Jozinović, Dario
Preferred name
Jozinović, Dario
Email
dario.jozinovic@ingv.it
ORCID
16 results
Filters
Settings
The search returned 16 results
Now showing 1 - 10 of 16
- Some of the metrics are blocked by yourconsent settings
Item type:Publication, Access status: Open Access , Erratum: Rapid prediction of earthquake ground shaking intensity using raw waveform data and a convolutional neural network
No abstract since it is an erratum94 45 - Some of the metrics are blocked by yourconsent settings
Item type:Publication, Access status: Open Access , Rapid Prediction of Earthquake Ground Shaking Intensity Using Raw Waveform Data and a Convolutional Neural Network
This study describes a deep convolutional neural network (CNN) based technique for the prediction of intensity measurements (IMs) of ground shaking. The input data to the CNN model consists of multistation 3C broadband and accelerometric waveforms recorded during the 2016 Central Italy earthquake sequence for M $\ge$ 3.0. We find that the CNN is capable of predicting accurately the IMs at stations far from the epicenter and that have not yet recorded the maximum ground shaking when using a 10 s window starting at the earthquake origin time. The CNN IM predictions do not require previous knowledge of the earthquake source (location and magnitude). Comparison between the CNN model predictions and the predictions obtained with Bindi et al. (2011) GMPE (which require location and magnitude) has shown that the CNN model features similar error variance but smaller bias. Although the technique is not strictly designed for earthquake early warning, we found that it can provide useful estimates of ground motions within 15-20 sec after earthquake origin time depending on various setup elements (e.g., times for data transmission, computation, latencies). The technique has been tested on raw data without any initial data pre-selection in order to closely replicate real-time data streaming. When noise examples were included with the earthquake data, the CNN was found to be stable predicting accurately the ground shaking intensity corresponding to the noise amplitude.102 128 - Some of the metrics are blocked by yourconsent settings
Item type:Publication, Access status: Open Access , Which Picker Fits My Data? A Quantitative Evaluation of Deep Learning Based Seismic Pickers
(2022-01-06); ; ; ; Seismic event detection and phase picking are the base of many seismological workflows. In recent years, several publications demonstrated that deep learning approaches significantly outperform classical approaches, achieving human-like performance under certain circumstances. However, as studies differ in the datasets and evaluation tasks, it is unclear how the different approaches compare to each other. Furthermore, there are no systematic studies about model performance in cross-domain scenarios, that is, when applied to data with different characteristics. Here, we address these questions by conducting a large-scale benchmark. We compare six previously published deep learning models on eight data sets covering local to teleseismic distances and on three tasks: event detection, phase identification and onset time picking. Furthermore, we compare the results to a classical Baer-Kradolfer picker. Overall, we observe the best performance for EQTransformer, GPD and PhaseNet, with a small advantage for EQTransformer on teleseismic data. Furthermore, we conduct a cross-domain study, analyzing model performance on data sets they were not trained on. We show that trained models can be transferred between regions with only mild performance degradation, but models trained on regional data do not transfer well to teleseismic data. As deep learning for detection and picking is a rapidly evolving field, we ensured extensibility of our benchmark by building our code on standardized frameworks and making it openly accessible. This allows model developers to easily evaluate new models or performance on new data sets. Furthermore, we make all trained models available through the SeisBench framework, giving end-users an easy way to apply these models.227 141 - Some of the metrics are blocked by yourconsent settings
Item type:Publication, Access status: Open Access , Intra-domain and cross-domain transfer learning for time series data -- How transferable are the features?
(2022-03-05); ; ; ; In practice, it is very demanding and sometimes impossible to collect datasets of tagged data large enough to successfully train a machine learning model, and one possible solution to this problem is transfer learning. This study aims to assess how transferable are the features between different domains of time series data and under which conditions. The effects of transfer learning are observed in terms of predictive performance of the models and their convergence rate during training. In our experiment, we use reduced data sets of 1,500 and 9,000 data instances to mimic real world conditions. Using the same scaled-down datasets, we trained two sets of machine learning models: those that were trained with transfer learning and those that were trained from scratch. Four machine learning models were used for the experiment. Transfer of knowledge was performed within the same domain of application (seismology), as well as between mutually different domains of application (seismology, speech, medicine, finance). We observe the predictive performance of the models and the convergence rate during the training. In order to confirm the validity of the obtained results, we repeated the experiments seven times and applied statistical tests to confirm the significance of the results. The general conclusion of our study is that transfer learning is very likely to either increase or not negatively affect the predictive performance of the model or its convergence rate. The collected data is analysed in more details to determine which source and target domains are compatible for transfer of knowledge. We also analyse the effect of target dataset size and the selection of model and its hyperparameters on the effects of transfer learning.82 26 - Some of the metrics are blocked by yourconsent settings
Item type:Publication, Access status: Restricted , The New ShakeMap in Italy: Progress and Advances in the Last 10 Yr
This work describes a procedure to configure U.S. Geological Survey (USGS)-ShakeMap for a given region. The procedure is applied to Italy to update and improve the ShakeMap service provided by Istituto Nazionale di Geofisica e Vulcanologia (INGV). The new configuration features (1) the adoption of recently developed ground-motion models (GMMs) and of an updated map of VS30 for the local site effects and (2) the adoption of the newly developed USGS-ShakeMap version 4 (v.4) software (see Data and Resources). We have used the same subdivision in tectonic regimes adopted for the GMMs for the new Italian seismic hazard model (MPS19, Meletti et al., 2017) and selected the most appropriate GMMs after applica- tion of a ranking procedure consisting of statistical tests. A cross- validation technique has been applied to test the goodness of the selected configuration and to compare the ShakeMaps obtained with the old (Michelini et al., 2008) and the new settings. Finally, the INGV ShakeMap workflow has been renovated to exploit the data and analysis chain implemented at INGV from real-time data streams acquisition to analyst revised waveforms including additional data (e.g., revised location, fault geometry) that may become available days after the event occurrence.665 35 - Some of the metrics are blocked by yourconsent settings
Item type:Publication, Access status: Open Access , Transfer learning: Improving neural network based prediction of earthquake ground shaking for an area with insufficient training data
In a recent study (Jozinovi\'c et al, 2020) we showed that convolutional neural networks (CNNs) applied to network seismic traces can be used for rapid prediction of earthquake peak ground motion intensity measures (IMs) at distant stations using only recordings from stations near the epicenter. The predictions are made without any previous knowledge concerning the earthquake location and magnitude. This approach differs from the standard procedure adopted by earthquake early warning systems (EEWSs) that rely on location and magnitude information. In the previous study, we used 10 s, raw, multistation waveforms for the 2016 earthquake sequence in central Italy for 915 events (CI dataset). The CI dataset has a large number of spatially concentrated earthquakes and a dense station network. In this work, we applied the CNN model to an area around the VIRGO gravitational waves observatory sited near Pisa, Italy. In our initial application of the technique, we used a dataset consisting of 266 earthquakes recorded by 39 stations. We found that the CNN model trained using this smaller dataset performed worse compared to the results presented in the original study by Jozinovi\'c et al. (2020). To counter the lack of data, we adopted transfer learning (TL) using two approaches: first, by using a pre-trained model built on the CI dataset and, next, by using a pre-trained model built on a different (seismological) problem that has a larger dataset available for training. We show that the use of TL improves the results in terms of outliers, bias, and variability of the residuals between predicted and true IMs values. We also demonstrate that adding knowledge of station positions as an additional layer in the neural network improves the results. The possible use for EEW is demonstrated by the times for the warnings that would be received at the station PII.117 124 - Some of the metrics are blocked by yourconsent settings
Item type:Publication, Access status: Open Access , The Choice of Time–Frequency Representations of Non-Stationary Signals Affects Machine Learning Model Accuracy: A Case Study on Earthquake Detection from LEN-DB Data
(2022-01); ; ; ; Non-stationary signals are often analyzed using raw waveform data or spectrograms of those data; however, the possibility of alternative time–frequency representations being more informative than the original data or spectrograms is yet to be investigated. This paper tested whether alternative time–frequency representations could be more informative for machine learning classification of seismological data. The mentioned hypothesis was evaluated by training three well-established convolutional neural networks using nine time–frequency representations. The results were compared to the base model, which was trained on the raw waveform data. The signals that were used in the experiment are three-component seismogram instances from the Local Earthquakes and Noise DataBase (LEN-DB). The results demonstrate that Pseudo Wigner–Ville and Wigner–Ville time–frequency representations yield significantly better results than the base model, while spectrogram and Margenau–Hill perform significantly worse (p < 0.01). Interestingly, the spectrogram, which is often used in signal analysis, had inferior performance when compared to the base model. The findings presented in this research could have notable impacts in the fields of geophysics and seismology as the phenomena that were previously hidden in the seismic noise are now more easily identified. Furthermore, the results indicate that applying Pseudo Wigner–Ville or Wigner–Ville time–frequency representations could result in a large increase in earthquakes in the catalogs and lessen the need to add new stations with an overall reduction in the costs. Finally, the proposed approach of extracting valuable information through time–frequency representations could be applied in other domains as well, such as electroencephalogram and electrocardiogram signal analysis, speech recognition, gravitational waves investigation, and so on.83 67 - Some of the metrics are blocked by yourconsent settings
Item type:Publication, Access status: Open Access , Local earthquakes detection: A benchmark dataset of 3-component seismograms built on a global scale
(2020-08-06); ; ; ; Machine learning is becoming increasingly important in scientific and technological progress, due to its ability to create models that describe complex data and generalize well. The wealth of publicly-available seismic data nowadays requires automated, fast, and reliable tools to carry out a multitude of tasks, such as the detection of small, local earthquakes in areas characterized by sparsity of receivers. A similar application of machine learning, however, should be built on a large amount of labeled seismograms, which is neither immediate to obtain nor to compile. In this study we present a large dataset of seismograms recorded along the vertical, north, and east components of 1487 broad-band or very broad-band receivers distributed worldwide; this includes 629,095 3-component seismograms generated by 304,878 local earthquakes and labeled as EQ, and 615,847 ones labeled as noise (AN). Application of machine learning to this dataset shows that a simple Convolutional Neural Network of 67,939 parameters allows discriminating between earthquakes and noise single-station recordings, even if applied in regions not represented in the training set. Achieving an accuracy of 96.7, 95.3, and 93.2% on training, validation, and test set, respectively, we prove that the large variety of geological and tectonic settings covered by our data supports the generalization capabilities of the algorithm, and makes it applicable to real-time detection of local events. We make the database publicly available, intending to provide the seismological and broader scientific community with a benchmark for time-series to be used as a testing ground in signal processing.73 72 - Some of the metrics are blocked by yourconsent settings
Item type:Publication, Access status: Open Access , Masked graph neural network for rapid ground motion prediction in Italy
([Montréal]: McGill University Library, [2022]-, 2025-09-15) ;Trappolini, Danele; ; ; This study presents an updated version of TISER-GCN, a graph neural network (GCN) designed to predict maximum intensity measurements (IMs) from 10-second seismic waveforms starting at the earthquake origin time, without prior knowledge of location, distance, and magnitude. The improved model was applied to nearly 600 seismic stations from the INSTANCE benchmark dataset, significantly expanding the original TISER-GCN setup, which was limited to 39 stations in a smaller area of central Italy. Input data consist of three-component waveforms selected to ensure high quality and minimize saturation. Results show that masking stations where the P-wave arrives within the first 10 seconds , combined with the integration of additional information, reduces the mean squared error (MSE) by up to 6% for peak ground acceleration (PGA) and 5.5% for peak ground velocity (PGV), compared to the unmasked baseline. Moreover, the proposed approach yields near-zero median residuals across all IMs, mitigating the systematic underestimation observed when using a ground motion model specifically developed for Italy. These findings indicate that the model provides accurate predictions of ground motions, comparable to those obtained with the original TISER-GCN, which, however, requires a fixed seismic network geometry.8 35 - Some of the metrics are blocked by yourconsent settings
Item type:Publication, Access status: Open Access , Rapid prediction of ground shaking intensity with Graph Neural Networks
Rapid accurate prediction of strong ground shaking can be crucial for earthquake early warning. Recently, machine learning (ML), with its advances in Deep Learning (DL), has shown great potential in analysing seismic waveforms. More specifically, when using the data acquired by a seismic network, the incorporation of additional information consisting of the network station positioning into the DL model has been found beneficial to improve the accuracy of the ground motion predictions (Jozinović et al., 2022). Such spatial information can be exploited thoroughly by adopting graph structures, along with the seismic waveforms. Recent advances in adapting DL to graphs have shown promising potential in various graph- related tasks. However, these methods have not been completely adapted for seismological tasks. In this work, we advance an architecture capable of processing a set of seismic time series acquired by a network of stations using the benefits of Graph Neural Networks (GNNs) (see Fig. 1). The objective of the study is the rapid determination of the ground motion (PGA, PGV, and SA 0.3s, 1s and 3s) at farther stations that have not been yet reached by the strong ground shaking by availing of the first signals recorded at the stations close to the epicentre. The work builds upon the GNN approach proposed in Bloemheuvel et al. (2022) and incorporates transfer learning, see Jozinović et al. (2022). We apply the methodology to two datasets having very different source-receiver geometries sited in central Italy (CI, Jozinović et al., 2020, Jozinović et al., 2022) and in north-western central Italy (CW), respectively (Fig. 2). The two datasets have already been the object of similar studies using convolutional neural networks which serve as baselines for comparison. We find that the GNNs are highly suited for the analysis of seismic data from a set of stations and show improvement when compared to the previous work (Bloemheuvel et al., 2022 and Jozinović et al., 2022). We exemplify the early warning capabilities of the proposed approach.173 394
