Skip to main content
The search returned 20 results
Now showing 1 - 10 of 20
  • Some of the metrics are blocked by your 
    Item type:Publication, Access status: Open Access ,

    Pulsed dike emplacement and lava tube formation during the 1971 Etna eruption

    (Lausann : Frontiers Media S.A., 2013-, 2026-09-16) ;
    Self, Stephen
    ;
    Messina, Danilo
    ;
    ;
    The Serracozzo cave, formed during Mount Etna’s 1971 flank eruption, offers a rare insight into feeder dike dynamics and lava transport. This bipartite cavity comprises an upper section within an eruptive fissure and a lower portion developed in a confined arterial ‘a‘ā lava flow. The processes of emplacement and growth of these structures are rarely treated in the volcanological literature through direct field-survey-observations due to the difficulty of exploring and accessing these environments. Here we combined historical imagery, geological field surveys and high-resolution digital modeling via terrestrial laser scanning and drone photogrammetry to reconstruct the cave’s morphological evolution. Our analysis reveals a pulsating dike emplacement characterized by alternating cycles of magmatic pressure buildup and release, driving both upward and downslope propagation. The morphology of the fissure exhibits distinctive pinch-and-swell geometry, while surface vents acted as pressure-release valves, producing localized pāhoehoe overflows and skylights. We have estimated the volume of the whole cavity at ∼ 1270 m3, which compared to that of the proximal host lava, makes the cavity just 6.2% of the flow. These findings for the first time ever quantify the cave to flow ratio, describe the dynamic emplacement of the feeder dike, enhance understanding of fissure-fed lava systems, and provide valuable constraints on the timing and processes of lava tube formation, contributing to improved volcanic hazard assessments and mitigation at Etna and analogous basaltic volcanoes worldwide.
      4  14
  • Some of the metrics are blocked by your 
    Item type:Publication, Access status: Open Access ,

    Integrated Monitoring of Soil Radon Gas and Seismic Activity to Detect Volcanic Unrest at Mount Etna (Italy), 2023-2025

    (MDPI Switzerland, 2026-02-10) ; ; ; ;
    This work presents the results of an integrated monitoring of soil radon gas and seismic activity at Mt. Etna from August 2023 to May 2025, aimed at enhancing comprehension of magma migration and eruption dynamics. Radon data were collected using a permanent station with an alpha particle probe, aggregated hourly. The INGV-OE network monitored seismic activity at 100 Hz; volcanic tremor was analyzed using Root-Mean-Square (RMS) values from the Serra La Nave station. Earthquakes were located using the Hypoellipse algorithm and a 1D crustal velocity model. A robust correlation was found between radon and RMS anomalies, with the former preceding the latter with increasing probability over time (e.g., 30.1% within 1 day, 46.4% within 3 days). Correlations were also found between radon anomalies and Strombolian activity at the summit craters (e.g., 23.8% within 1 day for the Central Crater), suggesting a potential predictive role for radon. Conversely, correlations with paroxysmal events were weaker in the short term but increased over longer time windows. No clear correlation was found between radon anomalies and seismic strain release, likely due to differing temporal resolutions. These results support the idea that radon plays a role as a short-term precursor in volcanic unrest.
      27  31
  • Some of the metrics are blocked by your 
    Item type:Publication, Access status: Open Access ,

    The February–April 2021 sequence of lava fountain paroxysms on Mt Etna: source mechanism deciphered from ground-based and satellite survey of volcanic gas emissions

    (Berlin; Heidelberg; New York N.Y.: Springer, 2025-10-07) ; ; ; ;
    Between 16 February and 1 April 2021, the Southeast Crater (SEC) of Mt Etna produced a spectacular sequence of 17 lava fountain paroxysms, separated by 2.5 days on average, which generated ≥ 10 km high eruptive columns and heavy tephra fallout over populated surroundings. We examine the magmatic processes responsible for these events based on pre- and syn-eruptive data for the mass flux and chemistry of Etna gas emissions, surveyed both from the ground (scanning DOAS, OP-FTIR spectroscopy) and from space (TROPOMI, SEVIRI), and comparing with the seismic tremor. Bulk plume SO2 emission rates determined from the ground and from space are consistent with one another. We show that after several months of background summit activity, sustained since June 2020 by open-system degassing of ~ 29 × 106 m3 (DRE) of magma through the central volcano conduits, an influx of deeply derived primitive magma led to a pressure build-up phase from early December 2020 to 13 February 2021, marked by a rapid increase in the SO2 flux and tremor (the former interpreted to represent an ~ 3 times higher magma degassing rate) and decreasing SO2/HCl plume ratio. A series of 17 lava fountains began immediately after a shallow seismic cluster and a sharp drop in the SO2 emission rate from the summit craters, reflecting the lateral transfer of pressurized primitive magma to beneath the SEC. The fountain paroxysms were characterized by sharp increases in tremor amplitude, intense SO2 release, and higher volcanic gas SO2/HCl ratios. The magnitude of SO2 emission rate correlates with the proportion of primitive magma in co-erupted products during the first half of the sequence. The estimated total gas discharge, compared to the co-erupted tephra mass, suggests a large excess gas release for most events, which is proportional to the length of the repose interval. Combining these observations with models of S and Cl degassing from Etna trachybasalt, we infer that the February–April 2021 lava fountain series resulted from the recurrent accumulation of H2O- CO2-rich bubble foams at ~ 2–3 km depth beneath SEC, whose periodic collapse promoted fast magma ascent and fragmentation associated with essentially syn-eruptive degassing of S and Cl. Our study thus provides further insight into the complexity of magmatic processes determining lava fountain paroxysms at Mt Etna and, possibly, other basaltic volcanoes.
      15  23
  • Some of the metrics are blocked by your 
    Item type:Publication, Access status: Open Access ,

    Complex lava tube networks developed within the 1792–93 lava flow field on Mount Etna (Italy): insights for hazard assessment

    (2024-09-18) ; ; ;
    Messina, Danilo
    ;
    Lava tubes are powerful heat insulators, allowing lava to practically keep the initial temperature and travel longer distances than when freely flowing on the ground surface. It is thus extremely important to recognize how, when and where these structures form within a lava flow field for hazard assessment purposes, in order to plan possible interventions should a lava flow approach inhabited areas. Often being formed within thick and complex lava flow fields, lava tubes are difficult to detect, study and explore. In this study, we analyse the 1792–93 Etna lava flow field emplaced on a steep slope (&amp;gt;4°) which comprises several lava tubes located at different distances from the eruptive fissure, at different levels within the lava flow field, and showing various inner morphologies, with peculiar inner features related to their maturity and eruptive history. Our aim is to verify whether it is possible to connect the underground features with features observed on the lava flow surface in order to reconstruct the extension of the tube network and unravel the genetic processes. Our results show that, in the studied lava flow field, a clear correspondence is possible between shallow tubes emplaced late during the lava flow field growth and surface textures. In addition, vertical and horizontal tube capture is very widespread, and might be the primary process for lava tube persistence and long life. Our results might be applicable to other lava tubes on Earth and other rocky planets.</jats:p>
      22  94
  • Some of the metrics are blocked by your 
    Item type:Publication, Access status: Open Access ,

    Tracing Magma Migration at Mt. Etna Volcano during 2006–2020, Coupling Remote Sensing of Crater Gas Emissions and Ground Measurement of Soil Gases

    The geochemical monitoring of volcanic activity today relies largely on remote sensing, but the combination of this approach together with soil gas monitoring, using the appropriate parameters, is still not widely used. The main purpose of this study was to correlate data from crater gas emissions with flank emissions of soil gases at Mt. Etna volcano from June 2006 to December 2020. Crater SO2 fluxes were measured from fixed stations around the volcano using the DOAS technique and applying a modeled clear-sky spectrum. The SO2/HCl ratio in the crater plume was measured with the OP-FTIR technique from a transportable instrument, using the sun as an IR source. Soil CO2 efflux coupled with the 220Rn/222Rn activity ratio in soil gases (named SGDI) were measured at a fixed monitoring site on the east flank of Etna. All signals acquired were subject both to spectral analysis and to filtering of the periodic signals discovered. All filtered signals revealed changes that were nicely correlated both with other geophysical signals and with volcanic eruptions during the study period. Time lags between parameters were explained in terms of different modes of magma migration and storage inside the volcano before eruptions. A comprehensive dynamic degassing model is presented that allows for a better understanding of magma dynamics in an open-conduit volcano.
      180  148
  • Some of the metrics are blocked by your 
    Item type:Publication, Access status: Open Access ,

    A Multi-Parametric and Multi-Layer Study to Investigate the Largest 2022 Hunga Tonga–Hunga Ha’apai Eruptions

    On 20 December 2021, after six quiet years, the Hunga Tonga–Hunga Ha’apai volcano erupted abruptly. Then, on 15 January 2022, the largest eruption produced a plume well registered from satellites and destroyed the volcanic cone previously formed in 2015, connecting the two islands. We applied a multi-parametric and multi-layer study to investigate all the possible preeruption signals and effects of this volcanic activity in the lithosphere, atmosphere, and ionosphere. We focused our attention on: (a) seismological features considering the eruption in terms of an earthquake with equivalent energy released in the lithosphere; (b) atmospheric parameters, such as skin and air temperature, outgoing longwave radiation (OLR), cloud cover, relative humidity from climatological datasets; (c) varying magnetic field and electron density observed by ground magnetometers and satellites, even if the event was in the recovery phase of an intense geomagnetic storm. We found different precursors of this unique event in the lithosphere, as well as the effects due to the propagation of acoustic gravity and pressure waves and magnetic and electromagnetic coupling in the form of signals detected by ground stations and satellite data. All these parameters and their detailed investigation confirm the lithosphere–atmosphere–ionosphere coupling (LAIC) models introduced for natural hazards such as volcano eruptions and earthquakes.
      539  128
  • Some of the metrics are blocked by your 
    Item type:Publication, Access status: Restricted ,

    The 15 January 2022 Event at Hunga Tonga-Hunga Ha'apai, Recorded by Multiparametric Stations in Italy

    The eruption of the volcano Hunga Tonga-Hunga Ha‘apai on Jan 15, 2022, 04:14:54 UTC, was such energetic that instruments observed different physical phenomena all over the globe. In Italy, the Istituto Nazionale di Geofisica e Vulcanologia (INGV), who is continuously operating different kinds of monitoring networks, as e.g., the Italian Seismic Network (ISN), micro-barometric and infrasonic stations for monitoring the active volcanoes, ionospheric monitoring network (GNSS and ionosonde), recorded seismic, acoustic and electromagnetic signals originated by this exceptional event. The blast wave generated by the volcanic explosion of Hunga Tunga was recorded by the micro-barometric and infrasound stations installed at Phlegrean Fields (PF), at Stromboli volcano and on Mt. Etna. The first arrival was recorded at ~20:00 UTC, after travelling along the “short” great circle (17600 km), was succeeded by a second onset, about 3:40 h later, arriving at PF from the opposite direction. The mean propagation velocity in both directions was calculated as 310 m/s. The stations of the Etna Radio Observatory (ERO) are also equipped with micro-barometers, measuring the atmospheric pressure at a sampling rate of 5 min. The first group of atmospheric shock waves was recorded in the evening of Jan 15, 2022, while 36 hours later the ERO-stations observed a second signal after having completed the second orbit. The magnitude of M5.7 of the Hunga Tonga eruption was strong enough to record core phases (PKIKP, PKP), surface reflection of mantle phases (PP, SS), as well as Rayleigh and Love waves, at many stations of the ISN. The atmospheric waves generated by the eruption generated Travelling Ionospheric Disturbances in the ionosphere detected as disturbances in the Total Electron Content calculated by using GNSS data acquired by the GNSS network of INGV and variations of the ionospheric peak layer parameters (foF2, hmF2), recorded by the ionosonde installed on the Italian territory by INGV.
      102  8
  • Some of the metrics are blocked by your 
    Item type:Publication, Access status: Open Access ,

    Evidence of Tectonic Control on the Geochemical Features of the Volatiles Vented along the Nebrodi-Peloritani Mts (Southern Apennine Chain, Italy)

    Investigations carried out over the southernmost portion of the Apennine chain (Nebrodi-Peloritani Mountains, Sicily, Italy) reveal a close connection between the tectonic setting and the regional degassing of CO2-dominated volatiles. The geochemical features of the collected gases show that the pristine composition has been modified by gas-water interaction (GWI) and degassing processes. The 3He/4He isotopic ratio in the range of 0.7-2.8 Ra highlights variable contributions of mantle-derived helium, representing an unusual feature for the crustal regime of the study areas characterized by the widespread presence of 4He-producer metamorphic rocks. The degassing of mantle helium is coherent with the tectonics and related to the NW-SE extensional regime of the Calabro-Peloritan Arc (CPA). We propose that the degassing regime as well as the geochemical features of both the dissolved and bubbling gases is closely connected to the strain accumulation rate, inducing almost no temporal changes and insignificant deep-originated fluid contributions to the locked fault volumes. Investigations including discrete and continuous monitoring and degassing-rate estimations are useful tools to gain a better insight into the evolution of seismogenesis, considering the fault rupture as the final stage of a seismic cycle.
      686  45
  • Some of the metrics are blocked by your 
    Item type:Publication, Access status: Restricted ,

    May engineering activities located in Sicily (Southern Italy) "potentially" induce seismicity?

    (Società Geologica Italiana, 2016-09-07) ; ; ; ;
    Earthquakes caused by human engineering activities are commonly termed as “triggered” or “induced”. This class of earthquakes, though characterized by low-to-moderate magnitude, have significant social and economical implications since they occur close to the engineering activity responsible for triggering/inducing them and can be felt by the inhabitants living nearby, and may even produce damage. One of the first well-documented examples of induced seismicity was observed in 1932 in Algeria, when a shallow magnitude 3.0 earthquake occurred close to the Oued Fodda Dam (Gupta, 1985). By the continuous global improvement of seismic monitoring networks, numerous other examples of human-induced earthquakes have been identified (see Davies et al., 2013 for an overview). Induced earthquakes occur at shallow depths and are related to a number of human activities, such as fluid injection under high pressure (e.g. waste-water disposal in deep wells, hydrofracturing activities in enhanced geothermal systems and oil recovery, shale-gas fracking, natural and CO2 gas storage), hydrocarbon exploitation, groundwater extraction, deep underground mining, large water impoundments and underground nuclear tests (Davies et al., 2013). Despite the presence in the Sicilian territory of a large amount of engineering activities “potentially capable” of inducing seismicity, no extensive researches on this topic have been conducted to date. Hence, in order to improve our knowledge, and correctly assess the hazard at a specific location in the future, we started a preliminary study on the main engineering activities located on- and off-shore of Sicily (Southern Italy). To this end, in a first step we collected all the useful information coming from available on-line national and regional catalogues. The compiled database includes 46 dams, 598 quarries and 839 oil and gas wells for a total of 1483 engineering activities. Among these, 175 are located along the southern Sicilian coastal off-shore while the remaining 1308 are located inland. As a second step, we performed a detailed compilation of instrumental seismicity striking the investigated area. Continuous seismic monitoring of the whole Italian territory started in the 90s and is currently performed by the National Seismic Network managed by the Istituto Nazionale di Geofisica e Vulcanologia (INGV). In addition, monitoring and systematic analysis of seismic activity in eastern Sicily, by means of a dense local network, is performed also by the “Osservatorio Etneo” (INGV-OE), an INGV-branch located in Catania, close to Mt. Etna. Since 1983, earthquakes occurred in the entire Italian territory have been analysed and archived in the catalogue managed by the INGV headquarters in Rome (INGV-CNT; Castello et al., 2005; ISIDe Working Group - INGV, 2010), while since 1999, earthquakes occurred in eastern Sicily have been analysed and archived in the database of the INGV-OE (Alparone et al., 2009; Gruppo Analisi Dati Sismici, 2016). Because the INGV-OE catalogue covers with great details only the eastern sector of Sicily, while the INGV-CNT catalogues, extends back in time since 1983, in order to identify possible prospective effects of the human activities on the seismicity, here we took into account both catalogues. We considered only the seismicity occurred within the first 10 km of the crust because the induced seismicity should be likely confined in the shallower crust. As a final step, in order to identify prospective effects of the human activities on the seismicity, we investigated the spatio-temporal relationships between engineering activities and earthquakes, by adopting a statistic approach aimed to the detection of anomalous seismicity densities. Finally, we identified 46 engineering activities (2 dams, 16 wells and 28 quarries) characterized by anomalous seismicity density. These activities are mainly located in Western Sicily and on the eastern sector of the Hyblean Plateau, while a few number of activities are locate in northern Sicily and on the Island of Vulcano. Currently, we are performing detailed analyses on the nature of the observed seismicity activity in proximity of these engineering activities.
      190  14
  • Some of the metrics are blocked by your 
    Item type:Publication, Access status: Open Access ,

    A preliminary census of engineering activities located in Sicily (Southern Italy) which may “potentially” induce seismicity

    The seismic events caused by human engineering activities are commonly termed as “triggered” and “induced”. This class of earthquakes, though characterized by low-to-moderate magnitude, have significant social and eco- nomical implications since they occur close to the engineering activity responsible for triggering/inducing them and can be felt by the inhabitants living nearby, and may even produce damage. One of the first well-documented examples of induced seismicity was observed in 1932 in Algeria, when a shallow magnitude 3.0 earthquake occurred close to the Oued Fodda Dam. By the continuous global improvement of seismic monitoring networks, numerous other examples of human-induced earthquakes have been identified. Induced earthquakes occur at shallow depths and are related to a number of human activities, such as fluid injection under high pressure (e.g. waste-water disposal in deep wells, hydrofracturing activities in enhanced geothermal systems and oil recovery, shale-gas fracking, natural and CO2 gas storage), hydrocarbon exploitation, groundwater extraction, deep underground mining, large water impoundments and underground nuclear tests. In Italy, induced/triggered seismicity is suspected to have contributed to the disaster of the Vajont dam in 1963. Despite this suspected case and the presence in the Italian territory of a large amount of engineering activities “capable” of inducing seismicity, no extensive researches on this topic have been conducted to date. Hence, in order to improve knowledge and correctly assess the potential hazard at a specific location in the future, here we started a preliminary study on the entire range of engineering activities currently located in Sicily (Southern Italy) which may “potentially” induce seismicity. To this end, we performed: • a preliminary census of all engineering activities located in the study area by collecting all the useful information coming from available on-line catalogues; • a detailed compilation of instrumental and historical seismicity, focal mechanisms solutions, multidisciplinary stress indicators, GPS-based ground deformation field, mapped faults, etc by merging data from on-line catalogues with those reported in literature. Finally, for each individual site, we analysed: i) long-term statistic behaviour of instrumental seismicity (mag- nitude of completeness, seismic release above a threshold magnitude, depth distribution, focal plane solutions); ii) long-term statistic behaviour of historical seismicity (maximum magnitude estimation, recurrence time inter- val, etc); iii) properties and orientation of faults (length, estimated geological slip, kinematics, etc); iv) regional stress (from borehole, seismological and geological observations) and strain (from GPS-based observations) fields.
      242  284