Herrero, André
Preferred name
Herrero, André
Email
andre.herrero@ingv.it
Staff
staff
ORCID
Scopus Author ID
7102915258
44 risultati
Filtri
Impostazioni
The search returned 44 results
Ora in mostra 1 - 10 di 44
- Some of the metrics are blocked by yourconsent settings
Tipo di elemento:Pubblicazione, Access status: Open Access , Seismic monitoring using the telecom fiber network
Laser interferometry enables to remotely measure microscopical length changes of deployedtelecommunication cables originating from earthquakes. Long reach and compatibility with datatransmission make it attractive for the exploration of both remote regions and highly-populated areaswhere optical networks are pervasive. However, interpretation of its response still suffers from a limitednumber of available datasets. We systematically analyze 1.5 years of acquisitions on a land-basedtelecommunication cable in comparison to co-located seismometers, with successful detection ofevents in a broad magnitude range, including very weak ones. We determine relations between acable’s detection probability and the events magnitude and distance, introducing spectral analysis offiber data as a tool to investigate earthquake dynamics. Our results reveal that quantitative analysis ispossible, confirming applicability of this technique both for the global monitoring of our planet and thedaily seismicity monitoring of populated areas, in perspective exploitable for civilian protection79 86 - Some of the metrics are blocked by yourconsent settings
Tipo di elemento:Pubblicazione, Access status: Open Access , The Making of the NEAM Tsunami Hazard Model 2018 (NEAMTHM18)
(2021-03-05); ; ; ; The NEAM Tsunami Hazard Model 2018 (NEAMTHM18) is a probabilistic hazard model for tsunamis generated by earthquakes. It covers the coastlines of the North-eastern Atlantic, the Mediterranean, and connected seas (NEAM). NEAMTHM18 was designed as a three-phase project. The first two phases were dedicated to the model development and hazard calculations, following a formalized decision-making process based on a multiple-expert protocol. The third phase was dedicated to documentation and dissemination. The hazard assessment workflow was structured in Steps and Levels. There are four Steps: Step-1) probabilistic earthquake model; Step-2) tsunami generation and modeling in deep water; Step-3) shoaling and inundation; Step-4) hazard aggregation and uncertainty quantification. Each Step includes a different number of Levels. Level-0 always describes the input data; the other Levels describe the intermediate results needed to proceed from one Step to another. Alternative datasets and models were considered in the implementation. The epistemic hazard uncertainty was quantified through an ensemble modeling technique accounting for alternative models’ weights and yielding a distribution of hazard curves represented by the mean and various percentiles. Hazard curves were calculated at 2,343 Points of Interest (POI) distributed at an average spacing of ∼20 km. Precalculated probability maps for five maximum inundation heights (MIH) and hazard intensity maps for five average return periods (ARP) were produced from hazard curves. In the entire NEAM Region, MIHs of several meters are rare but not impossible. Considering a 2% probability of exceedance in 50 years (ARP≈2,475 years), the POIs with MIH >5 m are fewer than 1% and are all in the Mediterranean on Libya, Egypt, Cyprus, and Greece coasts. In the North-East Atlantic, POIs with MIH >3 m are on the coasts of Mauritania and Gulf of Cadiz. Overall, 30% of the POIs have MIH >1 m. NEAMTHM18 results and documentation are available through the TSUMAPS-NEAM project website (http://www.tsumaps-neam.eu/), featuring an interactive web mapper. Although the NEAMTHM18 cannot substitute in-depth analyses at local scales, it represents the first action to start local and more detailed hazard and risk assessments and contributes to designing evacuation maps for tsunami early warning.1499 280 - Some of the metrics are blocked by yourconsent settings
Tipo di elemento:Pubblicazione, Access status: Limitato , From Seismic Monitoring to Tsunami Warning in the Mediterranean Sea
The Italian Tsunami Alert Center based at the Istituto Nazionale di Geofisica e Vulcanologia (CAT-INGV) has been monitoring the Mediterranean seismicity in the past 8 yr to get fast and reliable information for seismically induced tsunami warnings. CAT-INGV is a tsunami service provider in charge of monitoring the seismicity of the Mediterranean Sea and of alerting Intergovernmental Oceanographic Commission (IOC)/UNESCO subscriber Member States and the Italian Department of Civil Protection of a potentially impending tsunami, in the framework of the Tsunami Warning and Mitigation System in the North-eastern Atlantic, the Mediterranean and connected seas (NEAMTWS). CAT-INGV started operating in 2013 and became operational in October 2016. Here, after describing the NEAMTWS in the framework of the global effort coordinated by IOC/UNESCO, we focus on the tsunami hazard in the Mediterranean Sea. We then describe CAT-INGV mandate, functioning, and operational procedures. Furthermore, the article discusses the lessons learned from past events occurring in the Mediterranean Sea, such as the Kos-Bodrum in 2017 (Mw 6.6) and the Samos-Izmir in 2020 (Mw 7.0) earthquakes, which generated moderately damaging tsunamis. Based on these lessons, we discuss some potential improvements for the CAT-INGV and the NEAMTWS, including better seismic and sea level instrumental cover- age. We emphasize the need for tsunami risk awareness raising, better preparation, and full implementation of the tsunami warning “last-mile” to foster the creation of a more integrated, interoperable, and sustainable risk reduction framework. If we aim to be better prepared for the next tsunami, these important challenges should be prioritized in the agenda of the IOC/UNESCO Member States and the European Commission.1254 2 - Some of the metrics are blocked by yourconsent settings
Tipo di elemento:Pubblicazione, Access status: Open Access , Broad-band ground-motion simulation of 2016 Amatrice earthquake, Central Italy
On 24 August 2016 at 01:36 UTC a ML6.0 earthquake struck several villages in central Italy, among which Accumoli, Amatrice and Arquata del Tronto. The earthquake was recorded by about 350 seismic stations, causing 299 fatalities and damage with macroseismic intensities up to 11. The maximum acceleration was observed at Amatrice station (AMT) reaching 916 cm s–2 on E–W component, with epicentral distance of 15 km and Joyner and Boore distance to the fault surface (RJB) of less than a kilometre. Motivated by the high levels of observed ground motion and damage, we generate broad-band seismograms for engineering purposes by adopting a hybrid method. To infer the low frequency seismograms, we considered the kinematic slip model by Tinti et al . The high frequency seismograms were produced using a stochastic finite-fault model approach based on dynamic corner-frequency. Broadband synthetic time-series were therefore obtained by merging the low and high frequency seismograms. Simulated hybrid ground motions were compared both with the observed ground motions and the ground-motion prediction equations (GMPEs), to explore their performance and to retrieve the region-specific parameters endorsed for the simulations. In the near-fault area we observed that hybrid simulations have a higher capability to detect near source effects and to reproduce the source complexity than the use of GMPEs. Indeed, the general good consistency found between synthetic and observed ground motion (both in the time and frequency domain), suggests that the use of regional-specific source scaling and attenuation parameters together with the source complexity in hybrid simulations improves ground motion estimations. To include the site effect in stochastic simulations at selected stations, we tested the use of amplification curves derived from HVRSs (horizontal-to-vertical response spectra) and from HVSRs (horizontal-to-vertical spectral ratios) rather than the use of generic curves according to NTC18 Italian seismic design code. We generally found a further reduction of residuals between observed and simulated both in terms of time histories and spectra.624 115 - Some of the metrics are blocked by yourconsent settings
Tipo di elemento:Pubblicazione, Access status: Open Access , Effect of Shallow Slip Amplification Uncertainty on Probabilistic Tsunami Hazard Analysis in Subduction Zones: Use of Long-Term Balanced Stochastic Slip Models
(2020); ; ; ; Selva, JacopoThe complexity of coseismic slip distributions influences the tsunami hazard posed by local and, to a certain extent, distant tsunami sources. Large slip concentrated in shallow patches was observed in recent tsunamigenic earthquakes, possibly due to dynamic amplification near the free surface, variable frictional conditions or other factors. We propose a method for incorporating enhanced shallow slip for subduction earthquakes while preventing systematic slip excess at shallow depths over one or more seismic cycles. The method uses the classic k−2 stochastic slip distributions, augmented by shallow slip amplification. It is necessary for deep events with lower slip to occur more often than shallow ones with amplified slip to balance the long-term cumulative slip. We evaluate the impact of this approach on tsunami hazard in the central and eastern Mediterranean Sea adopting a realistic 3D geometry for three subduction zones, by using it to model ~ 150,000 earthquakes with 𝑀𝑤 from 6.0 to 9.0. We combine earthquake rates, depth-dependent slip distributions, tsunami modeling, and epistemic uncertainty through an ensemble modeling technique. We found that the mean hazard curves obtained with our method show enhanced probabilities for larger inundation heights as compared to the curves derived from depth-independent slip distributions. Our approach is completely general and can be applied to any subduction zone in the world.1142 149 - Some of the metrics are blocked by yourconsent settings
Tipo di elemento:Pubblicazione, Access status: Open Access , NEAMTHM18 Documentation: the making of the TSUMAPS-NEAM Tsunami Hazard Model 2018
(2019-09-12); ; ; ; The NEAM Tsunami Hazard Model 2018 (NEAMTHM18) is a probabilistic hazard model for tsunamis generated by earthquakes. It covers the coastlines of the North-East Atlantic, the Mediterranean, and connected Seas (NEAM). In this online data product, the hazard results are provided by hazard curves calculated at 2,343 Points of Interest (POI), distributed in the North-East Atlantic (1,076 POIs), the Mediterranean Sea (1,130 POIs), and the Black Sea (137 POIs) at an average spacing of ~20 km. For each POI, hazard curves are given for the mean, 2nd, 16th, 50th, 84th, and 98th percentiles. Maps derived from hazard curves are Probability maps for Maximum Inundation Heights (MIH) of 1, 2, 5, 10, 20 meters; Hazard maps for Average Return Periods (ARP) of 500, 1,000, 2,500, 5,000, 10,000 years. For each map, precalculated displays are provided for the mean, the 16th percentile, and the 84th percentile. All data are also made accessible through an interactive web mapper and through Open Geospatial Consortium standard protocols. The model was prepared in the framework of the European Project TSUMAPS-NEAM (http://www.tsumaps-neam.eu/) funded by the mechanism of the European Civil Protection and Humanitarian Aid Operations (grant no. ECHO/SUB/2015/718568/PREV26).382 614 - Some of the metrics are blocked by yourconsent settings
Tipo di elemento:Pubblicazione, Access status: Open Access , Hibrid broadband Ground-Motion Simulations for the 2016 Amatrice Earthquake, Central Italy, and Sensitivity of Ground-Motion to Earthquake Source Parameters
On 24th August 2016 at 01:36 UTC a MW 6.0 earthquake struck several villages in central Italy, among which Accumoli, Amatrice and Arquata del Tronto. It caused 299 fatalities, major destruction and extensive damage in the surrounding area (up to 11 intensity degree). The earthquake was recorded by 350 digital accelerometers be- longing to the National Accelerometric Network (RAN) of the Italian Department of Civil Protection, to the National Seismic Network (Rete Sismica Nazionale, RSN) of the Istituto Nazionale di Geofisica e Vulcanologia (INGV), and to other local net- works. This earthquake ruptured a NW–SE oriented normal fault, according the prevailing extensional tectonics of the area.The maximum accelera- tion was observed at Amatrice station (AMT) with epicentral distance of 15 km, reaching 916 cm/s2 and 445.6 cm/s2 on E-W and N-S components, respectively. Motivated by the high levels of observed ground motion and damage, we have computed synthetics broadband time series for engineering purposes. To produce high-frequency seismograms, we have used a stochastic finite-fault model approach based on dynamic corner-frequency.120 228 - Some of the metrics are blocked by yourconsent settings
Tipo di elemento:Prodotto, Access status: Open Access , 159 456 - Some of the metrics are blocked by yourconsent settings
Tipo di elemento:Pubblicazione, Access status: Open Access , Self-similar slip distributions on irregular shaped faults
We propose a strategy to place a self-similar slip distribution on a complex fault surface that is represented by an unstructured mesh. This is possible by applying a strategy based on the composite source model where a hierarchical set of asperities, each with its own slip function which is dependent on the distance from the asperity centre. Central to this technique is the efficient, accurate computation of distance between two points on the fault surface. This is known as the geodetic distance problem. We propose a method to compute the distance across complex non-planar surfaces based on a corollary of the Huygens’ principle. The difference between this method compared to others sample-based algorithms which precede it is the use of a curved front at a local level to calculate the distance. This technique produces a highly accurate computation of the distance as the curvature of the front is linked to the distance from the source. Our local scheme is based on a sequence of two trilaterations, producing a robust algorithm which is highly precise. We test the strategy on a planar surface in order to assess its ability to keep the self-similarity properties of a slip distribution. We also present a synthetic self-similar slip distribution on a real slab topography for a M 8.5 event. This method for computing distance may be extended to the estimation of first arrival times in both complex 3D surfaces or 3D volumes.64 100 - Some of the metrics are blocked by yourconsent settings
Tipo di elemento:Pubblicazione, Access status: Open Access , Bayesian rupture imaging in a complex medium: The 29 May 2012 Emilia, Northern Italy, earthquake
(2017-07-31); ; ; ; We develop a new approach to image earthquake rupture from strong motion data. We use a large data set of aftershock waveforms, interpolated over the seismic fault to obtain Green’s function approximations. Next we deploy a Bayesian inversion method to characterize the slip distribution, the rupture velocity, the slip duration, and their uncertainties induced by errors in the Green’s functions. The method is applied to the 29 May 2012 Mw 6 Emilia earthquake, which ruptured a fault buried below the Po Plain sediments (Northern Italy). Despite the particularly complex wave propagation, the near-field strong motion observations are well reproduced with 15 rupture parameters. The rupture and slip velocities were notably slow (~0.5 Vs and <0.5 m/s, respectively), implying that the fault was difficult to break. This method opens some perspectives for earthquake rupture studies in areas where numerical simulations suffer from imprecise knowledge of the velocity structure.198 146
