Komatitsch, Dimitri
Preferred name
Komatitsch, Dimitri
Web Site
ORCID
7 results
Filters
Settings
The search returned 7 results
Now showing 1 - 7 of 7
- Some of the metrics are blocked by yourconsent settings
Item type:Publication, Access status: Open Access , Adjoint tomography of the Italian lithosphere
The evolution and state of geological structure at Earth’s surface is best understood with an accurate characterization of the subsurface, where fluid distribution plays a key role. We present high-resolution seismic tomographic images of tectonic and geological features of the Italian lithosphere based on ground motion recordings and obtained through an iterative procedure. Enhanced accuracy is enabled by state-of-the-art three-dimensional wavefield simulations in combination with an adjoint-state method. The resulting tomographic model characterizes the subsurface structure in terms of compressional and shear wavespeed values at remarkable resolution, corresponding to a minimum period of ~10 s. As primary findings of our work, images of the lithospheric structure in Central Italy are consistent with recent studies on the distribution of fluids and gas (CO2) within the Italian subsurface, allowing us to infer the presence of deep melted material that induces shallow gas fluxes, or traps and deep storage of gas that can be correlated with seismicity. We illuminate Mt. Etna volcano and support the hypothesis of a deep reservoir (~30 km) feeding an intermediate-depth magma-filled intrusive body, which in turn is connected to a shallow chamber. We also investigate the intriguing features of the Adriatic plate offshore of the eastern Italian coast. Tomographic evidence reveals a structure of the plate made of two distinct microplates with different fabric and behavior, and separated by the Gargano deformation zone, indicating a complex lithosphere and tectonic evolution.31 71 - Some of the metrics are blocked by yourconsent settings
Item type:Publication, Access status: Open Access , Adjoint Tomography of the Italian Lithosphere
The evolution and state of geological structure at Earth's surface is best understood with an accurate characterization of the subsurface. Here we present seismic tomographic images of the Italian lithosphere based on ground motion recordings and characterized by compressional and shear wavespeed structure at remarkable resolution, corresponding to a minimum period of ∼10 s. Enhanced accuracy is enabled by state-of-the-art three-dimensional wavefield simulations in combination with an adjoint-state method. We focus on three primary findings of our model Im25. It highlights the distribution of fluids and gas (CO2) within the Italian subsurface and their correlation with seismicity. It illuminates Mt. Etna volcano and supports the hypothesis of a deep reservoir (∼30 km) feeding a shallower magma-filled intrusive body. Offshore of the eastern Italian coast, it reveals that the Adriatic plate is made of two distinct microplates, separated by the Gargano deformation zone, indicating a complex lithosphere and tectonic evolution.408 158 - Some of the metrics are blocked by yourconsent settings
Item type:Publication, Access status: Open Access , Breaking the Adriatic Plate: Adjoint 3D Tomography for the Italian Lithosphere
The evolution and state of geological structure at Earth’s surface is best understood with an accurate characterization of the subsurface. We present high-resolution seismic tomographic images of tectonic and geological structures of the Italian lithosphere. Enhanced accuracy is enabled by state-of-the-art methods, including three-dimensional wavefield simulations in combination with an adjoint-state method. The procedure iteratively improves an initial 3D traveltime tomography model of the region using full waveforms from 163 earthquakes recorded by 412 stations. Model Im25, resulting from 25 iterations, characterizes the subsurface structure in terms of compressional and shear wavespeeds at a resolution corresponding to a minimum period ~10 s. We discuss three primary findings of Im25 model: a) images of the lithospheric structure in Central Italy highlight the role of fluids and gas (CO2) and their correlation with seismicity, b) images of Southern Italy illuminates the plumbing system of Mt. Etna volcano, c) images of the Adriatic plate explore its complex lithosphere and tectonic evolution.78 100 - Some of the metrics are blocked by yourconsent settings
Item type:Publication, Access status: Restricted , Spectral‐Element Simulations of Seismic Waves Generated by the 2009 L’Aquila Earthquake
We adopt a spectral-element method (SEM) to perform numerical simulations of the complex wavefield generated by the 6 April 2009 Mw 6.3 L’Aquila earthquake in central Italy. The mainshock is represented by a finite-fault solution obtained by inverting strong-motion and Global Positioning System data, testing both 1D and 3D wavespeed models for central Italy. Surface topography, attenuation, and the Moho discontinuity are also accommodated. Including these complexities is essential to accurately simulate seismic-wave propagation. Three-component synthetic waveforms are compared to corresponding velocimeter and strong-motion recordings. The results show a favorable match between data and synthetics up to ∼0:5 Hz in a 200 km × 200 km × 60 km model volume, capturing features mainly related to topography or low-wavespeed basins. We construct synthetic peak ground velocity maps that, for the 3D model, are in good agreement with observations, thus providing valuable information for seismic-hazard assessment. Exploiting the SEM in combination with an adjoint method, we calculate finite-frequency kernels for specific seismic arrivals. These kernels capture the volumetric sensitivity associated with the selected waveform and highlight prominent effects of topography on seismic-wave propagation in central Italy.370 54 - Some of the metrics are blocked by yourconsent settings
Item type:Publication, Access status: Open Access , Rapid Estimation of Damage to Tall Buildings Using Near Real-Time Earthquake and Archived Structural Simulations
This article outlines a new approach to rapidly estimate the damage to tall buildings immediately following a large earthquake. The preevent groundwork involves the creation of a database of structural responses to a suite of idealized ground‐motion waveforms. The postevent action involves (1) rapid generation of an earthquake source model, (2) near real‐time simulation of the earthquake using a regional spectral‐element model of the earth and computing synthetic seismograms at tall building sites, and (3) estimation of tall building response (and damage) by determining the best‐fitting idealized waveforms to the synthetically generated ground motion at the site and directly extracting structural response metrics from the database. Here, ground‐velocity waveforms are parameterized using sawtoothlike wave trains with a characteristic period (T), amplitude (peak ground velocity, PGV), and duration (number of cycles, N). The proof‐of‐concept is established using the case study of one tall building model. Nonlinear analyses are performed on the model subjected to the idealized wave trains, with T varying from 0.5 s to 6.0 s, PGV varying from 0.125 m/s, and N varying from 1 to 5. Databases of peak transient and residual interstory drift ratios (IDR), and permanent roof drift are created. We demonstrate the effectiveness of the rapid response approach by applying it to synthetic waveforms from a simulated 1857‐like magnitude 7.9 San Andreas earthquake. The peak IDR, a key measure of structural performance, is predicted well enough for emergency response decision making.81 179 - Some of the metrics are blocked by yourconsent settings
Item type:Publication, Access status: Restricted , Forward and adjoint simulations of seismic wave propagation on fully unstructured hexahedral meshes
(2011); ; ; ; We present forward and adjoint spectral-element simulations of coupled acoustic and (an)elastic seismic wave propagation on fully unstructured hexahedral meshes. Simulations benefit from recent advances in hexahedral meshing, load balancing and software optimization. Meshing may be accomplished using a mesh generation tool kit such as CUBIT, and load balancing is facilitated by graph partitioning based on the SCOTCH library. Coupling between fluid and solid regions is incorporated in a straightforward fashion using domain decomposition. Topography, bathymetry and Moho undulations may be readily included in the mesh, and physical dispersion and attenuation associated with anelasticity are accounted for using a series of standard linear solids. Finite-frequency Fre ́chet derivatives are calculated using adjoint methods in both fluid and solid domains. The software is benchmarked for a layercake model. We present various examples of fully unstructured meshes, snapshots of wavefields and finite-frequency kernels generated by Version 2.0 ‘Sesame’ of our widely used open source spectral-element package SPECFEM3D.228 28 - Some of the metrics are blocked by yourconsent settings
Item type:Publication, Access status: Restricted , CUBIT and seismic wave propagation based upon the Spectral-Element Method: An advanced unstructured mesher for complex 3D geological media
Unstructured hexahedral mesh generation is a critical part of the model- ing process in the Spectral-Element Method (SEM). We present some ex- amples of seismic wave propagation in complex geological models, automati- cally meshed on a parallel machine based upon CUBIT (Sandia Laboratory, cubit.sandia.gov), an advanced 3D unstructured hexahedral mesh genera- tor that offers new opportunities for seismologist to design, assess, and improve the quality of a mesh in terms of both geometrical and numerical accuracy. The main goal is to provide useful tools for understanding seismic phenomena due to surface topography and subsurface structures such as low wave-speed sedimentary basins. Our examples cover several typical geophysical problems: 1) “layer-cake” volumes with high-resolution topography and complex solid- solid interfaces (such as the Campi Flegrei Caldera Area in Italy), and 2) models with an embedded sedimentary basin (such as the Taipei basin in Taiwan or the Grenoble Valley in France).228 31
