Skip to main content
The search returned 57 results
Now showing 1 - 10 of 57
  • Some of the metrics are blocked by your 
    Item type:Publication, Access status: Restricted ,

    Very fast canyon formation and evolution along active volcanic flanks: A case from Stromboli Island

    Active insular volcanoes are generally characterized by their rapid morphological evolution, as a close interplay exists between eruptive activity and erosive-depositional processes in such volcanoes. The Sciara del Fuoco depression, a sector collapse scar on the NW flank of the Stromboli volcano (Italy), is considered a natural laboratory for studying the response of a volcanic slope to such a dynamic evolution. In this study, we report the very fast morphological evolution that affected the subaerial and submarine Sciara del Fuoco slope from May 2022 to May 2023, a period of time marked by the occurrence of two crater rim failures, pyroclastic density currents and multiple lava flows. The analysis of repeated topo-bathymetric surveys demonstrates that a narrow (100 m wide at maximum) and steep-sided canyon, tens of meters deep, formed in the central part of the Sciara del Fuoco. The canyon was mainly related to the erosive activity of the pyroclastic density currents, which led to the remobilization of (at least) 3.7 × 106 m3 volcanic material, mainly in the subaerial slope. The canyon was initially formed by retrogressive erosion upslope, starting from an initial submarine/coastal landslide. It then evolved through a progressive widening of its flanks through small-scale landslides. The study shows that landslide location, as well as the final canyon shape, were strongly controlled by the lithological limits of pre- vious lava flows, highlighting the importance of inherited morpho-stratigraphy and lateral heterogeneities in slope stability. Since its formation, the canyon has acted as a main conduit for lava flows and volcaniclastic materials supplied on their way to the sea. About 1 × 106 m3 of material filled the subaerial canyon floor through time, and another 1 × 106 m3 of slope accretion was estimated for the submarine part of the Sciara del Fuoco, down to 400 m below sea level. Comparing the volumes associated with slope erosion and accretion, it is evident that a large part of the remobilized material bypassed the Sciara del Fuoco shallow-water sector and was emplaced at greater depths. This study highlights the relevance of an integrated system for monitoring the submarine and subaerial morphological evolution of insular volcanic flanks, contributing to an improved geo- hazard assessment during eruptive crises.
      8
  • Some of the metrics are blocked by your 
    Item type:Publication, Access status: Open Access ,
      11  49
  • Some of the metrics are blocked by your 
    Item type:Publication, Access status: Open Access ,

    UAS-based mapping of the July 3, 2019, ballistics density distribution on the W flank of Stromboli with uncertainty quantification

    Stromboli is a volcanic island in a persistent state of activity, located off the northern coast of Sicily. The paroxysms have been the most powerful explosive phenomena at Stromboli in the last 150 years. These explosions can produce ballistic projectiles that can heavily affect trails and observation sites as well as hit inhabited areas at lower elevations, down to the coast. On July 3, 2019, a paroxysm significantly affected a great portion of the island with ballistic projectiles. In particular, many decimeter and meter-sized spatter bombs hit the W flank of Stromboli, and ignited multiple fires. In May 2022, we conducted an Unmanned Aerial System photogrammetric campaign over a sector of the W flank of Stromboli that was heavily affected by the paroxysm. The largest clasts were still preserved after 3 years, not disturbed by significant mass wasting phenomena or human interference, and they were not yet hidden by the post-fire regrowth of the brush vegetation. In this study, we constrained the main sources of uncertainty affecting the bombs distribution on the ground, by characterizing a percentage of uncertain clasts, testing various density estimators, and by modeling an areal buffer around the mapped clasts. We produced a 0.18 km2 wide 1.6-cm resolution orthomosaic, a 10-cm resolution Digital Surface Model, and 2813 outlines of the mapped ballistics. Spatial distribution of the ground cover and associated uncertainty were analyzed as a function of the distance and of the angular direction from the source.
      59  81
  • Some of the metrics are blocked by your 
    Item type:Publication, Access status: Open Access ,

    Generation of deposit-derived pyroclastic density currents by repeated crater rim failures at Stromboli Volcano (Italy)

    The gravitational instability of hot material deposited during eruptive activity can lead to the formation of glowing avalanches, commonly known as deposit-derived pyroclastic density currents (PDCs). These currents can travel hundreds of metres to several kilometres from the source at exceptionally high temperatures, posing a catastrophic hazard to areas surrounding steep-slope volcanoes. The occurrence of deposit-derived PDCs is often associated with crater rim failure, which can be triggered by various factors such as magma thrust from dike injection, magma fingering, bulging or less commonly, powerful explosions. Here, the in-depth study of data from the multi-parametric monitoring network operating on Stromboli (Italy), including video surveillance, seismicity and ground deformation data, complemented by remote topographic sensing data, has facilitated the understanding of the events leading to the crater rim collapse on 9 October and 4 December 2022. The failures resulted in the remobilisation of 6.4 ± 1.0 × 103 m3 and 88.9 ± 26.7 × 103 m3 of material for the 9 October and the 4 December 2022, respectively, which propagated as PDCs along the NW side of the volcano and reached the sea in a few tens of seconds. These events were characterised by a preparatory phase marked by an increase in magmatic pressure in the preceding weeks, which correlated with an increase in the displacement rate of the volcano’s summit. There was also an escalation in explosive degassing, evidenced by spattering accompanied by seismic tremors in the hours before the collapse. These events have been interpreted as an initial increase in magma vesicularity, followed by the release of gas once percolation threshold was reached. The degassing process induced densification of the magma, resulting in increased thrust on the conduit walls due to increased magmastatic pressure. This phase coincided with crater rim collapse, often followed or accompanied by the onset of lava overflow phases. A mechanism similar to the one proposed may shed light on similar phenomena observed at other volcanoes. The analysis performed in this study highlights the need for a multi-parametric and multi-platform approach to fully understand such complex phenomena. By integrating different data sources, including seismic, deformation and remote sensing data, it is possible to identify the phenomena associated with the different phases leading to crater rim collapse and the subsequent development of deposit-derived PDCs.
      98  222
  • Some of the metrics are blocked by your 
    Item type:Publication, Access status: Open Access ,

    The March 2023 UAS-based high-resolution Digital Surface Model and orthomosaic of the NE flank of Stromboli volcano (Sicily, Italy)

    Stromboli is a volcanic island in a persistent state of activity, located in the Tyrrhenian Sea off the northern coast of Sicily. During the night of 25 and 26 May 2022, a massive human-caused wildfire destroyed most of the vegetation cover on the NE flank of the island, just above the main village. On 12 August 2022, a particularly heavy rainfall event remobilized the loose volcaniclastic deposits that covered the burned volcanic flank, no longer protected by the vegetation. This event triggered several debris flows that were channeled by the roads and flooded several streets and buildings, causing severe damage to the village. In late-March 2023, just before the large spring vegetation growth, we conducted an Unmanned Aerial System (UAS) photogrammetric campaign over a sector of the NE flank of Stromboli Island, to acquire data on an area massively affected by the wildfire first and by the debris flows later. Here we present and share with the scientific community and civil authorities the results of this UAS campaign, which consists of a 1.4 km2 wide 10 cm-resolution Digital Surface Model (DSM) and 1.6 cm-resolution orthomosaic. These data clearly show the dramatic consequences of the 2022 tragic events at Stromboli. We also produced an elevation difference map by comparing the 2023 DSM here generated and the 2012 LiDAR DEM to provide a first overview of the thickness of the deposits that were removed from the Stromboli NE flank.
      194  158
  • Some of the metrics are blocked by your 
    Item type:Publication, Access status: Open Access ,

    Geomorphology of the upper sector of the Roncovetro active landslide (Emilia-Romagna Region, Italy)

    We present the geomorphological map of the upper sector of the Roncovetro active landslide (Enza Valley, Emilia-Romagna, Italy). The 1:1500 scale map provides an accurate picture of the landslide in October 2014. The map is mainly based on the data collected during an airborne LiDAR survey. The capability of LiDAR to ‘penetrate’ the vegetation cover makes these data the most complete and accurate topographic dataset of this landslide. The map shows that the upper sector of the Roncovetro landslide consists of gravity- and water runoff-related forms. Gravitational features are linked to sliding and flowing movements that characterize the short- and long-term behaviour of the landslide. By comparing the 2014 LiDAR-Digital Elevation Model (DEM) with the 1973 DEM provided by the Emilia-Romagna Region, we calculated that 6.2 ± 0.8 × 105 m3 of material has moved from the top of the Roncovetro landslide in about 40 years.
      310  112
  • Some of the metrics are blocked by your 
    Item type:Publication, Access status: Open Access ,

    Relative seismic and tsunami risk assessment for Stromboli Island (Italy)

    An innovative method of estimating the relative risk of buildings exposed to seismic and tsunami hazards in volcanic islands is applied to Stromboli (Italy), a well-known stratovolcano affected by moderate earthquakes and mass-flow-induced tsunamis. The method uses a pre-existing quali-quantitative analysis to assess the relative risk indices of buildings, which provide comparative results useful for prioritisation purposes, in combination with a historical-geographical settlement analysis consistent with the ‘territorialist’ approach to the urban and regional planning and design. The quali-quantitative analysis is based on a new proposed survey-sheet model, useful to collect building information necessary for the relative risk estimation, whereas the historical-geographical investigation is based on the multi-temporal comparison of aerial and satellite images. The proposal to combine two consolidated methods represents an innovation in estimating relative risk. Considering that Stromboli Island had never been subjected to similar analyses, the results of the relative seismic risk assessment are novel and moreover identify buildings with a fairly-low and spatially-uniform relative risk. The results of the relative tsunami risk assessment are consistent with results of similar past studies, identifying buildings with a higher relative risk index on the northern coast of the island. The combined use of a building-by-building survey with a multi-temporal analysis of settlements allows obtaining a higher detail than previously available for the region. If adequately modified, the proposed combination of methods allows assessing relative risk also considering other geo-environmental hazards and their cascading effects, in a multi-hazard risk assessment perspective.
      86  181
  • Some of the metrics are blocked by your 
    Item type:Publication, Access status: Open Access ,

    Subaerial-submarine morphological changes at Stromboli volcano (Italy) induced by the 2019–2020 eruptive activity

    This study analyses the morphological changes induced by eruptive activity at Stromboli volcano (Italy) during and after events occurring during July–August 2019. This period was characterized by intense eruptive activity (two paroxysmal explosions, a two-month-long lava emission, and more intense and frequent “ordinary” explosive activity) that produced significant changes within the region known as Sciara del Fuoco, located on the most unstable, north-western flank of the volcano. Since September 2019, the eruptive activity waned but remained intense, and erosive phenomena continued to contribute to the re-shaping of the Sciara del Fuoco. The morphological changes described here were documented by integrating topographic (PLÉIADES satellite tri-stereo Digital Elevation Models) and multibeam bathymetric data, acquired before, during, and after the paroxysmal events. This allowed the study of the cumulative effect of the different processes and the characterization of the different phases of accumulation/emplacement, erosion, remobilization and re-sedimentation of the volcaniclastic materials. Data acquired at several periods between September 2018 and April 2020, allowed a comparison of the subaerial and submarine effects of the 2019 events. We find evidence of localized, significant erosion following the two pyroclastic density currents triggered by the paroxysmal explosion of the 3 July 2019. We interpret this erosion as being caused by submarine and subaerial landslides triggered by the propagation of pyroclastic density currents down the Sciara del Fuoco slope. Immediately after the explosion, a lava field accumulated on the sub-aerial slope, produced by effusive activity which lasted about two months. Subsequently, the newly emplaced lava, and in particular its breccia, was eroded, with the transfer of material onto the submarine slope. This work demonstrates how repeated topo-bathymetric surveys allowed identification of the slope processes that were triggered in response to the rapid geomorphological variations due to the eruptive activity. The surveys also allowed distinction of whether estimated volumetric losses were the result of single mass-flows or gradual erosive processes, with implications on the related geohazard. Furthermore, this work highlights how submarine slope failures can be triggered by the entry into the water of pyroclastic density currents, even of modest size. These results are important for the development and improvement of an early warning system for tsunami-induced by mass flows, both in Stromboli and for island-based and coastal volcanoes elsewhere, where landslides and pyroclastic density currents can trigger significant, potentially destructive, tsunami waves.
      125  123
  • Some of the metrics are blocked by your 
    Item type:Publication, Access status: Restricted ,

    Structure of the Shallow Supply System at Stromboli Volcano, Italy, through Integration of Muography, Digital Elevation Models, Seismicity, and Ground Deformation Data

    Muography represents a recent and innovative tool for investigating the interior of active volcanoes. However, when dealing with frequently erupting open-vent volcanoes such as Stromboli, any result should take into con- sideration the structural and morphology changes caused by the eruptive activity. This may cause either summit collapses by magma withdrawal, or morphology growth by the accumulations of a fallout from the explosive activity, or more often a combination of both. In this chapter, we present an integration of various techniques, comprising muography and digital elevation model reconstruction, together with GBInSAR ground deformation and volcano seismicity, to reconstruct the geometry of the shallow magma supply system of the volcano and its changes in time. We show how muography can display the interior of the volcano as well as its outer growth, being sensitive to all volume changes that occurred between the framed surface and the detector. This was discovered in Stromboli by comparing digital topography in the interval between 2010 and 2012, when the rapid growth of the volcano summit by the accumulation of ballistic products in the area between the crater zone and the muon detec- tor occurred. This deposit, together with the filling in of the graben-like depression, formed during the 2007 eruption, by fallout during the persistent explosive activity, contributed to generating a remarkable anomaly in the summit area of the volcano visualized by muography. In addition, the shallow feeding system of the volcano was surveyed by GBInSAR and seismicity, which allowed us to reconstruct its path up to a depth of a few hundred meters.
      42  3
  • Some of the metrics are blocked by your 
    Item type:Publication, Access status: Open Access ,

    Modelling Erosion and Floods in Volcanic Environment: The Case Study of the Island of Vulcano (Aeolian Archipelago, Italy)

    The re-mobilization of volcaniclastic material poses a hazard factor which, although it decreases with time since the last eruption, remains present in the hydrographic basins of volcanic areas. Herein, we present the results of the numerical modelling of erosive phenomena of volcanic deposits, as well as of flooding in the volcanic area. The proposed approach includes runoff estimation, land use analysis, and the application of hydraulic and erosion modelling. It exploits the Iber software, a widely used and validated model for rainfall-runoff, river flooding, and erosion and sediment transport modelling. The methodology was applied to the Island of Vulcano (Italy), known for the erosion phenomena that affect the slopes of one of its volcanic cones (La Fossa cone). The rainfall excess was calculated using a 19-year dataset of hourly precipitations, and the curve number expressed by the information on soil cover in the area, derived from the land cover and land use analysis. The erosion and flow models were performed considering different rainfall scenarios. Results show a particularly strong erosion, with thicknesses greater than 0.4 m. This is consistent with field observations, in particular with some detailed data collected both after intense events and by long-term observation. Results of the hydraulic simulations show that moderate and torrential rainfall scenarios can lead to flood levels between 0.2 and 0.6 m, which mostly affect the harbours located in the island’s inhabited area.
      182  78