Cushing, Edward Marc
Preferred name
Cushing, Edward Marc
Alternative Name
Cushing, Marc Edward
5 results
Filters
Settings
The search returned 5 results
Now showing 1 - 5 of 5
- Some of the metrics are blocked by yourconsent settings
Item type:Publication, Access status: Open Access , The European Fault-Source Model 2020 (EFSM20): geologic input data for the European Seismic Hazard Model 2020
(2024-11-19); ; ; ; Pires Vilanova, Susana<jats:p>Abstract. Earthquake hazard analyses rely on seismogenic source models. These are designed in various fashions, such as point sources or area sources, but the most effective is the three-dimensional representation of geological faults. We here refer to such models as fault sources. This study presents the European Fault-Source Model 2020 (EFSM20), which was one of the primary input datasets of the recently released European Seismic Hazard Model 2020. The EFSM20 compilation was entirely based on reusable data from existing active fault regional compilations that were first blended and harmonized and then augmented by a set of derived parameters. These additional parameters were devised to enable users to formulate earthquake rate forecasts based on a seismic-moment balancing approach. EFSM20 considers two main categories of seismogenic faults: crustal faults and subduction systems, which include the subduction interface and intraslab faults. The compiled dataset covers an area from the Mid-Atlantic Ridge to the Caucasus and from northern Africa to Iceland. It includes 1248 crustal faults spanning a total length of ∼95 100 km and four subduction systems, namely the Gibraltar, Calabrian, Hellenic, and Cyprus arcs, for a total length of ∼2120 km. The model focuses on an area encompassing a buffer of 300 km around all European countries (except for Overseas Countries and Territories) and a maximum of 300 km depth for the subducting slabs. All the parameters required to develop a seismic source model for earthquake hazard analysis were determined for crustal faults and subduction systems. A statistical distribution of relevant seismotectonic parameters, such as faulting mechanisms, slip rates, moment rates, and prospective maximum magnitudes, is presented and discussed to address unsettled points in view of future updates and improvements. The dataset, identified by the DOI https://doi.org/10.13127/efsm20 (Basili et al., 2022), is distributed as machine-readable files using open standards (Open Geospatial Consortium). </jats:p>14 70 - Some of the metrics are blocked by yourconsent settings
Item type:Product, Access status: Open Access , 53 383 - Some of the metrics are blocked by yourconsent settings
Item type:Publication, Access status: Open Access , Can broad-band earthquake site responses be predicted by the ambient noise spectral ratio? Insight from observations at two sedimentary basins
Site-effect assessments performed through earthquake-based approaches, such as the standard spectral ratio (SSR), require good quality records of numerous earthquakes. In contrast, the use of ambient noise appears to be an attractive solution for ease and rapid computation of site responses with sufficient spatial resolution (microzonation), especially in low seismicity areas. Two main approaches are tested here: the horizontal-to-vertical spectral ratio (HVSR) and the noise-based SSR (SSRn). The HVSR uses the relative amplitude of the horizontal and vertical components of the ambient noise. Instead, the SSRn defines the spectral ratio between the seismic noise recorded simultaneously at a site and at a rock reference station, similar to earthquake-based SSR. While the HVSR is currently used in hundreds of site-specific studies, the SSRn approach has been gradually abandoned since the 1990s. In this study, we compare the results obtain from these two approaches with those of earthquake-based SSR. This comparison is carried out for two sedimentary basins, in Provence (southeastern France) and in Argostoli (western Greece). In agreement with the literature, the HVSR does not provide more than the fundamental resonance frequency of the site (f0). The SSRn leads to overestimation of the SSR amplification factors for frequencies higher than the minimal f0 of the basin (f0min). This discrepancy between SSRn and SSR is discussed, and appears to be mainly dependent on the local geological configuration. We thus introduce the hybrid standard spectral ratio (SSRh) approach, which aims to improve upon the SSRn by adding an intermediate station inside the basin for which the SSR is known. This station is used in turn as a local reference inside the basin for the SSRn computation. The SSRh provides site transfer functions very similar to those of the SSR, in a broad frequency range. Based on these results, the SSRn (or SSRh) should be further tested and should receive renewed attention for microzonation inside sedimentary basins.172 197 - Some of the metrics are blocked by yourconsent settings
Item type:Publication, Access status: Open Access , Broadband site effect assessment: comparison between approaches based on earthquakes and microtremors on two sites
In the last decades, the use of microtremors to assess linear site effects has received a significant attention. Various authors demonstrate the reliability of ambient noise processing techniques to assess the relative amplification generally between distant sites (>1-10 km) in the low frequency range (<1 Hz). In this study we attempt to evaluate the validity of such an approach at the scale of an industrial facility (≈300 m) and up to high frequency (≈10 Hz) on two sites: an industrial site located across a small sedimentary basin in the low-to-moderate seismicity context of Southeastern France (Provence) and another sedimentary basin in the seismically active island of Cephalonia in Greece. On both sites, transfer functions relative to a rock reference deduced from microtremors (SSRn) are compared to those obtained from earthquake recordings with the classical Standard Spectral Ratio (SSR) approach. We find a good agreement between both approaches until intermediate frequencies. We thus propose an approach based on microtremor recordings and on one neighboring available SSR computed for a station located inside the basin (SSRh). This new approach seems reliable to assess the spatial variability of the site amplification up to high frequency (microzonation). The upper frequency limit for both noise approaches (SSRn and SSRh) is discussed according to the inter-station distance and to the stations geological context.89 464 - Some of the metrics are blocked by yourconsent settings
Item type:Publication, Access status: Restricted , Source parameters of the 11 June 1909, Lambesc (Provence, southeastern France) earthquake: a reappraisal based on macroseismic, seismological and geodetic observations
(2003); ; ; ; Destructive earthquakes are rare in France yet pose a sizable seismic hazard, especially when critical infrastructures are concerned. Only a few destructive events have occurred within the instrumental period, the most important being the 11 June 1909, Lambesc (Provence) earthquake. With a magnitude estimated at 6.2 [Rothé, 1942], the event was recorded by 30 observatories and produced intensity IX effects in the epicentral area, ~30 km north of Marseille. We collected 30 seismograms, leveling data and earthquake intensities to assess the magnitude and possibly the focal mechanism of this event. Following this multidisciplinary approach, we propose a source model where all relevant parameters are constrained by at least two of the input datasets. Our reappraisal of the seismological data yielded Mw 5.8-6.1 (6.0 preferred) and Ms 6.0, consistent with the magnitude from intensity data (Me 5.8) and with constraints derived from modeling of coseismic elevation changes. Hence, we found the Lambesc earthquake to have been somewhat smaller than previously reported. Our datasets also constrain the geometry and kinematics of faulting, suggesting that the earthquake was generated by reverse-right lateral slip on a WNW-striking, steeply north-dipping fault beneath the western part of the Trévaresse fold. This result suggests that the fold, located in front of the Lubéron thrust, plays a significant role in the region’s recent tectonic evolution. The sense of slip obtained for the 1909 rupture also agrees with the regional stress field obtained from earthquake focal mechanisms and microtectonic data as well as recent GPS data.257 780
