Skip to main content
The search returned 27 results
Now showing 1 - 10 of 27
  • Some of the metrics are blocked by your 
    Item type:Publication, Access status: Open Access ,

    Verso una migliore conoscenza delle strutture del margine Ligure: il progetto GROSMARIN

    (English Abstract) The Ligurian margin, that is the junction area located between the Ligurian basin and the Southwestern Alps, is a passive margin, seismically active and subjected to gravitative movements. The active deformation in this sector is among the strongest ever experienced in Western Italy and Southern France. The current geodynamics of the basin is not completely understood yet, and somewhat under interest and debate of the scientific community. The latest results on the recent evolution of the Alps-Mediterranean system suggest that the area under study lay close to a domain under extension. The interest for the area is reinforced by its seismic activity that, although of low to moderate energy, acts in an area of high vulnerability. Some historical events involved in fact dramatic social and material damages. The growth of population (that now accounts for more than 2.500.000 inhabitants between Cannes and Genoa), the setting of numerous industries and the tourist business of the area are additional motivation for monitoring the area from the seismic point of view and especially to make specific studies on the seismogenic structures of this sector. Events with magnitude greater than 4.5 to 5.0 are in fact recorded every 5 years, but the area undergoes a rather weak microseismicity that often remains undetected and always poorly located by land seismic networks. The natural risks associated to this sector cannot neglect the presence of steep canyons that incise the offshore margin and favour gravitative slopes. The sediment masses accumulate on top of these canyons and may slip even after an earthquake of moderate magnitude. The GROSMARIN (which stands for GrandROSMARIN) cruise is proposed by UMR Géosciences Azur (with fellow french and italian research groups). It aims at (1) studying the microseismicity along a part of the northern margin of the Ligurian Basin, offshore France and Italy and (2) to realise a 3D tomography by wide-angle seismics. The goal is to better characterize active structures along this zone and to assess the resulting seismic hazard.
      249  383
  • Some of the metrics are blocked by your 
    Item type:Publication, Access status: Open Access ,

    30 years of seismicity in the south-western Alps and northern Apennines as recorded by the Regional Seismic Network of northwestern Italy

    The aim of this work is to describe the seismicity of the South-western Alps and Northern Apennines from the very detailed picture provided by thirty years of operation of the Regional Seismic Network of northwestern Italy .
      290  521
  • Some of the metrics are blocked by your 
    Item type:Publication, Access status: Open Access ,

    Bootstrap inversion for Pn wave velocity in North-Western Italy

    (1997-01) ; ; ;
    Parolai, S.; Dipartimento di Scienze della Terra, Sezione di Geofisica, Università di Genova, Italy
    ;
    Spallarossa, D.; Dipartimento di Scienze della Terra, Sezione di Geofisica, Università di Genova, Italy
    An inversion of Pn arrival times from regional distance earthquakes (180-800 km), recorded by 94 seismic stations operating in North-Western Italy and surrounding areas, was carried out to image lateral variations of P-wave velocity at the crust-mantle boundary, and to estimate the static delay time at each station. The reliability of the obtained results was assessed using both synthetic tests and the bootstrap Monte Carlo resampling technique. Numerical simulations demonstrated the existence of a trade-off between cell velocities and estimated station delay times along the edge of the model. Bootstrap inversions were carried out to determine the standard deviation of velocities and time terms. Low Pn velocity anomalies are detected beneath the outer side of the Alps (-6%) and the Western Po plain (-4%) in correspondence with two regions of strong crustal thickening and negative Bouguer anomaly. In contrast, high Pn velocities are imaged beneath the inner side of the Alps (+4%) indicating the presence of high velocity and density lower crust-upper mantle. The Ligurian sea shows high Pn velocities close to the Ligurian coastlines (+3%) and low Pn velocities (-1.5%) in the middle of the basin in agreement with the upper mantle velocity structure revealed by seismic refraction profiles.
      190  562
  • Some of the metrics are blocked by your 
    Item type:Publication, Access status: Open Access ,

    La definizione delle geometrie sedimentarie sepolte attraverso l’interpretazione integrata di dati geologici, geomorfologici e geofisici nella piana di Bojano (Provincia di Campobasso)

    The Bojano plain corresponds to an elongated basin with Apennine direction, delimited by the Matese massif to SW and by the Sannio hills to NE. This area was studied utilizing geologic, geomorphologic and geophysical data, acquired mainly for microzoning of the Bojano town. Seismic reflection data reveal structural depressions nearby the centre of the town and two basins filled by recent fluvial-lacustrine deposits at the NW and SE sectors of the plain, respectively. Low angle tectonic structures correlate with the thrust of the Matese chain over the frontal more deformable sequences of the Sannio units, but any high angle active structure cutting the Matese thrusts at their eastern limit and in the first 1500 m has been imaged. The seismic sections have been complemented by H/V measurements of the seismic noise utilizing a seismological network installed for sites amplification analysis with a reference station and by an accurate study of the geomorphology of the area. Analyses of the morphogenetic processes contribute to the description of the evolution of the plain and of the depocentres, with depressions and structural highs or divides which strongly influenced the rivers action and the arrival of the alluvial cones.
      180  461
  • Some of the metrics are blocked by your 
    Item type:Publication, Access status: Open Access ,

    The "O3E" program: raising awareness on natural hazards

    Earthquakes may be traumatic events and as many other environmental emergencies, like storm or floods, may cause more damages than expected when who experiences the phenomena does not know how to behave in the fall. Provided that it is always not feasible to rely on prediction when dealing with earthquakes or extreme meteorological events, preparedness proves to be an efficient (and certainly the most recommendable and cheap) way to face emergencies. Education and training are thus two ingredients to help citizens to perceive the scientific information formerly confined in the laboratories, in particular in the domain of the environmental risk. The “O3E” innovative program (European Observatory for Education and Environment) is established after 10 years (1997-2007) of regional and national original programs (“Sismos of the Schools”), and from Italian and Swiss experiences concerning environment tools for education. The project, that is a cooperation between France, Italy and Switzerland, is born to promote a responsible behaviour of citizens in front of the evolution of a society where scientific information is promptly available. ARGAL (Agency for Geological Risk in the Latin Arc) operates the administrative and technical coordination. The objective of this program is to create a school network in the Alpine and Mediterranean areas equipped with environmental sensors of an educational vocation. The data on the movement of the ground (seismometers), the temperatures and precipitations (weather stations), the flows of rivers (hydrogeology) recorded in the schools and processed by the students are collected on dedicated servers and then made available through internet to the entire educational community. This network “O3E”, once installed, is the starting point of activities. Indeed, various general objectives are pursued: - To promote the applied sciences and new technologies. - To put in network the actors of Education and formation. - To develop the sense of the autonomy and the responsibility in the young people. - To reinforce and develop relationships with regional partners of the educational and university fields. - To support a rational awakening for the prevention of the natural risks that can make the difference during the event in terms of safety. With these premises, the “O3E” experience sets up a permanent educational network of citizens in the Alpine and Mediterranean areas, building an exchange of knowledge on natural risks prevention.
      386  310
  • Some of the metrics are blocked by your 
    Item type:Publication, Access status: Restricted ,

    Improving automatic location procedure by waveform similarity analysis: An application in the South Western Alps (Italy)

    (2006) ; ; ; ;
    Massa, M.; Istituto Nazionale di Geofisica e Vulcanologia, Sezione Milano-Pavia, Milano, Italia
    The accuracy of automatic procedures for locating earthquakes is influenced by several factors such as errors in picking seismic phases, network geometry, modeling errors and velocity model uncertainties. The main purpose of this work is to improve the performances of the automatic procedure employed for the “quasi-real-time” location of seismic events in North Western Italy by developing a procedure based on a waveform similarity analysis and by using only one seismic station. To detect “earthquake families” a cross-correlation technique was applied to a data set of seismic waveforms recorded in the period 1985–2002, in a small test area (1600 km2) located in the SouthWestern Alps (Italy). Normalized cross-correlation matrices were calculated using about 2700 seismic events, selected on the basis of the signal to noise ratio, manually picked and located by using the Hypoellipse code. The waveform similarity analysis, based on the bridging technique, allowed grouping about 65% of the selected events into 80 earthquake families (multiplets) located inside the area considered. For each earthquake family a master event is selected, manually re-picked and re-located by using Hypoellipse code. Having chosen a reference station (STV) on the basis of the completeness of the available data set, an automatic procedure has been developed with the aim of cross-correlating new seismic recordings (automatically picked) to the waveforms of the events belonging to the detected families. If the new event is proved to belong to a family (on the basis of the cross-correlation values), its hypocenter co-ordinates are defined by the location of the master event of the associated family. The performance of the proposed procedure is tested and demonstrated using a data set of 104 selected earthquakes recorded in the period January 2003–June 2004 and located in the test area. The automatic procedure is able to locate, associating events with the multiplets detected by the waveform similarity analysis, about 50% of the test events, almost independently of the accuracy of the automatic phase picker and without the biasing of the network geometry and of the velocity model uncertainties.
      189  50
  • Some of the metrics are blocked by your 
    Item type:Publication, Access status: Open Access ,

    Il progetto “O3E” I rischi naturali divulgati nella scuola per produrre conoscenza e consapevolezza

    “O3E” (Observation de l’Environnement à but educatif dans les Écoles” ovvero osservazione dell'Ambiente a scopo educativo nella scuola) è un progetto transfrontaliero di educazione all’ambiente che raggruppa tre discipline (sismologia, meteorologia ed idrologia) ed è destinato agli allievi che frequentano le scuole primarie, medie ma soprattutto superiori nell’area delle Alpi latine. L'utilizzo di stazioni di misura nell'ambito delle scuole, delle attività pedagogiche “chiavi in mano”, il contatto tra scienziati ed insegnanti, un sito web che permette di visualizzare i dati “on line” ed il trasferimento transfrontaliero di conoscenze che riguardano l’educazione all’ambiente rappresentano le principali originalità del progetto “O3E”.
      449  316
  • Some of the metrics are blocked by your 
    Item type:Publication, Access status: Restricted ,

    P wave seismic velocity and Vp/Vs ratio beneath the Italian peninsula from local earthquake tomography

    (2009) ; ; ;
    Scafidi, D.; Dipteris Università di Genova
    ;
    Solarino, S.; Istituto Nazionale di Geofisica e Vulcanologia, Sezione CNT, Roma, Italia
    We investigate the P wave velocity structure and the Vp/Vs ratio beneath the Italian peninsula down to 100 and 60 km depth respectively by seismic travel time tomography. We invert data provided by the International Seismological Centre (ISC) (1997–2005), making use of some alternative strategies for the travel time approach in a well constrained and worldwide adopted code (SIMULPS). Resolution for the different layers is discussed and sensitivity analyses are performed through test inversions to explore the resolution characteristics of the model at different spatial scales. The resulting tomographic images provide a detailed sketch of the P wave anomalies, clearly showing, among the other features, the shape of the Ivrea body in the Western Alps, the upwelling of the oceanic crust in the Ligurian Sea and the slab under the Calabrian arc. They are less informative for the Vp/Vs ratio. Nevertheless, some features are very interesting and deserve further investigation like the anomalous decrease of the Vp/Vs ratio under the Ligurian Sea or the variations of the Vp/Vs ratio calculated in the first 10 km depth of the Apenninic region with respect to the lower values of the Alpine region at the same depth. The tomographic cross sections reveal a continuous superposition of two kinds of crusts (transitional over Adriatic) all along the peninsula but do not show any slab, intended as a clear, vertical downgoing high velocity material in either the northern or central Apennines.
      243  38
  • Some of the metrics are blocked by your 
    Item type:Publication, Access status: Open Access ,

    Comparison of inversion methods in seismic tomography: application to tectonic structures in Northwestern Italy

    In this paper we apply various inversion methods to a set of teleseismic data collected by a network operating along the Ligurian Belt in the transition region between Alps and Apennines. In particular, we consider the regularization method, the truncated singular value decomposition, the Landweber method (with the Related Simultaneous Iterative Reconstruction Technique) and the conjugate gradient method. All the methods provide rather similar velocity models which are well approximated by that provided by back-projection (used with an appropriate normalization constant). A drawback of these models seems to be the large discrepancy (of the order of 40%) between the observed time residuals and those computed from the model itself. However, for each station of the network, the azimuth dependence of the computed time residuals reproduces rather well the observed one so that it is believable that the most significant information contained in the data has been expIoited. The computed velocity models indicate strong heterogeneities in the first 200 km below the Apennines.
      157  344
  • Some of the metrics are blocked by your 
    Item type:Publication, Access status: Open Access ,
      173  471