Martini, Guido
8 results
Filters
Settings
The search returned 8 results
Now showing 1 - 8 of 8
- Some of the metrics are blocked by yourconsent settings
Item type:Publication, Access status: Open Access , Application of the conditional spectrum approach for the selection of ground motion time histories in vast areas: an example in the Lazio region
(Dordrecht: Springer Dordrecht : Kluwer, 2025); ; ; ; Zini, ASelection of accelerometric time histories is a fundamental step in seismic microzonation studies as well as in structural and ground response analyses. In this study we apply the procedure of Mascandola et al. (2020) for record selection in vast areas to the Lazio region (Central Italy). Unlike the original approach, we apply a different unsupervised clustering algorithm to divide the study area into mesozones, defined as zones that are homogeneous in terms of seismic hazard. Moreover, we apply the conditional spectrum ($$CS$$) method for the selection of ground motion time histories. Concerning the zoning of the study area, two clustering algorithms are compared: K-means and Spectral clustering. We found that the latter provides a zonation that is more consistent with the spatial distribution of the seismic hazard as well as of hazard disaggregation and is therefore suggested for record selection in vast areas. For each mesozone, two conditional spectra (computed for two conditioning oscillator periods) are then defined and adopted as reference for the selection of real accelerometric records. The latter are selected from a large sample of accelerograms that include earthquakes having magnitude and distance consistent with the seismic scenarios controlling the hazard. The article ends with a comparison of different techniques for the selection of real acceleration time histories. We analyze the impact of different sets of accelerograms on the ground response of two soil profiles resonating at the same periods used for conditioning the spectra (i.e., 0.2s and 1.0s). The results confirm that the conditional spectrum approach is targeted at oscillatory systems with a well-specific vibration period, for which the conditional spectrum might provide more conservative ground motions than the standard uniform hazard spectrum approach. Conversely, the latter approach is preferable for dynamic analyses of systems where more than one response period is relevant. Furthermore, our findings show that dividing the area into mesozones and selecting accelerograms using a single reference spectrum for each mesozone produces results comparable to those obtained through conventional methods based on site-specific record selection. Therefore, our approach can significantly streamline the selection of accelerometric time histories, especially in the case of vast areas.7 43 - Some of the metrics are blocked by yourconsent settings
Item type:Publication, Access status: Restricted , Extensive surface geophysical prospecting for seismic microzonation
(2020-05-27); ; ; ; This paper presents an overview of the geophysical activities for the seismic microzonation of 138 municipalities belonging to four Italian regions (Abruzzo, Lazio, Marche and Umbria) that were severely damaged by the seismic sequence of Central Italy (August 2016–January 2017). This study is the result of a collaborative effort between research Institutions and professional geologists with the support of local Administrations and the Italian Civil Protection Department and sets an unprecedented large-scale example of geophysical investigations supporting detailed seismic microzonation studies. This manuscript presents the methodological approach adopted for the geophysical activities, including the technical protocols and procedures, the best practices, the final products and the results supporting a detailed microzonation study of III level. The first step of the study was the collection and critical review of all available geophysical and geological information for planning the new geophysical surveys (specifically their type and location), in order to assess the subsoil geometry and the seismic characterization of the areas under investigation. Integration with the newly acquired geophysical data allowed the identification of zones with homogeneous local seismic hazard as well as the reference seismo-stratigraphy for each area, defining for each geological unit the ranges of the relevant properties in seismic amplification studies: layering and thicknesses, density, P-wave and S-wave seismic velocity. We also present a few representative case studies illustrating the geophysical investigation for different geomorphological situations. These examples, together with the findings of the entire project, are discussed to point out the strength points and the criticalities, as well as the necessary requirements in the application of geophysical methods to detailed microzonation studies.167 4 - Some of the metrics are blocked by yourconsent settings
Item type:Publication, Access status: Restricted , The 2016–2017 earthquake sequence in Central Italy: macroseismic survey and damage scenario through the EMS-98 intensity assessment
In this paper we describe the macroseismic effects produced by the long and destructive seismic sequence that hit Central Italy from 24 August 2016 to January 2017. Starting from the procedure adopted in the complex field survey, we discuss the characteristics of the building stock and its classification in terms of EMS-98 as well as the issues associated with the intensity assessment due to the evolution of damage caused by multiple shocks. As a result, macroseismic intensity for about 300 localities has been determined; however, most of the intensities assessed for the earthquakes following the first strong shock on 24 August 2016, represent the cumulative effect of damage during the sequence. The earthquake parameters computed from the macroseismic datasets are compared with the instrumental determinations in order to highlight critical issues related to the assessment of macroseismic parameters of strong earthquakes during a seismic sequence. The results also provide indications on how location and magnitude computation can be strongly biased when dealing with historical seismic sequences.1625 26 - Some of the metrics are blocked by yourconsent settings
Item type:Publication, Access status: Open Access , Temporary dense seismic network during the 2016 Central Italy seismic emergency for microzonation studies
In August 2016, a magnitude 6.0 earthquake struck Central Italy, starting a devastating seismic sequence, aggravated by other two events of magnitude 5.9 and 6.5, respectively. After the first mainshock, four Italian institutions installed a dense temporary network of 50 seismic stations in an area of 260 km2. The network was registered in the International Federation of Digital Seismograph Networks with the code 3A and quoted with a Digital Object Identifier ( https://doi.org/10.13127/SD/ku7Xm12Yy9 ). Raw data were converted into the standard binary miniSEED format, and organized in a structured archive. Then, data quality and completeness were checked, and all the relevant information was used for creating the metadata volumes. Finally, the 99 Gb of continuous seismic data and metadata were uploaded into the INGV node of the European Integrated Data Archive repository. Their use was regulated by a Memorandum of Understanding between the institutions. After an embargo period, the data are now available for many different seismological studies.2864 192 - Some of the metrics are blocked by yourconsent settings
Item type:Publication, Access status: Open Access , Quest- Rilievo Macrosismico Per Il Terremoto Dell'Isola Di Ischia Del 21 Agosto 2017
Final report of the Macroseismic field survey after the Ischia island earthquake that occurred on 21 August 2017111 197 - Some of the metrics are blocked by yourconsent settings
Item type:Publication, Access status: Open Access , Quest- Rilievo Macrosismico Per Il Terremoto Dell'Isola Di Ischia Del 21 Agosto 2017
Preliminary report of the Macroseismic field survey after the Ischia island earthquake that occurred on 21 August 2017100 162 - Some of the metrics are blocked by yourconsent settings
Item type:Publication, Access status: Open Access , Macroarea 8 (Poggio Roio, Colle Roio, Roio Piano, S. Rufina Contrada Cavalli)
(Regione Abruzzo- Presidenza del Consiglio dei Ministri, Dipartimento della Protezione Civile, L’Aquila, 2010-07); ; ; ; Nell'ambito del progetto per la Microzonazione sismica dell'area aquilana, coordinata dal DPC, il Gruppo di Lavoro ha condotto le indagini di MS nella Conca di Roio.165 163 - Some of the metrics are blocked by yourconsent settings
Item type:Publication, Access status: Open Access , La Microzonazione Sismica della Macroarea 8 (Poggio di Roio, Colle di Roio, Roio Piano, Santa Rufina; AQ): Un esempio d’applicazione di approccio metodologico multidisciplinare.
(2009-11-16); ; ; ; Nell’ambito del Piano di Microzonazione Sismica (di seguito MS) dei Comuni colpiti dal terremoto dell’Aquila in data 6/04/2009, promosso e coordinato dal Dipartimento di Protezione Civile Nazionale con OPCM n. 3772 del 19 maggio 2009, si è costituito un Gruppo di Lavoro (di seguito GdL) al fine di realizzare la MS del territorio denominato Macroarea 8 (di seguito MA8). Il81 100
