Brogi, Federico
Preferred name
Brogi, Federico
Email
federico.brogi@ingv.it
ORCID
13 results
Filters
Settings
The search returned 13 results
Now showing 1 - 10 of 13
- Some of the metrics are blocked by yourconsent settings
Item type:Publication, Access status: Open Access , Slow to fast paces of convection in magmatic systems
Convective flows are common in volcanic feeding systems at various depths, from low-melt-fractions mush reservoirs to melt-dominated storage zones to sub-aerial lava lakes (e.g., Bergantz et al., 2015; Forni et al., 2016; Montagna and Papale, 2018; Spera and Bohrson, 2018; Valade et al., 2018). Convection plays a pivotal role in determining the thermal and chemical evolution of magmas in the Earth’s crust, being one of the main processes associated with magmatic dynamics. Within the magmatic realm, convective processes can be either natural or forced, diffusion- or buoyancy-dominated. Their length and time scales can span orders of magnitude and be more or less effective in terms of mass, momentum and energy exchange. Convective dynamics can modify the physical properties of magmas, and are in turn largely impacted by them, resulting in potentially important feed-backs. The interplay between density and viscosity of magmatic mixtures, including effects due to volatile and crystal contents, chemical and thermal diffusion time scales, as well as temperature and depth of the intrusive bodies, can define a variety of paths to re-equilibration that are reflected into very different magmatic histories. The convective regimes pertaining to magmatic systems can be identified by relevant adimensional numbers, such as Rayleigh and Atwood, and dimensional characteristic quantities. We performed a set of numerical simulations in different regimes in order to define the conditions for effective convection to take place, and the parameters that govern its length and time scales. Preliminary results reveal that buoyancy-driven reservoir-wide natural convection can be significant on relatively short time scales for volatile-rich mafic recharge into more felsic reservoirs. On the other hand, melts and magmas of larger viscosities tend to create boundary layers that evolve on longer time scales, and suppress larger scale motion. The role of volatiles, especially water, is particularly significant, as even small variations in their contents strongly affects fluid viscosity. As convection strongly enhances mechanical mixing between magmas, these results can guide the interpretation of chemical heterogeneities observed in magmatic and plutonic bodies, such as large spread in zircon-derived ages or significant differences in isotopic compositions, that are sometimes observed in both the plutonic and magmatic records (e.g., Larderello-Travale, Yellowstone: Dini et al., 2005; Farina et al., 2018; Wotzlav et al., 2014).29 59 - Some of the metrics are blocked by yourconsent settings
Item type:Publication, Access status: Open Access , MagmaFOAM-1.0: a modular framework for the simulation of magmatic systems
Numerical simulations of volcanic processes play a fundamental role in understanding the dynamics of magma storage, ascent, and eruption. The recent extraordinary progress in computer performance and improvements in numerical modeling techniques allow simulating multiphase systems in mechanical and thermodynamical disequilibrium. Nonetheless, the growing complexity of these simulations requires the development of flexible computational tools that can easily switch between sub-models and solution techniques. In this work we present MagmaFOAM, a library based on the open-source computational fluid dynamics software OpenFOAM that incorporates models for solving the dynamics of multiphase, multicomponent magmatic systems. Retaining the modular structure of OpenFOAM, MagmaFOAM allows runtime selection of the solution technique depending on the physics of the specific process and sets a solid framework for in-house and community model development, testing, and comparison. MagmaFOAM models thermomechanical nonequilibrium phase coupling and phase change, and it implements state-of-the-art multiple volatile saturation models and constitutive equations with composition-dependent and space–time local computation of thermodynamic and transport properties. Code testing is performed using different multiphase modeling approaches for processes relevant to magmatic systems: Rayleigh–Taylor instability for buoyancy-driven magmatic processes, multiphase shock tube simulations propaedeutical to conduit dynamics studies, and bubble growth and breakage in basaltic melts. Benchmark simulations illustrate the capabilities and potential of MagmaFOAM to account for the variety of nonlinear physical and thermodynamical processes characterizing the dynamics of volcanic systems.374 84 - Some of the metrics are blocked by yourconsent settings
Item type:Publication, Access status: Open Access , On floating point precision in computational fluid dynamics using OpenFOAM
Thanks to the computational power of modern cluster machines, numerical simulations can provide, with an unprecedented level of details, new insights into fluid mechanics. However, taking full advantage of this hardware remains challenging since data communication remains a significant bottleneck to reaching peak performances. Reducing floating point precision is a simple and effective way to reduce data movement and improve the computational speed of most applications. Nevertheless, special care needs to be taken to ensure the quality and convergence of computed solutions, especially when dealing with complex fluid simulations. In this work, we analyse the impact of reduced (single and mixed compared to double) precision on computational performance and accuracy for computational fluid dynamics. Using the open source library OpenFOAM, we consider incompressible, compressible, and multiphase fluid solvers for testing on relevant benchmarks for flows in the laminar and turbulent regime and in the presence of shock waves. Computational gain and changes in the scalability of applications in reduced precision are also discussed. In particular, an ad hoc theoretical model for the strong scaling allows us to interpret and understand the observed behaviours, as a function of floating point precision and hardware specifics. Finally, we show how reduced precision can significantly speed up a hybrid CPU–GPU implementation, made available to OpenFOAM end-users recently, that simply relies on a GPU linear algebra solver developed by hardware vendors.43 176 - Some of the metrics are blocked by yourconsent settings
Item type:Publication, Access status: Open Access , Short-term magma-carbonate interaction: A modelling perspective
Short-term interaction of magma with crustal carbonates can affect a volcano's eruptive style and drive even low-viscosity magmas toward large explosive eruptions. Only a few studies have focused on short-term magma-carbonate interaction under controlled laboratory conditions and the physical processes behind the experimental observations are still poorly understood. In this work, we present the first numerical modelling study of short-term magma-carbonate interaction and provide an interpretative framework for experimental and field observations. We developed thermodynamic and dynamic models for carbonate dissolution and mixing and mingling between contaminated magma pockets and host magma. We find that mixing and mingling can play a central role in modulating the efficiency of volatile exsolution. The increasing viscosity of the host melt slows down melt mingling and hence the mixing process, limiting volatile exsolution. Less efficient mixing and mingling could allow the fingerprints of short-term magma-carbonate interaction to be preserved in volcanic and intrusive rocks. Finally, we highlight that the mechanism and timescale of magma-carbonate interaction open a key question about the anomalous high mobility of CaO during carbonate dissolution.120 140 - Some of the metrics are blocked by yourconsent settings
Item type:Publication, Access status: Open Access , Fe-rich filamentary textures reveal timescales of magmatic interaction before the onset of high-energy explosive events at basaltic volcanoes
(Strasbourg: Volcanica, 2018- Strasbourg: Presses Universitaires de Strasbourg, 2025-03-28); ; ; ; Fe-rich filamentary textures are almost ubiquitous in products from explosive eruptions at basaltic volcanoes and, in particular, they characterize the groundmass of ash and lapilli emitted during high-energy events. Here, we present a multidisciplinary study integrating petrological analyses with computational fluid dynamics simulations to propose a new mechanism responsible for their formation. Detailed textural and compositional features of Fe-rich filaments were examined in the products of explosive eruptions with different intensities from Stromboli and Etna (Italy) volcanoes. Results reveal that they represent compositional boundary layers developed at the plagioclase-melt interface in response to the interaction between magmas with different compositions and volatile contents. Numerical simulations indicate that boundary layers can detach from crystals and disperse into resident melts due to their higher density and can survive as metastable melts for some days under magmatic conditions. We suggest that Fe-rich filaments testify to the recharging of deep magma a few days before high-energy explosive events at basaltic open-vent volcanoes, even when primitive magmas are not erupted.5 45 - Some of the metrics are blocked by yourconsent settings
Item type:Publication, Access status: Open Access , 44 130 - Some of the metrics are blocked by yourconsent settings
Item type:Publication, Access status: Open Access , Lattice Boltzmann modeling to explain volcano acoustic source
Acoustic pressure is largely used to monitor explosive activity at volcanoes and has become one of the most promising technique to monitor volcanoes also at large scale. However, no clear relation between the fluid dynamics of explosive eruptions and the associated acoustic signals has yet been defined. Linear acoustic has been applied to derive source parameters in the case of strong explosive eruptions which are well-known to be driven by large overpressure of the magmatic fluids. Asymmetric acoustic waveforms are generally considered as the evidence for supersonic explosive dynamics also for small explosive regimes. We have used Lattice-Boltzmann modeling of the eruptive fluid dynamics to analyse the acoustic wavefield produced by different flow regimes. We demonstrate that acoustic waveform well reproduces the flow dynamics of a subsonic fluid injection related to discrete explosive events. Different volumetric flow rate, at low-Mach regimes, can explain both the observed symmetric and asymmetric waveform. Hence, asymmetric waveforms are not necessarily related to the shock/supersonic fluid dynamics of the source. As a result, we highlight an ambiguity in the general interpretation of volcano acoustic signals for the retrieval of key eruption source parameters, necessary for a reliable volcanic hazard assessment.58 54 - Some of the metrics are blocked by yourconsent settings
Item type:Publication, Access status: Open Access , A model for multicomponent diffusive bubble growth in magmas
Bubble growth is one of the key processes that govern the degassing of magmatic systems and drive volcanic eruptions. Typically, the gas exsolution process begins with the nucleation of bubbles in an oversaturated melt and continues with bubble growth. Bubbles grow by mass diffusion, when the silicate melt is oversaturated in volatiles, and by mechanical expansion as a response to pressure decrease. The viscosity of the surrounding melt and the surface tension oppose a resistance to bubble growth and control the mechanical disequilibrium between the bubbles and the melt itself. The combination of the Rayleigh-Plesset equation with a diffusion equation represents a common approach to describe diffusive bubble growth. A number of models have been developed for describing bubble growth dynamics in magmas, most of them accounting for a single volatile specie. Nevertheless, the multicomponent nature of magmatic volatiles has long been recognised to play a major role in controlling magmatic exsolution process. Here we present a model describing bubble growth in magmas in the presence of multiple volatile species through a fully non-ideal multicomponent saturation model. Numerical simulations show the role of the different species (e.g., water and carbon dioxide) in the dynamics of diffusive bubble growth for different melt compositions. The new model is implemented in the MagmaFOAM library, a dedicated computational tool to solve multiphase flows characterizing magmatic systems that extends the open-source library OpenFOAM. Within the MagmaFOAM framework it is possible to combine the bubble growth model with fluid solvers in order to fully capture the multi-scale nature of liquid and gas phases in magmatic systems.29 74 - Some of the metrics are blocked by yourconsent settings
Item type:Publication, Access status: Open Access , A Multi-Parametric and Multi-Layer Study to Investigate the Largest 2022 Hunga Tonga–Hunga Ha’apai Eruptions
On 20 December 2021, after six quiet years, the Hunga Tonga–Hunga Ha’apai volcano erupted abruptly. Then, on 15 January 2022, the largest eruption produced a plume well registered from satellites and destroyed the volcanic cone previously formed in 2015, connecting the two islands. We applied a multi-parametric and multi-layer study to investigate all the possible preeruption signals and effects of this volcanic activity in the lithosphere, atmosphere, and ionosphere. We focused our attention on: (a) seismological features considering the eruption in terms of an earthquake with equivalent energy released in the lithosphere; (b) atmospheric parameters, such as skin and air temperature, outgoing longwave radiation (OLR), cloud cover, relative humidity from climatological datasets; (c) varying magnetic field and electron density observed by ground magnetometers and satellites, even if the event was in the recovery phase of an intense geomagnetic storm. We found different precursors of this unique event in the lithosphere, as well as the effects due to the propagation of acoustic gravity and pressure waves and magnetic and electromagnetic coupling in the form of signals detected by ground stations and satellite data. All these parameters and their detailed investigation confirm the lithosphere–atmosphere–ionosphere coupling (LAIC) models introduced for natural hazards such as volcano eruptions and earthquakes.539 128 - Some of the metrics are blocked by yourconsent settings
Item type:Publication, Access status: Open Access , Optimization strategies for efficient high-resolution volcanic plume simulations with OpenFOAM
In the last years, the interest in three-dimensional physico-mathematical models for volcanic plumes has grown, motivated by the need of predicting accurately the dispersal patterns of volcanic ash in the atmosphere (to mitigate the risks for civil aviation and for the nearby inhabited regions) and pushed by improved remote sensing techniques and measurements. However, limitations due to the mesh resolution and numerical accuracy as well as the complexity entailed model formulations, have so far prevented a detailed study of turbulence in volcanic plumes at high resolution. Eruptive columns are indeed multiphase gas-particle turbulent flows, in which the largest (integral) scale is in the order of tens or hundreds of kilometers and the smallest scale is of the order of microns. Performing accurate numerical simulations of such phenomena remains therefore a challenging task. Modern HPC resources and recent model developments enable the study of multiphase turbulent structures of volcanic plumes with an unprecedented level of detail. However, a number of issues of the present model implementation need to be addressed in order to efficiently use the computational resources of modern supercomputing machines. Here we present an overview of an optimization strategy that allows us to perform large parallel simulations of volcanic plumes using ASHEE, a numerical solver based on OpenFOAM and one of the target flagship codes of the project ChEESE (Centre of Excellence for Exascale in Solid Earth). Such optimizations include: mixed precision floating point operations to increase computational speed and reduce memory usage, optimal domain decomposition for better communication load balancing and asynchronous I/O to hide I/O costs. Scaling analysis and volcanic plume simulations are presented to demonstrate the improvement in both computational performances and computing capability.33 68
