Comina, Cesare
6 results
Settings
The search returned 6 results
Now showing 1 - 6 of 6
- Some of the metrics are blocked by yourconsent settings
Item type:Publication, Access status: Open Access , Marl Mining Activity and Negative Repercussions for Two Hillside Villages (Northern Italy)
Coniolo and Brusaschetto, are two small towns located in the Monferrato area of the Alessandria Province, northern Italy. These communities have similar histories related to develop ment and subsequent abandonment of marl quarry activity that began more than a century ago and continued until recently. Quarrying occurred until soil conditions, water infiltration, and excessive depth made cost of extracting and7 lifting material prohibitive. Quarries consisted of tunnels located directly beneath the towns at about 150 m below ground surface. Collapse of the tunnels led to surface subsidence and destruction of overlying homes and much of the municipal infrastructure. In the early Twentieth Century, regulations pertaining to mine and quarry safety were typically deficient, entirely absent, or not followed. Extractive activities of non-energy mineral resources from quarries and mines were and continue to be widespread in Italy, which currently ranks fifth among what are now countries of the European Union (EU). Mining sites are present in all regions of Italy, particu larly in the northern part of the country and along coasts, often in areas of geohydrogeological risk. Consequences of anthropogenic pressures that alter the natural environment, such as the physical size of aquifer drawdowns, are linked to issues for a number of extractive sites across the country. This report analyzes historical and technical documents, conducts a geomorphological analysis of hilly slopes surrounding these communities, and examines urban planning and geophysical surveys to determine the impact of subsurface quarrying activities on the overlying ground surface. The study highlights significant problems that are applicable to other localities globally. This research demonstrates: (a) the importance of geological considerations to development and abandonment of mining activity in inhabited areas; (b) the importance of establishing and following safety protocols; and (c) the manner in which economic interests can take precedence over the well-being and lives of those employed to extract resources.42 46 - Some of the metrics are blocked by yourconsent settings
Item type:Publication, Access status: Open Access , Blast-induced liquefaction in silty sands for full-scale testing of ground improvement methods: Insights from a multidisciplinary study
In the engineering geology field increased attention has been posed in recent years to potential liquefaction mitigation interventions in susceptible sand formations. In silty sands this is a major challenge because, as the fines content increases, vibratory methods for densification become progressively less effective. An alternative mitigation technique can be the installation of Rammed Aggregate Pier® (RAP) columns that can increase the resistance of the soil, accounting for its lateral stress increase and for the stiffness increase from soil and RAP composite response. To investigate the influence of these factors on liquefaction resistance, full-scale blast tests were performed at a silty sand site in Bondeno (Ferrara, Italy) where liquefaction was observed after the 2012 Emilia-Romagna earthquake. A multidisciplinary team of forty researchers carried out devoted experimental activities aimed at better understanding the liquefaction process at the field scale and the effectiveness of the treatment using inter-related methods. Both natural and improved areas were investigated by in-situ tests and later subjected to controlled blasting. The blast tests were monitored with geotechnical and geophysical instrumentation, topographical surveying and geological analyses on the sand boils. Results showed the RAP effectiveness due to the improvement of soil properties within the liquefiable layer and a consequent reduction of the blast-induced liquefaction settlements, likely due to soil densification and increased lateral stress. The applied multidisciplinary approach adopted for the study allowed better understanding of the mechanism involved in the liquefaction mitigation intervention and provided a better overall evaluation of mitigation effectiveness2078 132 - Some of the metrics are blocked by yourconsent settings
Item type:Publication, Access status: Open Access , Combined P- and S-Wave Measurements by Seismic Dilatometer Test (SPDMT): A Case History in Bondeno (Emilia Romagna, Italy)
A new seismic dilatometer (SPDMT) has been developed to combine the measurements of the flat dilatometer (DMT) geotechnical parameters with both P- and S- waves velocities. This new SPDMT is composed of the traditional mechanical DMT and four sensors for measuring the body waves velocities placed above the DMT blade. This SPDMT device is presented here, and the test procedure and the interpretation of P- and S-wave measurements are discussed. Results of the application of this new instrument are reported in a test site located in Bondeno (Emilia Romagna, Italy). Here, challenging water table conditions offer the opportunity to evaluate the advantage of a combined measure of the two propagation velocities, together with DMT geotechnical parameters, with the same apparatus for the porosity evaluation and a more calibrated liquefaction assessment.49 190 - Some of the metrics are blocked by yourconsent settings
Item type:Publication, Access status: Restricted , Geophysical Monitoring of Blast-induced Liquefaction at the Mirabello (NE Italy) Test Site
A blast-induced liquefaction test was conducted in the surroundings of Mirabello (NE Italy), where extensive liquefaction phenomena were observed after the 2012 Emilia earthquake. This experiment is the first blast-induced liquefaction test carried out in Italy. Several geophysical investigations were performed at the site to define initial soil condition and to evaluate the variations of the geophysical parameters over time. Specifically compressional (VP) and shear (VS) wave velocities were measured using both invasive (down-hole) and non-invasive (surface wave) tests. Electric Resistivity Tomography (ERT) tests were also carried out. Tests results before and after the blast-induced liquefaction are here presented and discussed with respect to the observed liquefaction effects. The evolution of measured geophysical parameters suggests that the soil modifications due to blasting (i.e., changes in porosity and soil structure) can be imaged with the adopted approaches.86 2 - Some of the metrics are blocked by yourconsent settings
Item type:Publication, Access status: Restricted , Guidelines for the good practice of surface wave analysis: a product of the InterPACIFIC project
Surface wave methods gained in the past decades a primary role in many seismic projects. Specifically, they are often used to retrieve a 1D shear wave velocity model or to estimate the VS,30 at a site. The complexity of the interpretation process and the variety of possible approaches to surface wave analysis make it very hard to set a fixed standard to assure quality and reliability of the results. The present guidelines provide practical information on the acquisition and analysis of surface wave data by giving some basic principles and specific suggestions related to the most common situations. They are primarily targeted to non-expert users approaching surface wave testing, but can be useful to specialists in the field as a general reference. The guidelines are based on the experience gained within the InterPACIFIC project and on the expertise of the participants in acquisition and analysis of surface wave data.203 5 - Some of the metrics are blocked by yourconsent settings
Item type:Publication, Access status: Open Access , The first Italian blast-induced liquefaction test (Mirabello, Emilia-Romagna, Italy): description of the experiment and preliminary results
Soil liquefaction can result in significant settlement and reduction of load-bearing capacity. Moreover, the generation of pore pressure during an earthquake and its post-seismic dissipation can generate permanent deformations and settlements. The quantitative evaluation of post-liquefaction settlements is of extreme importance for engineering purposes, i.e. for earthquake-resistant design of new buildings and safety evaluation of existing ones. Quantifying the extent of these phenomena is, however, rather difficult. Uncertainties arise from the stochastic nature of the earthquake loading, from the simplifications of soil models, and from the difficulty in establishing correlations between the pre-earthquake soil state and the post-seismic deformations. Field scale liquefaction tests, under controlled conditions, are therefore important for a correct quantification of these phenomena. Recent experiences (e.g. New Zealand, United States) show that liquefaction can be induced and monitored with field scale blast tests to study the related effects on soil geotechnical properties. Within this framework this paper introduces the preliminary results obtained from a research project on blast-induced liquefaction at field scale. Tests were performed at a trial site located in Mirabello (Ferrara, Italy), a village strongly affected by liquefaction phenomena during the 2012 Emilia Romagna earthquake. Invasive tests, such as piezocone, seismic dilatometer and down-hole tests, and non-invasive tests were carried out before and after the execution of two blast test sequences to study the variation in physical properties of the soils. Pore pressure transducers, settlement profilometers and accelerometers were installed with the objective of measuring, during and after the detonations, the generation and subsequent dissipation of the pore pressure, the vertical deformations, and the blast-induced ground motions respectively. Variations in load distribution on deep foundations due to soil liquefaction were also evaluated on a test micropile instrumented with a strain gauge array. Topographical surveys were carried out to measure ground surface settlements. Laboratory tests and trenches also provided increased understanding of the site characteristics.1606 185
