Skip to main content
The search returned 6 results
Now showing 1 - 6 of 6
  • Some of the metrics are blocked by your 
    Item type:Publication, Access status: Restricted ,

    The liquefaction evidences following the 2020 Petrinja earthquake (Pannonian basin, Croatia): A full database and insights for phenomena comprehension

    (Earthquake Engineering Research Institute:499 14th Street, Suite 320:Oakland, CA 94612:(510)451-0905, EMAIL: eeri@eeri.org, INTERNET: http://www.eeri.org, Fax: (510)451-5411, 2025-03-25) ; ;
    Valvano, Christian
    ;
    Wacha, Lara
    ;
    The 2020 MW 6.4 Petrinja (Croatia) earthquake induced extensive and diversified liquefaction and lateral spreading phenomena within ’ 20 km radius from the epicenter. A detailed investigation from field and Unmanned Aerial Vehicle (UAV) surveys was carried out by a European researcher team (EUTeam) in the months following the mainshock. This work focuses on 61 surveyed sites: field observations were coupled with laboratory tests for soil classification and sediment composition. The adopted procedure provides an in-depth geological and geotechnical characterization of the liquefied sites in the Petrinja region. The liquefaction evidences are mainly associated to alluvial plain environments, in particular to meander paleochannels, and the ejected material is predominantly siliciclastic, made up of very rounded quartz-rich lithics. Few sites are dominated by angular carbonate rock fragments, related to liquefaction in cataclastic deposits along tectonic fractures. The ejected sediment includes a wide range of grain-size from silt to gravel. The peculiar presence of gravel in the liquefied deposits (up to 28% in some samples) confirms the need of expanding the grain-size boundaries for liquefiable coarse-grained gravelly soils. The information gathered from the postearthquake surveys and from the sedimentological and geotechnical analysis for each studied site were compiled in organized data sheets, providing a striking instrument for in-depth earthquake studies, both for geological and geotechnical engineering purposes. The format defined for the data sheet can be functional and applicable also in liquefaction studies from different geological and depositional settings.
      7
  • Some of the metrics are blocked by your 
    Item type:Publication, Access status: Open Access ,

    Liquefied sites of the 2012 Emilia earthquake: a comprehensive database of the geological and geotechnical features (Quaternary alluvial Po plain, Italy)

    This paper presents a comprehensive geological and geotechnical study of the whole area affected by liquefaction following the 2012 Emilia earthquakes, including all the available information from the field reconnaissance surveys, in situ tests, and laboratory analyses. The compilation was performed at 120 liquefied sites to verify and validate the reliability of liquefaction charts in alluvial sediments, and to assess liquefaction induced by the 2012 seismic sequence in the Emilia plain. The results reveal a wide range of grain sizes (from clean sands to sandy silts) and compositional characteristics (quartz-rich to litharenitic) in the 2012 ejecta, and show a strong relationship between the liquefaction and stratigraphic architecture of the subsurface. The availability of in situ tests at the liquefied sites makes it possible to verify and validate the reliability of the liquefaction charts in alluvial sediments with respect to the real observations. For the analyzed Emilia case studies, the use of non-liquefiable crust provides better estimations of the liquefaction manifestations when coupled with the thickness of the liquefiable layer rather than with the liquefaction potential index. Altogether, this work makes available to the international scientific community a consistent liquefaction database for in-depth earthquake studies
      237  110
  • Some of the metrics are blocked by your 
    Item type:Publication, Access status: Open Access ,

    Blast-induced liquefaction in silty sands for full-scale testing of ground improvement methods: Insights from a multidisciplinary study

    In the engineering geology field increased attention has been posed in recent years to potential liquefaction mitigation interventions in susceptible sand formations. In silty sands this is a major challenge because, as the fines content increases, vibratory methods for densification become progressively less effective. An alternative mitigation technique can be the installation of Rammed Aggregate Pier® (RAP) columns that can increase the resistance of the soil, accounting for its lateral stress increase and for the stiffness increase from soil and RAP composite response. To investigate the influence of these factors on liquefaction resistance, full-scale blast tests were performed at a silty sand site in Bondeno (Ferrara, Italy) where liquefaction was observed after the 2012 Emilia-Romagna earthquake. A multidisciplinary team of forty researchers carried out devoted experimental activities aimed at better understanding the liquefaction process at the field scale and the effectiveness of the treatment using inter-related methods. Both natural and improved areas were investigated by in-situ tests and later subjected to controlled blasting. The blast tests were monitored with geotechnical and geophysical instrumentation, topographical surveying and geological analyses on the sand boils. Results showed the RAP effectiveness due to the improvement of soil properties within the liquefiable layer and a consequent reduction of the blast-induced liquefaction settlements, likely due to soil densification and increased lateral stress. The applied multidisciplinary approach adopted for the study allowed better understanding of the mechanism involved in the liquefaction mitigation intervention and provided a better overall evaluation of mitigation effectiveness
      2078  132
  • Some of the metrics are blocked by your 
    Item type:Publication, Access status: Restricted ,

    Liquefaction source layer for sand blows induced by the 2016 megathrust earthquake (Mw 7.8) in Ecuador (Boca de Briceño)

    Numerous sand boils were generated in the alluvial plain at the mouth of the Rio Brice˜no valley (Ecuador) during the Mw 7.8 earthquake of April 2016. The area is characterized by a series of raised marine terraces formed as a consequence of the rapid tectonic coastal uplift during the Quaternary. Boreholes and geotechnical investigations were carried during post-earthquake surveys and for the purpose of mitigating the liquefaction effects. Five lithological units were identified at a site of embankment, which represented continental-marine and transitional sedimentation since the Last Glacial Maximum. A comprehensive study of texture and petrographic composition of sand boils has been performed and compared with sandy silts and silty sands of the buried sedimentary sequence in order to identify the source levels for liquefaction. The petrographic components, in particular the low content of bioclasts and carbonate fragments of the sand boils, allow to pinpoint a source layer made up of fine-grained silty sands located between 2 and 4.5 m depth (Unit 2) whereas the deeper marine sands, richer in bioclasts, were not involved. The results support the idea that earthquake-induced liquefaction phenomena are not restricted to clean sands and well-sorted deposits, but may affect sand layers with significant amount of nonplastic silt.
      202  63
  • Some of the metrics are blocked by your 
    Item type:Publication, Access status: Restricted ,

    Sand Liquefaction Induced By a Blast Test: New Insights On Source Layer and Grain-Size Segregation Mechanisms (Late Quaternary, Emilia, Italy)

    The composition and texture of liquefied sands represent an important tool for the recognition of buried source layers and for a better understanding of earthquake-induced liquefaction mechanisms. The earthquakesimulating field experiment (blast test) carried out in 2016 in fluvial sediments of the Emilia plain induced subsurface liquefaction and the surface expulsion of sand as sand blows. The area was widely affected by liquefaction phenomena during the Mw 6.1 Emilia earthquake (2012). The grain size and composition of sand blows ejected during the blast test have been compared with various horizons of buried fluvial sediments as deep as 20 m, and with sands from two trenches in the blast site representative of co-seismic 2012 liquefied sands. The sands from the cores show a clear trend from shallow lithoarenitic to deeper quartz–feldspar-rich compositions. The sands at shallow depth (up to 7.7 m) are the most lithoarenitic, with fine-grained sedimentary rock fragments (shales, siltstones, and limestone) as the dominant lithic type. Lithic fragments derive mostly from erosion of sedimentary terrigenous and carbonate successions of Apenninic affinity. In contrast, deeper sands (at depth . 7.7 m) are enriched in quartz and feldspars and impoverished in lithic fragments, which are similar in character to Po River sands. The composition of ejected sands largely overlap that of the shallow litharenitic Apenninic sands, indicating that liquefaction processes affected mainly sand layers at relatively shallow depth (5.9–7.7 m). Textural parameters show that silty sands and silts characterized by relatively high content of fines can also liquefy. This is in contrasts to most of the literature, where fine-grained sediments are considered as incapable of generating the high pore pressures commonly associated with liquefaction. This result should be considered when estimating the liquefaction as a potential hazard. Moreover, we observe that there is a selective loss of fines in the clastic dikes and sand volcanoes relative to the source beds, indicating that the liquefaction process appears to preferentially select the diameters of the grains that reach the ground surface, probably following the generated excess pore-water pressure. This may have caused the segregation and dispersion of the fine silt–clay content, producing highly sorted sand boils. This effect is easily observable in both the blast-induced sand boils, and the co-seismic 2012 dikes and sand boils ejected in the same area.
      270  2
  • Some of the metrics are blocked by your 
    Item type:Publication, Access status: Open Access ,

    The first Italian blast-induced liquefaction test (Mirabello, Emilia-Romagna, Italy): description of the experiment and preliminary results

    Soil liquefaction can result in significant settlement and reduction of load-bearing capacity. Moreover, the generation of pore pressure during an earthquake and its post-seismic dissipation can generate permanent deformations and settlements. The quantitative evaluation of post-liquefaction settlements is of extreme importance for engineering purposes, i.e. for earthquake-resistant design of new buildings and safety evaluation of existing ones. Quantifying the extent of these phenomena is, however, rather difficult. Uncertainties arise from the stochastic nature of the earthquake loading, from the simplifications of soil models, and from the difficulty in establishing correlations between the pre-earthquake soil state and the post-seismic deformations. Field scale liquefaction tests, under controlled conditions, are therefore important for a correct quantification of these phenomena. Recent experiences (e.g. New Zealand, United States) show that liquefaction can be induced and monitored with field scale blast tests to study the related effects on soil geotechnical properties. Within this framework this paper introduces the preliminary results obtained from a research project on blast-induced liquefaction at field scale. Tests were performed at a trial site located in Mirabello (Ferrara, Italy), a village strongly affected by liquefaction phenomena during the 2012 Emilia Romagna earthquake. Invasive tests, such as piezocone, seismic dilatometer and down-hole tests, and non-invasive tests were carried out before and after the execution of two blast test sequences to study the variation in physical properties of the soils. Pore pressure transducers, settlement profilometers and accelerometers were installed with the objective of measuring, during and after the detonations, the generation and subsequent dissipation of the pore pressure, the vertical deformations, and the blast-induced ground motions respectively. Variations in load distribution on deep foundations due to soil liquefaction were also evaluated on a test micropile instrumented with a strain gauge array. Topographical surveys were carried out to measure ground surface settlements. Laboratory tests and trenches also provided increased understanding of the site characteristics.
      1606  185