open Access ,

    Geological, seismological and geodetic evidence of active thrustingand folding south of Mt. Etna (eastern Sicily): Revaluation of “seismicefficiency” of the Sicilian Basal Thrust

    tGeological studies and morphological analysis, compared with seismological and geodetic data, suggestthat a compressive regime currently occurs at crustal depth in the western sector of Mt. Etna, accommo-dated by shallow thrusting and folding at the front of the chain, south of the volcanic edifice. In particular,a large WSW-ENE trending anticline, interpreted as detachment fold, is growing west and north of Cata-nia city (the Catania anticline). Geological data suggest that during the last 6000 years the frontal foldhas been characterized by uplift rates of ∼6 mm/yr along the hinge, consistent with the interferometricdata (10 mm/yr) recorded in the last 20 years. Moreover, a NNW-SSE oriented axis of compression hasbeen obtained by seismological data, consistent with GPS measurements over the last 20 years whichhave revealed a shortening rate of ∼5 mm/yr along the same direction. Besides the activity related to thevolcanic feeding system, the seismic pattern under the Mt. Etna edifice can be certainly related to theregional tectonics. The compressive stress is converted into elastic accumulation and then in earthquakesalong the ramps beneath the chain, whereas on the frontal area it is accommodated by aseismic defor-mation along an incipient detachment within the clayish foredeep deposits. The high rate of shorteningat the aseismic front of the chain, suggests a greater “seismic efficiency” in correspondence of ramps atthe rear.
      1010  145
  • Some of the metrics are blocked by your 
    Item type:Publication, Access status: Restricted ,

    New evidence for Late Quaternary deformation of the substratum of Mt. Etna volcano (Sicily, Italy): clues indicate active crustal doming

    (2014-04-05) ; ; ; ;
    De Guidi, G.; Università degli studi di Catania
    Stratigraphic and morphostructural analyses have been carried out in the Mt. Etna volcanic region (eastern Sicily) to investigate in detail the deformation events that have affected the sedimentary successions forming the substratum of the volcano. In the foredeep, Quaternary submarine sedimentation ended 600 ka ago when the whole area emerged in response to homogeneous regional uplift. The irregular distribution of a stratigraphic marker, recognized through the analysis of more than 250 borehole logs, suggests that local dynamics also affected the area. We identify both compressional tectonic dynamics and volcano-related tectonic activity, and discriminate among their associated deformations. In particular, we quantify the vertical deformation component of the compressional structures (thrusts and related folds) and recognize for the first time a vertical component of deformation whose pattern clearly indicates a doming process acting at Mt. Etna. The comparison between long-term and short-term rates suggests that the doming has acted consistently over space and time through the last 600 ka and provides clues to the source of uplift. This component, defined by a specific Quaternary sedimentary horizon, has been compared with vertical deformation obtained by analytical inversion of morphological substratum data, and localizes the source at a depth of ∼16 km, at the mantle-crust transition. This uplift may be the consequence of hydration occurring in the altered ocean-like crust.
      284  54
  • Some of the metrics are blocked by your 
    Item type:Publication, Access status: Open Access ,

    Characterization of decay in the wooden roof of the S. Agata church of Ragusa Ibla (southeastern Sicily) by means of sonic tomography and Resistograph® penetration tests

    We describe the results of a sonic tomography survey and penetration tests carried out inside the S. Agata church of Ragusa Ibla, in southeastern Sicily (Italy). The purpose of this work was to evaluate the extent of decay in some of the ancient wooden trusses of the nave's roof, in view of possible strengthening interventions. Sonic tomography is entirely non-invasive and is suitable to investigate large portions of a structure, although in a qualitative way, while penetration tests are little invasive, point measurements that enable high-resolution detection of wood decay and cracks. We combined the two techniques to investigate the internal condition of 4 trusses that looked most deteriorated at a preliminary visual inspection. Results showed that decays occur mainly next to the walls, due to rainwater infiltration, and on the side of the timbers facing the rear of the nave; in general, chords have worse mechanical properties than rafters.
      328  349
  • Some of the metrics are blocked by your 
    Item type:Publication, Access status: Open Access ,

    Seismicity and Crustal Velocity Structure of the Southern Central Andes - Western Argentina

    A local seismic network, operating in western Argentina from 28°S to 33 °S, between August 1995 and January 1999, recorded more than 450 earthquakes. In this region, the geodynamic is controlled by the subduction of the Nazca plate beneath the South American lithosphere, which is characterised here by a sub-horizontal path before reassuming its downward descent. As accurate earthquake locations are of primary importance when studying the seismicity of a given area, events recorded by the local seismic network enable in-depth investigations into seismotectonic patterns, allowing us to improve the earthquake source characterization and the knowledge on the ongoing seismo-tectonics of the region. With this aim, we performed a simultaneous inversion of both the velocity structure and the hypocentre location. The obtained velocity images highlight vertical and lateral heterogeneities which, together with the distribution of the relocated events, can be associated with the main tectonic structures in the crust of the western Sierra Pampeanas region. The study also provided new constraints on the geometry of the subducted slab. We noted a great concentration of shallower seismicity with respect to that of the surrounding areas at the expected position of the Juan Fernandez Ridge, which certainly influences the subduction style along its strike, leading to the formation of a bent in the slab geometry.
      186  259