Patera, Antonio
Preferred name
Patera, Antonio
Email
antonio.patera@ingv.it
Staff
staff
ORCID
36 results
Filters
Settings
The search returned 36 results
Now showing 1 - 10 of 36
- Some of the metrics are blocked by yourconsent settings
Item type:Publication, Access status: Open Access , Mapping oxygen stable isotopes of precipitation in Italy
tStudy region: Italy.Study focus: The oxygen isotope composition from 266 pluviometers was used to study thespatial variability of 18O and its relationship with Italian orography. The local meteoricwater lines (LMWLs) of northern, southern and central Italy and Sicily are reformulatedand a new definition of isotopic variations with elevation is provided.New hydrological insights for the region: Altitude and, to a lesser extent, latitude are themain geographical factors affecting the isotopic signature of precipitation in Italy. A high-resolution map of the spatial distribution of18O content in precipitation was created usingthe identified relationship between 18O/Latitude-Altitude and the spatial distribution ofthe residuals. The general features of the 18O distribution map may be summarised asfollows: 18O distribution over the Alps clearly depends on latitude and altitude, whereasover the Apennines, which run down the whole peninsula from north-west to south-east,it is more affected by altitude, the contour lines roughly following the axis of the chain. Theisotope compositions on the western side of the peninsula are generally higher than thoseof the east at the same elevation and latitude; they are more or less uniform in the northernplain of Italy.193 285 - Some of the metrics are blocked by yourconsent settings
Item type:Publication, Access status: Open Access , Surface ruptures following the 30 October 2016 Mw 6.5 Norcia earthquake, central Italy
We present a 1:25,000 scale map of the coseismic surface ruptures following the 30 October 2016 M-w 6.5 Norcia normal-faulting earthquake, central Italy. Detailed rupture mapping is based on almost 11,000 oblique photographs taken from helicopter flights, that has been verified and integrated with field data (>7000 measurements). Thanks to the common efforts of the Open EMERGEO Working Group (130 people, 25 research institutions and universities from Europe), we were able to document a complex surface faulting pattern with a dominant strike of N135 degrees-160 degrees (SW-dipping) and a subordinate strike of N320 degrees-345 degrees (NE-dipping) along about 28km of the active Mt. Vettore-Mt. Bove fault system. Geometric and kinematic characteristics of the rupture were observed and recorded along closely spaced, parallel or subparallel, overlapping or step-like synthetic and antithetic fault splays of the activated fault systems, comprising a total surface rupture length of approximately 46km when all ruptures were considered.6034 218 - Some of the metrics are blocked by yourconsent settings
Item type:Publication, Access status: Open Access , Spatial Uncertainty of Target Patterns Generated by Different Prediction Models of Landslide Susceptibility
his contribution exposes the relative uncertainties associated with prediction patterns of landslide susceptibility. The patterns are based on relationships between direct and indirect spatial evidence of landslide occurrences. In a spatial database constructed for the modeling, direct evidence is the presence of landslide trigger areas, while indirect evidence is the presence of corresponding multivariate context in the form of digital maps. Five mathematical modeling functions are applied to capture and integrate evidence, indirect and direct, for separating landslide-presence areas from the areas of landslide assumed absence. Empirical likelihood ratios are used first to represent the spatial relationships. These are then combined by the models into prediction scores, ordered, equal-area ranked, displayed, and synthesized as prediction-rate curves. A critical task is assessing how uncertainty levels vary across the different prediction patterns, i.e., the modeling results visualized as fixed, colored groups of ranks. This is obtained by a strategy of iterative cross validation that uses only part of the direct evidence to model the pattern and the rest to validate it as a predictor. The conducted experiments in a mountainous area in northern Italy point at a research challenge that can now be confronted with relative rank-based statistics and iterative cross-validation processes. The uncertainty properties of prediction patterns are mostly unknown nevertheless they are critical for interpreting and justifying prediction results.64 82 - Some of the metrics are blocked by yourconsent settings
Item type:Publication, Access status: Open Access , Long-term expression of the Paganica Fault vs. 2009 L’Aquila Earthquake surface ruptures: looking for a better understanding of its seismic behavior
(2010-05); ; ; ; The Mw6.3, April 6, 2009 earthquake occurred on the previously identified Paganica normal fault and produced a 3 km-long co-seismic surface rupture along its northern section, with few centimeters of vertical displacement. Extensive 1:10,000-scale geological and geomorphological mapping has been carried out, focusing on the characterization of the long-term expression of the Paganica Fault at the surface. The field mapping was integrated by observations, made on 1:33,000 scale aerial photographs (GAI), 5-m-resolution Digital Elevation Model and standard morphometric derivatives (hill-shaded and slope angle maps, Spatial Analyst™). Particular attention was devoted to the study of the continental deposits and landforms affected by cumulative offset with the aim to reconstruct the Quaternary deformational history of the fault. The fault runs for a total length of 20 km and, along with antithetic faults on its hanging-wall, forms the graben of the Middle Aterno River Valley. The whole fault system and the variable setting of deformation affecting the continental deposits at the surface were identified. The Paganica long-term morphologic signature is represented by a set of prominent scarps formed by the tectonic juxtaposition of late Pliocene-middle Pleistocene and late Pleistocene alluvial deposits, and by lower scarps in late Pleistocene-Holocene deposits. In addition, evident Quaternary erosional and depositional paleosurfaces were recognized and sampled for 14C and OSL (Optically Stimulated Luminescence) and tephra chronology dating for long-term slip-rate calculations. This study resulted helpful to locate four paleoseismological investigations (see Pantosti et al. talk) and to provide the appropriate context for correctly interpret the depositional bodies outcropping on the trench walls. These paleoseismological investigations evidenced the presence of repeated late Pleistocene-Holocene activity and allowed for slip-rate estimation at a shorter time-scale. Such estimates were valuable for a comparison with the preliminary estimates on late Pleistocene calculations carried out by geomorphological investigations. Moreover, we correlated co-seismic deformations with the long-term morphologies and structures. The 2009 co-seismic ruptures show a general coherence with the long-term Paganica fault trace, both in terms of location and style. However, the limited extent of the 2009 surface ruptures coincides with the portion of the fault trace where deformation is more localized and few splays contribute to the extension. This is also testified by the presence on its hanging-wall of a large late Pleistocene-Holocene alluvial fan that subsides over the basin depocenter. Conversely, where the Paganica fault system branches out, various splays accommodated the small 2009 co-seismic throw, resulting in a distributed and not evident extensional strain. The preserved fault-related geomorphology is evidence for the persistence of the rupture complexities during Quaternary. On this light, further studies on the style of fault activity are needed to estimate if the Paganica fault is capable of earthquakes with Magnitude larger than the 2009 event.260 297 - Some of the metrics are blocked by yourconsent settings
Item type:Publication, Access status: Open Access , Modelling aquifer vulnerability to nitrates under the assumption of varying spatial support of water well distribution
This contribution analyses the spatial support of sampling points used to express the presence or absence of NO3 ˉ pollution in the water table. A spatial database constructed for the assessment of ground water vulnerability is re-analysed with a different predictive strategy. In practice, a case study area surrounding the city of Milan in northern Italy becomes an opportunity to point at a very general prediction modelling problem in which the basic direct evidence of a process is obtained only by sampling with point like measurements of nitrate concentration, as the ones from drill holes or water wells. The main questions are: “What is the functional spatial support for the modelling?” and “What happens if different spatial supports are assumed?” The answers to these questions are counterintuitive. Over the area of study of about 2,000 km2 , the distribution of 305 water wells delimits a training area in which 133 wells are considered as impacted by nitrate pollution, i.e., direct supporting patterns of the modelling. The remaining 172 wells are considered as non-impacted. In the training area, nine natural and anthropogenic map data are assumed, as indirect supporting patterns of the modelling, to reflect both the potential source of nitrates and the relative ease in which nitrates may migrate in ground water. They cover the entire area of study. A mathematical model is used that computes spatial relationships between the direct and indirect supporting patterns based on empirical likelihood ratios. The relationships are integrated into prediction patterns and, by iterative cross-validations, into target and uncertainty patterns. These are then extended from the training area over the remaining much larger study areas for analysis and visualization. Square neighbourhoods of dimensions 20 × 20 m, 60 × 60 m, 180 × 180 m and 1,020 × 1,020 m around the 305 wells are used to delimit four training areas of different sizes. Surprisingly, the smaller spatial support appears as the most reliable.44 102 - Some of the metrics are blocked by yourconsent settings
Item type:Publication, Access status: Open Access , Rilievi geologici nell’area epicentrale della sequenza sismica dell’Aquilano del 6 aprile 2009
(2009-06) ;EMERGEO Working Group, .; ; ; Il 6 Aprile 2009 un terremoto di Ml=5.8 (Mw=6.2) ha colpito L’Aquila e la media valle dell’Aterno in Abruzzo. In questo lavoro presentiamo in maniera sintetica i rilievi geologici effettuati in campagna dal gruppo di lavoro EmerGeo a seguito della sequenza sismica aquilana. Le attività di rilevamento condotte sono consistite principalmente nella verifica, definizione e caratterizzazione delle deformazioni cosismiche superficiali osservate lungo le strutture tettoniche note in letteratura; sono stati inoltre rilevati e riportati altri effetti cosismici locali (fratture su asfalto, frane e scivolamenti) non direttamente collegati alla presenza di strutture tettoniche. In totale sono stati rilevati oltre 300 punti di osservazione su una porzione di territorio estesa circa 900 km2. L’analisi preliminare dei rilievi effettuati indica che le rotture osservate lungo la faglia di Paganica, per la continuità e le caratteristiche, rappresentano l’espressione superficiale della faglia responsabile dell’evento del 6 aprile 2009, e che le rotture lungo le faglie di Bazzano e di Monticchio-Fossa possono rappresentare l’espressione in superficie di una struttura antitetica riattivata durante l’evento.1373 571 - Some of the metrics are blocked by yourconsent settings
Item type:Publication, Access status: Open Access , Geothecnical modelling of the subsoil of Rome (Italy) by means of multivariate geostatistics
(2006-09-03); ; ; ; A research project was carried out by the C.N.R. to develop an integrated geological-geotechnical model of the subsoil of Rome. Data of more than 6000 boreholes were archived in a GIS and used to develop the geological model; the results presented in this work mainly focused on the upper Pleistocene-Holocene alluvial deposits. Information of more than 2000 boreholes penetrating the alluvial deposits was encoded and elaborated using geostatistics to model the sedimentary bodies. Spatial variability of the physical and mechanical properties was also investigated to develop the geotechnical model. Multiple linear regression, kriging, and cokriging were applied to estimate the drained friction angle φ’; cross-validation demonstrates the cokriging with the PCA factors as auxiliary variables being the most suitable method. In progress work on cokriging of φ’ using granulometries as auxiliary variables demonstrates this approach to be viable for future applications.218 417 - Some of the metrics are blocked by yourconsent settings
Item type:Product, Access status: Open Access , 126 194 - Some of the metrics are blocked by yourconsent settings
Item type:Publication, Access status: Restricted , Evidence for surface rupture associated with the Mw 6.3 L’Aquila earthquake sequence of April 2009 (central Italy)
(2010-02) ;EMERGEO Working Group, .; ; ; An earthquake of Mw = 6.3 struck L Aquila town (central Italy) on 6 April 2009 rupturing an ~18-km-long SW-dipping normal fault. The aftershock area extended for a length of more than 35 km and included major aftershocks on 7 and 9 April and thousands of minor events. Surface faulting occurred along the SW-dipping Paganica fault with a continuous extent of ~2.5 km. Ruptures consist of open cracks and vertical dislocations or warps (0.1m maximum throw) with an orientation of N130°–140°. Small triggered slip and shaking effects also took place along nearby synthetic and antithetic normal faults. The observed limited extent and small surface displacement of the Paganica ruptures with respect to the height of the fault scarps and vertical throws of palaeo-earthquakes along faults in the area put the faulting associated with the L' Aquila earthquake in perspective with respect to the maximum expected magnitude and the regional seismic hazard.1425 234 - Some of the metrics are blocked by yourconsent settings
Item type:Publication, Access status: Open Access , Liquefaction phenomena associated with the Emilia earthquake sequence of May-June 2012 (Northern Italy)
(2013) ;Emergeo, Working Group; ; ; In this paper we present the geological effects induced by the 2012 Emilia seismic sequence in the Po plain. Extensive liquefaction phenomena were observed over an area of ~1200 km2 following the May 20, Ml 5.9 and May 29, Ml 5.8 mainshocks, both occurred on about E-W trending, S dipping blind thrust faults. We collected the coseismic geological evidence through field and aerial surveys, reports from local people and web-based survey. On the basis of their morphologic and structural characteristics we grouped the 1362 effects surveyed into three main categories: liquefaction (485), fractures with liquefaction (768), fractures (109). We show that the quite uneven distribution of liquefaction effects, that appear concentrated and aligned, is mostly controlled by the presence of paleo-river beds, out-flow channels and fans of the main rivers crossing the area; these terrains are characterized by the pervasive presence of sandy layers in the uppermost 5 m, a local feature that, along with the presence of a high water table, greatly favours liquefaction. We also find that the maximum distance of observed liquefaction from the earthquake epicentre is ~30 km, in agreement with the regional empirical relations available for the Italian Peninsula. Finally, we observe that the contour of the liquefaction observations has an elongated shape almost coinciding with the aftershock area, the InSAR deformation area, and the I≥6 EMS area. This observation confirms the control of the earthquake source on the liquefaction distribution, and provides useful hints in the perspective of the characterization of the seismogenic source responsible for historical and pre-historical liquefactions.1792 745
