Tapetado, Alberto
Preferred name
Tapetado, Alberto
Official Name
A. Tapetado
Alternative Name
Tapetado Moraleda
A. Tapetado
Alberto Tapetado Moraleda
Moraleda, A.T.
Alberto T. Moraleda
ORCID
The search returned 3 results
Now showing 1 - 3 of 3
- Some of the metrics are blocked by yourconsent settings
Item type:Publication, Access status: Open Access , Mechanical Energy Dissipation During Seismic Dynamic Weakening in Calcite-Bearing Faults
(2024-09-09); ; ; ;Barrero Echevarria, XabierEarthquakes are frictional instabilities caused by the shear stress decrease, that is, dynamic weakening, of faults with slip and slip rate. During dynamic weakening, shear stress depends on slip, slip rate, and temperature, according to constitutive laws governing the earthquake rupture process. In the laboratory, technical limitations in measuring temperature during frictional instabilities inhibit the investigation and interpretation of shear stress evolution. Here we conduct high velocity friction experiments on calcite-bearing simulated faults, both on bare-rock and on gouge samples, at 20-30 MPa normal stress, 1-6 m/s slip rate and 1-20 m total slip. Seismic slip pulses are reproduced by imposing boxcar and regularized Yoffe slip rate functions. We measured, together with shear stress, slip, and slip rate, the temperature evolution on the fault by employing an innovative two-color fiber optic pyrometer. The comparison between modeled and measured temperature reveals that for calcite-bearing faults the heat sink caused by decarbonation reaction controls the temperature evolution. In bare-rocks, energy is dissipated as frictional heat, and temperature increase is buffered by the heat sink of the calcite decarbonation reaction. In gouges, energy is dissipated as frictional heat and for plastic deformation processes, balanced by the heat sink caused by the decarbonation reaction enhanced by the mechanochemical effect. Our results suggest that in calcite-bearing rocks, a common fault zone material for earthquake sources in the continental crust at shallow depth, the type of fault materials (bare-rocks vs. gouges) controls the energy dissipation during seismic slip. Plain Language Summary During earthquakes, faults rocks lose strength, and therefore the ability to sustain shear stress as a consequence of slip, slip rate, and temperature resulting in dynamic weakening. The mathematical relationships between the decreasing strength and slip, slip rate, and temperature and the energy balance describing the partition of energy are of fundamental importance to model the propagation of an earthquake rupture. These relationships can be defined thanks to laboratory experiments that simulate seismic slip. Here, we tested calcite-bearing fault rocks simulated as bare-rock and gouges. During the experiments, temperature was monitored thanks to an innovative measuring system. Numerical models were done assuming all mechanical energy was converted into heat. By comparing all results above, we discovered that the mechanical energy in both bare-rocks and gouges is converted to heat but limited by the occurrence of endothermic decarbonation reaction. In gouges, also an energy contribution for plastic deformation processes is required. Our work implies significant changes in the commonly accepted energy budget for earthquake propagation and show the importance of slip rate and temperature in driving together the dynamic weakening during seismic slip.7 23 - Some of the metrics are blocked by yourconsent settings
Item type:Publication, Access status: Open Access , Fast and Localized Temperature Measurements During Simulated Earthquakes in Carbonate Rocks
The understanding of earthquake physics is hindered by the poor knowledge of fault strength and temperature evolution during seismic slip. Experiments reproducing seismic velocity (∼1 m/s) allow us to measure both the evolution of fault strength and the associated temperature increase due to frictional heating. However, temperature measurements were performed with techniques having insufficient spatial and temporal resolution. Here we conduct high velocity friction experiments on Carrara marble rock samples sheared at 20 MPa normal stress, velocity of 0.3 and 6 m/s, and 20 m of total displacement. We measured the temperature evolution of the fault surface at the acquisition rate of 1 kHz and over a spatial resolution of ∼40 µm with an optical fiber conveying the infrared radiation to a two‐color pyrometer. Temperatures up to 1,250°C and low coseismic fault shear strength are compatible with the activation of grain size dependent viscous creep.210 420 - Some of the metrics are blocked by yourconsent settings
Item type:Publication, Access status: Open Access , Friction during earthquakes: 25 years of experimental studies
Dynamic fault strength τ (rock friction in the broad sense) and its evolution with seismic slip and slip rate are among the most relevant parameters in earthquake mechanics. Given the large slip rate (1 m s−1 on average), displacement (up to tens of meters), effective stress (tens of MPa), typical of seismic faulting at depth, thermo-mechanical effects become outstanding: dynamic fault strength is severely affected by fluid and rock phase changes, extreme grain size reduction, and the production of amorphous and unstable materials in the slipping zone. Here, first we will summarize the most relevant findings about dynamic fault strength during seismic slip mainly obtained thanks to the exploitation of dedicated experimental machines (i.e., rotary shear apparatus). However, the interpretation of this experimental dataset remains debated because of technical limitations which impede us to measure fundamental parameters such as temperature, strain rate, pore fluid pressure and grain size in the slipping zone. Without a sound estimate of these physical parameters, any constitutive law proposed to describe the evolution of dynamic fault strength during simulated seismic slip remains speculative. Then, we will discuss the results of some recent experiments which exploit new technical approaches to overcome the main limitations of the previous studies. The experimental approach, together with field studies of the geometry and architecture of exhumed faults and modelling, remains our most powerful tool to investigate seismic-related deformation mechanisms in both natural and human-induced earthquakes.69 97
