Albarello, Dario
Preferred name
Albarello, Dario
ORCID
54 results
Filters
Settings
The search returned 54 results
Now showing 1 - 10 of 54
- Some of the metrics are blocked by yourconsent settings
Item type:Publication, Access status: Restricted , Seismic hazard assessment in terms of macroseismic intensity in Italy: a critical analysis from the comparison of different computational procedures
(2010); ; ; ; Gomez Capera, A. A.; Istituto Nazionale di Geofisica e Vulcanologia, Sezione Milano-Pavia, Milano, ItaliaTwo probabilistic seismic hazard (PSH) maps in terms of macroseismic intensity characterized by an exceedance probability of 10% for exposure time of 50 years are presented and compared. The first map adopts the standard Cornell– McGuire approach and follows the computational scheme developed for the reference Italian peak ground acceleration (PGA) hazard map (MPS04), while the second one is derived through an alternative methodology (referred to here as the site approach) that is based on statistical analysis of the site seismic history (i.e., macroseismic intensities documented for past earthquakes). Because the two procedures make a different use of available information, this comparison provides a new insight about the sensitivity of PSH estimates for the different possible methodological choices. In particular, it is shown that, though basic differences exist between the two adopted methodologies, relevant results appear consistent over most of Italy. However, at a significant number of investigated localities (Italian municipalities), PSH estimates provided by the site approach are larger than those derived from the standard technique. Thus, a detailed analysis has been carried out to evaluate the role played by different choices of computational models and input data. Among these, the use/nonuse of seismogenic zoning seems to act as the key element in determining the pattern of differences observed between the two PSH estimates.479 33 - Some of the metrics are blocked by yourconsent settings
Item type:Publication, Access status: Restricted , Clustering analysis of probabilistic seismic hazard for the selection of ground motion time histories in vast areas
We present a methodology for the selection of accelerometric time histories as input for dynamic response analyses over vast areas. The method is primarily intended for seismic microzonation studies and regional probabilistic seismic hazard assessments that account for site effects. It is also suitable for structural response analyses if one would like to use a fixed set of ground motion records for analyzing multiple structures with different (or unknown) periods. The proposed procedure takes advantage of unsupervised machine learning techniques to identify zones (i.e., groups of sites) with homogeneous seismic hazard, for which the same set of earthquake recordings can be reasonably used in the numerical simulations. The procedure consists of three steps: (1) data-driven cluster analysis to identify groups of sites with comparable seismic hazard levels for a specified mean return period (MRP); (2) for each zone, definition of a single, reference uniform hazard spectrum (UHS) corresponding to the MRP of interest; (3) selection of a set of accelerometric recordings that are consistent with the magnitude-distance scenarios contributing to the hazard of each zone, and meet the spectrum-compatibility requirement with respect to the reference UHS. An application of the procedure in the Po Plain (Northern Italy) is described in detail.257 3 - Some of the metrics are blocked by yourconsent settings
Item type:Publication, Access status: Restricted , Scoring and Testing Procedures Devoted to Probabilistic Seismic Hazard Assessment
(2015-03); ; ;Albarello, D.; Dipartimento di Scienze Fisiche, della Terra e dell’Ambiente, Universita` degli Studi di Siena ;D’Amico, V.; Istituto Nazionale di Geofisica e Vulcanologia, Sezione Pisa, Pisa, ItaliaThis review addresses long-term (tens of years) seismic ground-motion forecasting (seismic hazard assessment) in the presence of alternative computational models (the so-called epistemic uncertainty affecting hazard estimates). We review the different approaches that have been proposed to manage epistemic uncertainty in the context of probabilistic seismic hazard assessment (PSHA). Ex-ante procedures (based on the combination of expert judgments about inherent characteristics of the PSHA model) and expost approaches (based on empirical comparison of model outcomes and observations) should not be considered as mutually exclusive alternatives but can be combined in a coherent Bayesian view. Therefore, we propose a procedure that allows a better exploitation of available PSHA models to obtain comprehensive estimates, which account for both epistemic and aleatory uncertainty. We also discuss the respective roles of empirical ex-post scoring and testing of alternative models concurring in the development of comprehensive hazard maps. In order to show how the proposed procedure may work, we also present a tentative application to the Italian area. In particular, four PSHA models are evaluated ex-post against macroseismic effects actually observed in a large set of Italian municipalities during the time span 1957–2006. This analysis shows that, when the whole Italian area is considered, all the models provide estimates that do not agree with the observations. However, two of them provide results that are compatible with observations, when a subregion of Italy (Apulia Region) is considered. By focusing on this area, we computed a comprehensive hazard curve for a single locality in order to show the feasibility of the proposed procedure.444 100 - Some of the metrics are blocked by yourconsent settings
Item type:Publication, Access status: Open Access , Urban Disaster-Prevention Strategies Using Macroseismic Fields and Fault Sources
(2012-09-24); ; ; ; This contribution presents the general framework of the European project UPStrat-MAFA "Urban disaster Prevention Strategies using MAcroseismic Fields and FAult Sources" and its ongoing activities. A unique probabilistic procedure is being used for seismic hazard evaluation, using both macroseismic fields and characteristics of fault sources for the analysis of data from volcanic and tectonic areas: Mt. Etna, Mt. Vesuvius and Campi Flegrei (Italy), Azores Islands (Portugal), South Iceland (Iceland), Alicante-Murcia (Spain), and mainland and offshore Portugal. An improvement of urban scale vulnerability information on building and network systems (typologies, schools, strategic buildings, lifelines, and others) is proposed in the form of a global Disruption Index, with the objective to provide a systematic way of measuring earthquake impact in urbanized areas considered as complex networks. Disaster prevention strategies are considered based on an education information system, another effective component of the disaster risk reduction given by long-term activities.529 385 - Some of the metrics are blocked by yourconsent settings
Item type:Publication, Access status: Open Access , ask 6 - Gubbio - Deliverable D21: Geological model of the Gubbio basin (Italy) for the characterization of local seismic response
(2007-07); ; ; ; Within the framework of the project S3 “Ground shaking scenarios for some strategic areas in Italy-Task6” the town of Gubbio has been selected as a test site to compute ground motion taking into account finite fault and site effects. Gubbio is located in central Italy, on the northern slopes of one of the many valleys characterising the central Appennines. The historical settlement is located on a rocky slope, while new developments extend on the Quaternary fluvio-lacustrine deposits filling the basin. The Gubbio basin was chosen as a test site for a number of reasons: its geomorphological setting is very common in central and southern Italy, the area is characterised by frequent near events of moderate magnitude (Mmax 6) and large amplifications were observed there for the Colfiorito seismic sequence of the 1997/98. In order to understand the mechanisms controlling the 3D seismic response of the basin, a subsurface model has been constructed. The reconstruction of the model has been done using data coming from different surveys (figure A). Several active and passive seismic measurements have been carried out in the plain, also favoured by the intense seismic activity typical of the area. These investigations mainly consisted of monitoring activities of 4 temporary transects of seismometric stations, operating between June 2005 and May 2006 and described in detail in PS3- Deliverables D22-D23. Two transects have been positioned perpendicularly to the valley axes (GFZ and Ge2 Transects), one parallel (INGV transect) and one near Gubbio (Ge1 transect). More than 300 local and regional earthquakes have been recorded, with maximum magnitude equal to 4. A 2D array was run as well from June to September 2006, to better understand the generation of surface waves. All data are collected in a GIS (Progetto S3 Deliverable D23) Parallel to these activities, ambient noise data have been collected in the field for 90 sites, using the single station technique for the estimation of the fundamental resonance frequencies. Furthermore, 4 noise measurements with a seismic array have been collected to build an S-wave velocity profile of soft sediments, considered representative for the whole plain. The geometry of the basin below 500 m of depth has been investigated through the acquisition of an active seismic line 4.5 km long, in correspondence of one of the transects. This has been used to perform a tomography of arrival times which allowed to recognise the position and shape of the reflecting horizons. As a final step the first 30 metres of deposits have been characterised over a 30 km2 area, using both stratigraphic investigations provided by the Gubbio Municipality and data collected from in-situ surveys and lab tests. In this deliverable we describe the input data for the 3D model of the Gubbio basin and we outline the steps performed to define the geometry, the layers and their seismic properties on the base of the experimental data collected during the project and of the available geological information.302 652 - Some of the metrics are blocked by yourconsent settings
Item type:Publication, Access status: Open Access , Rheological profiles in the Central- Eastern Mediterranean
(1997-08); ; ; ;Viti, M.; Dipartimento di Scienze della Terra, Università di Siena, ItalyAlbarello, D.; Dipartimento di Scienze della Terra, Università di Siena, ItalySeismological investigations have provided an estimate of the gross structnral features of the crust/upper mantle system in the Mediterranean area. However, this information is only representative of the short-term me- chanical behaviour of rocks and cannot help us to understand slow deformations and related tectonic processes on the geological time scale. In this work strength envelopes for several major structural provinces of the Mediterranean area have been tentatively derived from seismological stratification and heat flow data, on the assumption of constant and uniforrn strain rate (10-16 S-1), wet rocks and conductive geotherm. It is also shown how the uncertainties in the reconstruction of thermal profiles can influence the main rheological prop- erties of the lithosphere, as thickness and total strength. The thickest (50-70 km) and strongest mechanical lithospheres correspond to the coldest zones (with heat flow lower than or equal to 50 mW m-2), i.e., the Io- nian and Levantine mesozoic basins, the Adriatic and Eurasian foreland zones and NW Greece. Heat flows larger than 65 mW m-2, generally observed in extensional zones (Tyrrhenian, Sicily Channel, Northern Aegean, Macedonia and Western Turkey), are mostly related to mechanical lithospheres thinner than 20 km. The characteristics of strength envelopes, and in particular the presence of soft layers in the crust, suggest a reasonable interpretation of some large-scale features which characterize the tectonic evolution of the Central- Eastem Mediterranean.179 591 - Some of the metrics are blocked by yourconsent settings
Item type:Publication, Access status: Open Access , Nubia-Eurasia kinematics: an alternative interpretation from Mediterranean and North Atlantic evidence
(2007-04-03T14:49:52Z); ; ; ; Mantovani, E.; Dipartimento di Scienze della Terra, Università degli Studi di SienaIt is argued that the Plio-Quaternary deformation pattern in the Mediterranean region is compatible with a SSW-NNE convergence between Africa (Nubia) and Eurasia and that the significant difference between this kinematics and the one provided by global models (SSE-NNW convergence, e.g., the NUVEL-1) may be due to the fact that those models interpret North Atlantic data by adopting an oversimplified two-plate configuration, which cannot account for the occurrence of significant seismotectonic activity inside the presumed Nubia and Eurasia blocks. It is shown that the adoption of a new plate configuration involving the Iberia and Morocco microplates, strongly suggested by geological and seismotectonic evidence, makes it possible to identify a kinematic model compatible within errors with the constraints recognized in the Mediterranean region and with the NUVEL-1 North Atlantic data set. Some considerations are made about the reason why the present-day Nubia-Eurasia kinematic models inferred from geodetic observations are significantly different from long-term models, such as model NUVEL-1 and the one proposed in this work.209 554 - Some of the metrics are blocked by yourconsent settings
Item type:Publication, Access status: Restricted , The Attenuation of Seismic Intensity in Italy, Part II: Modeling and Validation
(2008-04); ; ; ; Abstract Several different attenuation models have recently been proposed for the Italian region to characterize the decay of macroseismic intensity with the distance from the source. The significant scatter between these relationships and some significant drawbacks that seem to characterize previous approaches (described in a companion article by Pasolini et al., 2008) suggest that the problem needs to be reconsidered. As a first step toward more detailed analyses in the future, this study aimed at developing an isotropic attenuation relationship for the Italian area. Because this attenuation relationship has to be used primarily in probabilistic seismic hazard assessment, major attention was given to evaluating the attenuation relationship in its complete probabilistic form. Another important aspect of this study was the preliminary evaluation of the intrinsic (i.e., independent of the specific attenuation relationship to be used) scattering of data, which represents the lowest threshold for the residual variance that cannot be explained by the attenuation relationship. Furthermore, the peculiar formal features of intensity data and relevant uncertainties were considered carefully. To reduce possible biases, the completeness of the available database was checked and a suitable data selection procedure was applied. Since epicentral intensity cannot be defined unambiguously from the experimental point of view, the attenuation relationship was scaled with a new variable that is more representative of the earthquake dimension. Several criteria were considered when evaluating competing attenuation formulas (explained variance, Bayesian information criteria, Akaike information criteria, etc.). Statistical uncertainty about empirical parameters was evaluated by using standard approaches and bootstrap simulations. The performance of the selected relationship with respect to a control sample was analyzed by using a distribution-free approach. The resulting equation for the expected intensity I at a site located at epicentral distance R is I IE 0:0086 0:0005 D h 1:037 0:027 ln D ln h ; where D R2 p h2, h 3:91 0:27 km, and IE is the average expected intensity at the epicenter for a given earthquake that can be computed from the intensity data (when available) or by using empirical relationships with the moment magnitude Mw or the epicentral intensity I0 reported by the Italian seismic catalog IE 5:862 0:301 2:460 0:055 Mw; IE 0:893 0:254 1:118 0:033 I0: Comparison of the model standard deviation (S.D.) (0.69 intensity degrees) with the intrinsic one (0.62) indicates that this attenuation equation is not far from being optimal.275 43 - Some of the metrics are blocked by yourconsent settings
Item type:Publication, Access status: Open Access , The 2016 Italian seismic hazard model
(2017-01-09); ; ; ; The Italian reference seismic hazard model was released in 2004, but it has been adopted for the definition of seismic zones in 2006 and for building code only in 2009. At the beginning of 2015 the Seismic Hazard Center (CPS) of INGV was commissioned to coordinate the national scientific community with the aim of elaborating a new reference seismic hazard model, mainly finalized to the update of seismic code. The CPS designed a roadmap to release within 2 years a significantly renewed model, with regard both to the updated input elements and to the strategies to follow, in order to obtain a shared and largely accepted PSHA. The main requirements of the model were discussed in meetings with the experts on earthquake engineering. A public call was opened according to a transparent procedure; we received 24 proposals from many national institutions. The activities were organized in 6 tasks: project coordination, input data, seismicity models, ground motion prediction equations, computation and rendering, validation. In the first phase, the working groups of each task worked separately; in the second phase of the project they collaborated to release a final model. During the project, many scientific aspects were carefully considered, as in many other seismic hazard projects: the use of a declustered catalogue versus a non declustered one, the adoption of the logic-tree approach instead of an ensemble modeling, the definition of objective strategies to assign the weight to each single model, and so on.311 624 - Some of the metrics are blocked by yourconsent settings
Item type:Publication, Access status: Open Access , A scoring test on probabilistic seismic hazard estimates in Italy
(2015-01); ; ; ;Albarello, D.; Dipartimento di Scienze Fisiche, della Terra e dell’Ambiente, Università degli Studi di SienaPeruzza, L.; OGS (Istituto Nazionale di Oceanografia e di Geofisica Sperimentale), TriesteProbabilistic estimates of seismic hazard represent a basic element for seismic risk reduction strategies and they are a key element of seismic regulation. Thus, it is important to select the most effective estimates among the available ones. An empirical scoring strategy is described here and is applied to a number of time-independent hazard estimates available in Italy both at national and regional scale. The scoring test is based on the comparison of outcomes provided by available computational models at a number of accelerometric sites where observations are available for 25 years. This comparison also allows identifying computational models that, providing outcomes that are in contrast with observations, should thus be discarded. The analysis shows that most of the hazard estimates proposed for Italy are not in contrast with observations and some computational models perform significantly better than others do. Furthermore, one can see that, at least locally, older estimates can perform better than the most recent ones. Finally, since the same computational model can perform differently depending on the region considered and on average return time of concern, no single model can be considered as the best-performing one. This implies that, moving along the hazard curve, the most suitable model should be selected by considering the specific problem of concern.380 136
